Skip to content

Debian Installer Bookworm RC3 released

Linux
  • Seit ein paar Tagen ist der RC3 verfügbar. Debian Installer Bookworm RC3

    Improvements in this release

    • finish-install:
      • Adjust APT cache cleaning to avoid breaking bash completion
        (#1034650).
    • grub-installer:
      • Detect EFI boot variables with hexadecimal digits, not only
        decimal digits.
    • hw-detect:
      • Restore support for firmware license prompts (#1033921).
    • linux:
      • Build against updated dwarves, reducing its size and memory
        footprint (#1033301).
    • partman-base:
      • Add support for input submitted using power-of-two units: kiB,
        MiB, GiB, etc. (#913431). Note that sizes are still output using
        power-of-ten units: kB, MB, GB, etc.
      • Add support for bigger prefixes: petabyte (PB), pebibyte (PiB),
        exabyte (EB), and exbibyte (EiB).
      • With many thanks to Vincent Danjean!
    • preseed:
      • Make sure netcfg considers DHCP-provided hostnames, only using
        the hostname parameter on the kernel command line as a fallback
        (#1035349).

    Hardware support changes

    • debian-installer:
      • Ship dedicated DRM modules for bochs and cirrus to avoid broken
        graphics under UEFI/Secure Boot (#1036019).
    • linux:
      • Work around black screen on ppc64el (#1033058).
    • xorg-server:
      • Ship modesetting_drv.so in the udeb again, fixing graphical
        installer support on UTM (#1035014).

    Localization status

    • 78 languages are supported in this release.
    • Full translation for 41 of them.

    Known bugs in this release

    • There seems to be no known major bug as of yet.

    See the errata[2] for details and a full list of known issues.

  • Nextcloud - Update auf 28.0.0

    Nextcloud
    5
    3
    0 Stimmen
    5 Beiträge
    476 Aufrufe
    FrankMF
    28.0.1 ist da. Den Log Reader wieder aktiviert. Gleiches Verhalten. Kann ich so leider nicht gebrauchen, also wieder deaktiviert.
  • Debian Bookworm 12 - Timeshift mit btrfs

    Linux
    2
    0 Stimmen
    2 Beiträge
    279 Aufrufe
    FrankMF
    Und hier github issue bei Timeshift https://github.com/linuxmint/timeshift/issues/157#issuecomment-1612536952
  • Passkeys

    Linux
    2
    0 Stimmen
    2 Beiträge
    235 Aufrufe
    FrankMF
    Passend dazu aus dem Bitwarden Blog https://bitwarden.com/blog/bitwarden-passkey-management/
  • VisionFive2 - Armbian

    Software
    1
    1
    0 Stimmen
    1 Beiträge
    89 Aufrufe
    Niemand hat geantwortet
  • Mainline 5.12.x

    Images
    2
    0 Stimmen
    2 Beiträge
    329 Aufrufe
    FrankMF
    5.12.0-1149-ayufan released ayufan: defconfig: add MT76x* drivers
  • OpenWRT - Zonen

    Verschoben OpenWRT & Ubiquiti ER-X
    2
    3
    0 Stimmen
    2 Beiträge
    600 Aufrufe
    FrankMF
    Es ist was heller geworden [image: 1610188645165-7b86e97c-31a5-44b6-809f-25d9d1c2ee4a-image.png] Die besagte Forward Regel [image: 1610188840619-zonen.png] Diese Forward Regel zieht erst dann, wenn es mehrere Interfaces in einer Zone gibt. Aus der Doku INPUT rules for a zone describe what happens to traffic trying to reach the router itself through an interface in that zone. OUTPUT rules for a zone describe what happens to traffic originating from the router itself going through an interface in that zone. FORWARD rules for a zone describe what happens to traffic passing between different interfaces belonging in the same zone. Das heisst nun, das ein Forwarding zwischen zwei Zonen immer eine spezifische Regel unter Traffic Rules benötigt. Forwarding between zones always requires a specific rule. Somit ist ein Forwarding zwischen zwei Zonen in den Standard Einstellungen nicht erlaubt. Das kann ich hier auch so bestätigen. Das ist ja auch das was ich mit meiner "DMZ"-Zone erreichen möchte. Kein Zugriff auf LAN. Unter Zone ⇒ Forwardings kann man jetzt sehen, das das Forwarding von LAN in Richtung WAN und DMZ erlaubt ist. WAN ist logisch, sonst komme ich ja nicht ins Internet. DMZ habe ich eingestellt, damit ich auch Teilnehmer im DMZ Netz erreichen kann, wenn ich da mal ran muss. [image: 1610189307657-8a548c29-8bc5-4074-8099-66460bcea9a8-image.png] Stelle ich das jetzt so ein. [image: 1610189398985-dca8b393-f613-4cab-a377-ffbc2bb8ddf5-image.png] Dann kann ich von der DMZ Zone aus das LAN erreichen. Aha, so langsam verstehe ich Quelle: https://forum.openwrt.org/t/firewall-zones-and-settings/84369
  • Nextcloud - Desktop Integration

    Nextcloud
    1
    3
    0 Stimmen
    1 Beiträge
    295 Aufrufe
    Niemand hat geantwortet
  • Debian Buster 10 Release

    Linux
    3
    1
    0 Stimmen
    3 Beiträge
    415 Aufrufe
    FrankMF
    Da man ja beim Login auswählen kann, mit was die Session startet, war ich doch jetzt etwas neugierig was überhaupt läuft. [image: 1562484643462-img_20190707_092217.jpg] frank@debian:~$ echo $WAYLAND_DISPLAY frank@debian:~$ loginctl SESSION UID USER SEAT TTY 7 1000 frank seat0 tty2 c1 116 Debian-gdm seat0 tty1 2 sessions listed. frank@debian:~$ loginctl show-session c1 -p Type Type=x11 frank@debian:~$ loginctl show-session c1 Id=c1 User=116 Name=Debian-gdm Timestamp=Sat 2019-07-06 22:43:34 CEST TimestampMonotonic=30094837 VTNr=1 Seat=seat0 TTY=tty1 Remote=no Service=gdm-launch-environment Scope=session-c1.scope Leader=1015 Audit=4294967295 Type=x11 Class=greeter Active=no State=online IdleHint=yes IdleSinceHint=1562446130937731 IdleSinceHintMonotonic=346278596 LockedHint=yes Die Installation der Nvidia Treiber macht da wohl einen x11 Desktop raus. Aber auch nicht weiter schlimm, der Wayland lief ja hier überhaupt nicht. Würde mich aber über interessante Links zum Thema freuen