Quartz64 - Modell B - Was geht? (Peter Geis Image)

[FrankM]

Peter Geis Entwicklungsumgebung

Funktion	Status	Bemerkung
cpufreq	ok	*3
UART	ja	*5
LAN	ja	*1
USB3	ja	ca. 210MB/s *2
PCIe	ja	ca. 296 MB/s, ist mit einer Lane angeschlossen *4
HDMI	nein

LAN *1

root@debian:~# iperf3 -c 192.168.3.213
Connecting to host 192.168.3.213, port 5201
[  5] local 192.168.3.10 port 39124 connected to 192.168.3.213 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   434 KBytes  3.55 Mbits/sec   61   2.83 KBytes       
[  5]   1.00-2.00   sec   475 KBytes  3.89 Mbits/sec   44   2.83 KBytes       
[  5]   2.00-3.00   sec   396 KBytes  3.24 Mbits/sec   43   2.83 KBytes       
[  5]   3.00-4.00   sec   318 KBytes  2.61 Mbits/sec   40   2.83 KBytes       
[  5]   4.00-5.00   sec   315 KBytes  2.58 Mbits/sec   31   2.83 KBytes       
[  5]   5.00-6.00   sec   396 KBytes  3.24 Mbits/sec   46   2.83 KBytes       
[  5]   6.00-7.00   sec   396 KBytes  3.24 Mbits/sec   43   2.83 KBytes       
[  5]   7.00-8.00   sec   396 KBytes  3.24 Mbits/sec   43   1.41 KBytes       
[  5]   8.00-9.00   sec   396 KBytes  3.24 Mbits/sec   47   2.83 KBytes       
[  5]   9.00-10.00  sec   317 KBytes  2.59 Mbits/sec   39   2.83 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  3.75 MBytes  3.14 Mbits/sec  437             sender
[  5]   0.00-10.00  sec  3.67 MBytes  3.08 Mbits/sec                  receiver
 
iperf Done.
root@debian:~# iperf3 -R -c 192.168.3.213
Connecting to host 192.168.3.213, port 5201
Reverse mode, remote host 192.168.3.213 is sending
[  5] local 192.168.3.10 port 39130 connected to 192.168.3.213 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec   112 MBytes   941 Mbits/sec                  
[  5]   1.00-2.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   2.00-3.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   3.00-4.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   4.00-5.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   5.00-6.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   6.00-7.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   7.00-8.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   8.00-9.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   9.00-10.00  sec   112 MBytes   942 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.10 GBytes   943 Mbits/sec  370             sender
[  5]   0.00-10.00  sec  1.10 GBytes   942 Mbits/sec                  receiver
 
iperf Done.

Mit diesem Fix ist das Problem gelöst

USB3 *2

root@debian:~# lsusb
Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. JMS578 SATA 6Gb/s
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Disk /dev/sda: 238.47 GiB, 256060514304 bytes, 500118192 sectors
Disk model: Generic         
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 05AB264B-738E-47BB-9F67-5C04CC24A736

Device     Start       End   Sectors   Size Type
/dev/sda1   2048 500118158 500116111 238.5G Linux filesystem
root@debian:~# mount /dev/sda1 /mnt/sda/
root@debian:~# cd /mnt/sda
root@debian:/mnt/sda# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct
4096+0 records in
4096+0 records out
17179869184 bytes (17 GB, 16 GiB) copied, 81.5051 s, 211 MB/s

--------------

root@debian:/# lsusb
Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 003: ID 04e8:61f5 Samsung Electronics Co., Ltd Portable SSD T5
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


root@debian:/mnt/sda# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct
4096+0 records in
4096+0 records out
17179869184 bytes (17 GB, 16 GiB) copied, 83.7618 s, 205 MB/s

cpufreq *3

root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_max_freq
1800000
1800000
1800000
1800000

root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq
1416000
1416000
1416000
1416000
root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq
1800000
1800000
1800000
1800000
root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq
1416000
1416000
1416000
1416000

PCIe NVMe SSD *4

root@debian:/mnt/nvme# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct
4096+0 records in
4096+0 records out
17179869184 bytes (17 GB, 16 GiB) copied, 58.0362 s, 296 MB/s

Das soll laut Peter die maximal mögliche Geschwindigkeit der PCIe Schnittstelle sein. Diese Schnittstelle ist nur mit einer Lane an den Prozessor angeschlossen!

UART *5

Bitte drauf achten, diese Schnittstelle arbeitet mit Level Shifting, was billige Adapter oft nicht abkönnen. Habe ich hier im Beitrag ausführlich erklärt, mit passenden Adapter, wenn es so wie bei mir nicht funktionierte.