Skip to content
linux-nerds.org

linux-nerds.org
  1. Übersicht
  2. Pine64
  3. Quartz64
  4. Quartz64 - sbc-bench

Quartz64 - sbc-bench

Verschoben Quartz64
  • FrankMF

    @tkaiser Die Ergebnisse findet man hier

    Meckert noch über iostat

    ./sbc-bench.sh: Zeile 738: iostat: Kommando nicht gefunden.

    Habe ich jetzt bei Manjaro auf die Schnelle nicht gefunden. Aber Jetzt ist Feierabend 🙂

    sbc-bench v0.7.7 Pine64 RK3566 Quartz64-A Board (Wed, 30 Jun 2021 22:04:09 +0200)

LSB Version:	n/a
Distributor ID:	Manjaro-ARM
Description:	Manjaro ARM Linux
Release:	21.06
Codename:	n/a
Architecture:	aarch64

/usr/sbin/gcc (GCC) 10.2.0

Uptime: 22:04:10 up 6 min,  1 user,  load average: 0.13, 0.21, 0.12



               total        used        free      shared  buff/cache   available
Mem:           3.8Gi       120Mi       3.4Gi        16Mi       290Mi       3.6Gi
Swap:          5.7Gi          0B       5.7Gi

Filename				Type		Size		Used		Priority
/dev/zram0                              partition	5990608		0		100

##########################################################################

Checking cpufreq OPP:

No cpufreq support available. Measured on cpu1: 814.914/814.965/815.005

##########################################################################

tinymembench v0.4.9 (simple benchmark for memory throughput and latency)

==========================================================================
== Memory bandwidth tests                                               ==
==                                                                      ==
== Note 1: 1MB = 1000000 bytes                                          ==
== Note 2: Results for 'copy' tests show how many bytes can be          ==
==         copied per second (adding together read and writen           ==
==         bytes would have provided twice higher numbers)              ==
== Note 3: 2-pass copy means that we are using a small temporary buffer ==
==         to first fetch data into it, and only then write it to the   ==
==         destination (source -> L1 cache, L1 cache -> destination)    ==
== Note 4: If sample standard deviation exceeds 0.1%, it is shown in    ==
==         brackets                                                     ==
==========================================================================

 C copy backwards                                     :   1283.3 MB/s (0.5%)
 C copy backwards (32 byte blocks)                    :   1285.9 MB/s (0.1%)
 C copy backwards (64 byte blocks)                    :   1243.6 MB/s (0.1%)
 C copy                                               :   1742.2 MB/s
 C copy prefetched (32 bytes step)                    :    968.4 MB/s (0.2%)
 C copy prefetched (64 bytes step)                    :   1641.9 MB/s
 C 2-pass copy                                        :    966.6 MB/s
 C 2-pass copy prefetched (32 bytes step)             :    840.0 MB/s (0.3%)
 C 2-pass copy prefetched (64 bytes step)             :    935.7 MB/s (0.2%)
 C fill                                               :   3263.3 MB/s
 C fill (shuffle within 16 byte blocks)               :   3262.7 MB/s
 C fill (shuffle within 32 byte blocks)               :   3264.4 MB/s
 C fill (shuffle within 64 byte blocks)               :   3260.4 MB/s
 ---
 standard memcpy                                      :   1739.1 MB/s
 standard memset                                      :   3263.9 MB/s
 ---
 NEON LDP/STP copy                                    :   1747.5 MB/s
 NEON LDP/STP copy pldl2strm (32 bytes step)          :   1129.0 MB/s
 NEON LDP/STP copy pldl2strm (64 bytes step)          :   1513.9 MB/s
 NEON LDP/STP copy pldl1keep (32 bytes step)          :   1437.7 MB/s
 NEON LDP/STP copy pldl1keep (64 bytes step)          :   1771.3 MB/s
 NEON LD1/ST1 copy                                    :   1750.0 MB/s
 NEON STP fill                                        :   3265.1 MB/s
 NEON STNP fill                                       :   2794.1 MB/s (0.5%)
 ARM LDP/STP copy                                     :   1747.7 MB/s
 ARM STP fill                                         :   3264.0 MB/s
 ARM STNP fill                                        :   2801.2 MB/s (0.6%)

==========================================================================
== Memory latency test                                                  ==
==                                                                      ==
== Average time is measured for random memory accesses in the buffers   ==
== of different sizes. The larger is the buffer, the more significant   ==
== are relative contributions of TLB, L1/L2 cache misses and SDRAM      ==
== accesses. For extremely large buffer sizes we are expecting to see   ==
== page table walk with several requests to SDRAM for almost every      ==
== memory access (though 64MiB is not nearly large enough to experience ==
== this effect to its fullest).                                         ==
==                                                                      ==
== Note 1: All the numbers are representing extra time, which needs to  ==
==         be added to L1 cache latency. The cycle timings for L1 cache ==
==         latency can be usually found in the processor documentation. ==
== Note 2: Dual random read means that we are simultaneously performing ==
==         two independent memory accesses at a time. In the case if    ==
==         the memory subsystem can't handle multiple outstanding       ==
==         requests, dual random read has the same timings as two       ==
==         single reads performed one after another.                    ==
==========================================================================

block size : single random read / dual random read
      1024 :    0.0 ns          /     0.0 ns 
      2048 :    0.0 ns          /     0.0 ns 
      4096 :    0.0 ns          /     0.0 ns 
      8192 :    0.0 ns          /     0.0 ns 
     16384 :    1.4 ns          /     2.0 ns 
     32768 :   10.6 ns          /    16.8 ns 
     65536 :   25.8 ns          /    36.7 ns 
    131072 :   33.3 ns          /    44.0 ns 
    262144 :   39.5 ns          /    47.3 ns 
    524288 :   44.3 ns          /    50.3 ns 
   1048576 :  123.0 ns          /   173.7 ns 
   2097152 :  165.4 ns          /   215.5 ns 
   4194304 :  187.8 ns          /   230.0 ns 
   8388608 :  217.8 ns          /   266.0 ns 
  16777216 :  237.0 ns          /   290.0 ns 
  33554432 :  250.5 ns          /   308.0 ns 
  67108864 :  257.9 ns          /   322.1 ns 

##########################################################################

OpenSSL 1.1.1k, built on 25 Mar 2021
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes  16384 bytes
aes-128-cbc      74792.03k   217625.37k   423797.76k   555217.58k   610432.34k   615262.89k
aes-128-cbc      74622.64k   217872.49k   422695.00k   555940.52k   611322.54k   615830.87k
aes-192-cbc      70978.37k   193649.77k   343041.11k   427766.78k   460193.79k   462738.77k
aes-192-cbc      66020.61k   181392.34k   333752.32k   421592.06k   459300.86k   461897.73k
aes-256-cbc      68721.14k   177780.29k   296409.60k   357050.03k   379658.24k   381359.45k
aes-256-cbc      66476.48k   170601.19k   288141.48k   354874.37k   379423.40k   381190.14k

##########################################################################

7-Zip (a) [64] 17.04 : Copyright (c) 1999-2021 Igor Pavlov : 2017-08-28
p7zip Version 17.04 (locale=de_DE.UTF-8,Utf16=on,HugeFiles=on,64 bits,4 CPUs LE)

LE
CPU Freq: 64000000 - - - - 256000000 512000000 - -

RAM size:    3900 MB,  # CPU hardware threads:   4
RAM usage:    882 MB,  # Benchmark threads:      4

                       Compressing  |                  Decompressing
Dict     Speed Usage    R/U Rating  |      Speed Usage    R/U Rating
         KiB/s     %   MIPS   MIPS  |      KiB/s     %   MIPS   MIPS

22:        488    99    479    475  |       9328   100    800    796
23:        473    99    486    482  |       9164   100    797    793
24:        452    99    490    487  |       8977    99    792    788
25:        434    99    500    496  |       8776    99    785    781
----------------------------------  | ------------------------------
Avr:              99    489    485  |               99    794    789
Tot:              99    641    637

##########################################################################

7-Zip (a) [64] 17.04 : Copyright (c) 1999-2021 Igor Pavlov : 2017-08-28
p7zip Version 17.04 (locale=de_DE.UTF-8,Utf16=on,HugeFiles=on,64 bits,4 CPUs LE)

LE
CPU Freq: 64000000 - - 64000000 - - - - -

RAM size:    3900 MB,  # CPU hardware threads:   4
RAM usage:    882 MB,  # Benchmark threads:      4

                       Compressing  |                  Decompressing
Dict     Speed Usage    R/U Rating  |      Speed Usage    R/U Rating
         KiB/s     %   MIPS   MIPS  |      KiB/s     %   MIPS   MIPS

22:       1498   319    458   1458  |      37149   392    808   3169
23:       1451   327    453   1479  |      36574   393    806   3165
24:       1433   336    459   1542  |      35833   391    804   3146
25:       1422   348    467   1624  |      34593   388    794   3079
----------------------------------  | ------------------------------
Avr:             332    459   1526  |              391    803   3140
Tot:             362    631   2333

7-Zip (a) [64] 17.04 : Copyright (c) 1999-2021 Igor Pavlov : 2017-08-28
p7zip Version 17.04 (locale=de_DE.UTF-8,Utf16=on,HugeFiles=on,64 bits,4 CPUs LE)

LE
CPU Freq: - - - 64000000 - - - - 2048000000

RAM size:    3900 MB,  # CPU hardware threads:   4
RAM usage:    882 MB,  # Benchmark threads:      4

                       Compressing  |                  Decompressing
Dict     Speed Usage    R/U Rating  |      Speed Usage    R/U Rating
         KiB/s     %   MIPS   MIPS  |      KiB/s     %   MIPS   MIPS

22:       1501   318    459   1461  |      36984   390    809   3155
23:       1455   326    456   1483  |      36571   392    808   3164
24:       1454   339    461   1564  |      35724   390    804   3136
25:       1427   349    468   1630  |      34842   390    795   3101
----------------------------------  | ------------------------------
Avr:             333    461   1534  |              390    804   3139
Tot:             362    632   2337

7-Zip (a) [64] 17.04 : Copyright (c) 1999-2021 Igor Pavlov : 2017-08-28
p7zip Version 17.04 (locale=de_DE.UTF-8,Utf16=on,HugeFiles=on,64 bits,4 CPUs LE)

LE
CPU Freq: 64000000 - - - - - - - 2048000000

RAM size:    3900 MB,  # CPU hardware threads:   4
RAM usage:    882 MB,  # Benchmark threads:      4

                       Compressing  |                  Decompressing
Dict     Speed Usage    R/U Rating  |      Speed Usage    R/U Rating
         KiB/s     %   MIPS   MIPS  |      KiB/s     %   MIPS   MIPS

22:       1482   315    458   1442  |      37339   394    808   3186
23:       1454   325    455   1482  |      36391   391    805   3149
24:       1441   337    460   1550  |      35802   393    800   3143
25:       1429   349    468   1632  |      34985   392    795   3114
----------------------------------  | ------------------------------
Avr:             332    460   1526  |              392    802   3148
Tot:             362    631   2337

Compression: 1526,1534,1526
Decompression: 3140,3139,3148
Total: 2333,2337,2337

##########################################################################

Testing clockspeeds again. System health now:

Time      CPU n/a    load %cpu %sys %usr %nice %io %irq   Temp
22:32:47:   ---      3.97  96%   2%  93%   0%   0%   0%  56.7°C

Checking cpufreq OPP:

No cpufreq support available. Measured on cpu1: 814.764/815.005/813.170

##########################################################################

System health while running tinymembench:

Time      CPU n/a    load %cpu %sys %usr %nice %io %irq   Temp
22:04:12:   ---      0.20   4%   1%   1%   0%   0%   0%  45.6°C
22:06:12:   ---      0.93  25%   0%  24%   0%   0%   0%  46.7°C
22:08:12:   ---      0.99  25%   0%  25%   0%   0%   0%  46.1°C
22:10:12:   ---      1.00  25%   0%  25%   0%   0%   0%  46.1°C

System health while running OpenSSL benchmark:

Time      CPU n/a    load %cpu %sys %usr %nice %io %irq   Temp
22:11:07:   ---      1.00  14%   0%  13%   0%   0%   0%  46.7°C
22:11:17:   ---      1.00  25%   0%  25%   0%   0%   0%  47.2°C
22:11:27:   ---      1.00  26%   0%  25%   0%   0%   0%  47.2°C
22:11:38:   ---      1.00  25%   0%  25%   0%   0%   0%  47.8°C
22:11:48:   ---      1.00  25%   0%  25%   0%   0%   0%  47.8°C
22:11:58:   ---      1.00  25%   0%  25%   0%   0%   0%  47.8°C
22:12:08:   ---      1.00  25%   0%  24%   0%   0%   0%  46.7°C
22:12:18:   ---      1.00  25%   0%  24%   0%   0%   0%  47.2°C
22:12:28:   ---      1.00  26%   0%  25%   0%   0%   0%  46.1°C
22:12:38:   ---      1.00  25%   0%  25%   0%   0%   0%  46.1°C
22:12:48:   ---      1.00  25%   0%  25%   0%   0%   0%  46.1°C

System health while running 7-zip single core benchmark:

Time      CPU n/a    load %cpu %sys %usr %nice %io %irq   Temp
22:12:55:   ---      1.00  16%   0%  14%   0%   0%   0%  46.1°C
22:13:56:   ---      2.11  25%   0%  24%   0%   0%   0%  46.7°C
22:14:56:   ---      3.31  25%   0%  24%   0%   0%   0%  46.7°C
22:15:56:   ---      3.11  25%   0%  24%   0%   0%   0%  46.7°C
22:16:56:   ---      3.68  25%   0%  24%   0%   0%   0%  46.7°C
22:17:56:   ---      3.42  25%   0%  24%   0%   0%   0%  46.1°C
22:18:56:   ---      3.50  25%   0%  24%   0%   0%   0%  46.7°C
22:19:56:   ---      3.90  25%   0%  24%   0%   0%   0%  46.7°C
22:20:56:   ---      2.93  25%   1%  24%   0%   0%   0%  46.7°C
22:21:56:   ---      3.02  25%   1%  24%   0%   0%   0%  46.7°C
22:22:56:   ---      3.20  25%   0%  24%   0%   0%   0%  47.2°C

System health while running 7-zip multi core benchmark:

Time      CPU n/a    load %cpu %sys %usr %nice %io %irq   Temp
22:23:38:   ---      3.62  19%   0%  18%   0%   0%   0%  47.2°C
22:24:03:   ---      3.73  85%   1%  83%   0%   0%   0%  53.8°C
22:24:25:   ---      3.89  92%   1%  90%   0%   0%   0%  51.2°C
22:24:49:   ---      3.80  97%   0%  96%   0%   0%   0%  55.0°C
22:25:10:   ---      4.07  83%   2%  80%   0%   0%   0%  52.5°C
22:25:33:   ---      4.17  97%   0%  96%   0%   0%   0%  56.1°C
22:25:54:   ---      4.16  75%   2%  72%   0%   0%   0%  51.9°C
22:26:14:   ---      4.47  92%   2%  89%   0%   0%   0%  52.5°C
22:26:40:   ---      4.33  97%   1%  94%   0%   0%   0%  56.1°C
22:27:00:   ---      4.09  75%   1%  72%   0%   0%   0%  51.2°C
22:27:22:   ---      4.06  99%   0%  98%   0%   0%   0%  56.1°C
22:27:47:   ---      4.11  88%   1%  86%   0%   0%   0%  56.1°C
22:28:09:   ---      4.18  87%   1%  84%   0%   0%   0%  53.8°C
22:28:34:   ---      4.19  95%   1%  93%   0%   0%   0%  56.7°C
22:28:55:   ---      3.96  81%   1%  78%   0%   0%   0%  52.5°C
22:29:16:   ---      4.02  90%   1%  88%   0%   0%   0%  53.1°C
22:29:41:   ---      4.02  96%   2%  93%   0%   0%   0%  56.1°C
22:30:03:   ---      3.87  78%   1%  76%   0%   0%   0%  53.1°C
22:30:27:   ---      3.85  96%   0%  95%   0%   0%   0%  56.7°C
22:30:53:   ---      4.09  90%   1%  88%   0%   0%   0%  56.1°C
22:31:14:   ---      3.94  86%   1%  84%   0%   0%   0%  53.8°C
22:31:40:   ---      4.10  95%   1%  92%   0%   0%   0%  56.7°C
22:32:01:   ---      3.76  81%   1%  79%   0%   0%   0%  53.8°C
22:32:21:   ---      3.77  90%   2%  86%   0%   0%   0%  53.8°C
22:32:47:   ---      3.97  96%   2%  93%   0%   0%   0%  56.7°C

##########################################################################

dmesg output while running the benchmarks:

[  626.027598] audit: type=1100 audit(1625083670.721:80): pid=1151 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='op=PAM:authentication grantors=pam_shells,pam_faillock,pam_permit,pam_faillock acct="frank" exe="/usr/bin/sshd" hostname=192.168.3.213 addr=192.168.3.213 terminal=ssh res=success'
[  626.039591] audit: type=1101 audit(1625083670.731:81): pid=1151 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="frank" exe="/usr/bin/sshd" hostname=192.168.3.213 addr=192.168.3.213 terminal=ssh res=success'
[  626.045995] audit: type=1103 audit(1625083670.731:82): pid=1151 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock acct="frank" exe="/usr/bin/sshd" hostname=192.168.3.213 addr=192.168.3.213 terminal=ssh res=success'
[  626.046537] audit: type=1006 audit(1625083670.741:83): pid=1151 uid=0 subj=kernel old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[  626.046569] audit: type=1300 audit(1625083670.741:83): arch=c00000b7 syscall=64 success=yes exit=4 a0=3 a1=ffffc66cdd90 a2=4 a3=ffff8f547440 items=0 ppid=452 pid=1151 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="sshd" exe="/usr/bin/sshd" subj=kernel key=(null)
[  626.046594] audit: type=1327 audit(1625083670.741:83): proctitle=737368643A206672616E6B205B707269765D
[  626.110244] audit: type=1105 audit(1625083670.801:84): pid=1151 uid=0 auid=1000 ses=3 subj=kernel msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="frank" exe="/usr/bin/sshd" hostname=192.168.3.213 addr=192.168.3.213 terminal=ssh res=success'
[  626.117874] audit: type=1103 audit(1625083670.811:85): pid=1153 uid=0 auid=1000 ses=3 subj=kernel msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock acct="frank" exe="/usr/bin/sshd" hostname=192.168.3.213 addr=192.168.3.213 terminal=ssh res=success'
[  902.908769] audit: type=1130 audit(1625083947.597:86): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  902.909838] audit: type=1131 audit(1625083947.607:87): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

##########################################################################



               total        used        free      shared  buff/cache   available
Mem:           3.8Gi       174Mi       3.3Gi        16Mi       296Mi       3.6Gi
Swap:          5.7Gi          0B       5.7Gi

Filename				Type		Size		Used		Priority
/dev/zram0                              partition	5990608		0		100

Architecture:                    aarch64
CPU op-mode(s):                  32-bit, 64-bit
Byte Order:                      Little Endian
CPU(s):                          4
On-line CPU(s) list:             0-3
Vendor ID:                       ARM
Model name:                      Cortex-A55
Model:                           0
Thread(s) per core:              1
Core(s) per cluster:             4
Socket(s):                       -
Cluster(s):                      1
Stepping:                        r2p0
BogoMIPS:                        48.00
Flags:                           fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
Vulnerability Itlb multihit:     Not affected
Vulnerability L1tf:              Not affected
Vulnerability Mds:               Not affected
Vulnerability Meltdown:          Not affected
Vulnerability Spec store bypass: Not affected
Vulnerability Spectre v1:        Mitigation; __user pointer sanitization
Vulnerability Spectre v2:        Not affected
Vulnerability Srbds:             Not affected
Vulnerability Tsx async abort:   Not affected

    Im Fediverse -> @FrankM@nrw.social

    1. NanoPi R5S
    2. Quartz64 Model B, 4GB RAM
    3. Quartz64 Model A, 4GB RAM
    4. RockPro64 v2.1
    0
  • FrankMF

    Ach so, noch was Wichtiges. Alles OHNE Kühlkörper usw.

    Im Fediverse -> @FrankM@nrw.social

    1. NanoPi R5S
    2. Quartz64 Model B, 4GB RAM
    3. Quartz64 Model A, 4GB RAM
    4. RockPro64 v2.1
    0
  • T

    Danke für den ersten Test. Mainline-Kernel ist aktuell noch auf 816 MHz CPU-Takt festgenagelt, d.h. da macht benchmarken wenig Sinn. 🙂

    Falls Du mit dem anderen Image, das den 4.19er BSP-Kernel verwendet, testen solltest, wird das sicherlich mehr als doppelt so hohe Scores liefern...

    Wegen dem fehlenden iostat: https://discover.manjaro.org/packages/sysstat

    1
  • FrankMF

    @tkaiser Danke Thomas für die Ausführungen.

    Jetzt weiß ich auch, warum das Ding sich so zäh anfühlt.

    Im Fediverse -> @FrankM@nrw.social

    1. NanoPi R5S
    2. Quartz64 Model B, 4GB RAM
    3. Quartz64 Model A, 4GB RAM
    4. RockPro64 v2.1
    0
  • FrankMF

    Der Ordnung halber der Test vom Debian Image, was aber auch Mainline nutzt.

    Link Preview Image
     

    favicon

    (ix.io)

    Im Fediverse -> @FrankM@nrw.social

    1. NanoPi R5S
    2. Quartz64 Model B, 4GB RAM
    3. Quartz64 Model A, 4GB RAM
    4. RockPro64 v2.1
    0
  • T

    Danke schön, ich hab's mal aufgenommen.

    Witzig ist, dass cpufreq scaling mit dem Debian-Image funktioniert aber thermals nicht gehen. Egal, die Werte sehen plausibel aus, wenn auch ein wenig zu niedrig. Aber evtl. geht noch was bei DRAM-Initialisierung und mit 200 MHz mehr CPU-Takt.

    Jedenfalls trat kein Throttling auf und ich vermute, dass auf Deinem RK3566 immer noch kein Heatsink klebt und weit und breit kein Lüfter in der Nähe ist, oder? 🙂

    1
  • FrankMF

    @tkaiser Nein, kein Kühler und kein Lüfter. Nacktes Board 😁

    Im Fediverse -> @FrankM@nrw.social

    1. NanoPi R5S
    2. Quartz64 Model B, 4GB RAM
    3. Quartz64 Model A, 4GB RAM
    4. RockPro64 v2.1
    0
  • FrankMF FrankM verschob dieses Thema von Quartz64 am
  • FrankMF FrankM verschob dieses Thema von Quartz64 - A am

  • FrankMF

    Quartz64 - Model A - 4K Bildschirmauflösung

    Quartz64
    1
    0 Stimmen
    1 Beiträge
    75 Aufrufe
    Niemand hat geantwortet
  • FrankMF

    Quartz64 - Modell B - eMMC

    Quartz64 - B
    1
    0 Stimmen
    1 Beiträge
    169 Aufrufe
    Niemand hat geantwortet
  • FrankMF

    Kernel 5.19-rc1

    Quartz64
    2
    0 Stimmen
    2 Beiträge
    142 Aufrufe
    FrankMF

    Man kann dann den aktuell Kernel

    [root@frank-pc ~]# uname -a Linux frank-pc 5.17.0-3-MANJARO-ARM-Q64 #1 SMP PREEMPT Sat Jun 4 14:34:03 UTC 2022 aarch64 GNU/Linux

    mit diesem Befehl aktualisieren

    sudo pacman -S linux-rc linux-rc-headers

    Man wechselt dann vom Zweig linux-quartz64 auf linux-rc. Der Zweig linux-rc entspricht dem Mainline Kernel.

    Achtung! Zum Zeitpunkt der Erstellung des Beitrages crasht das Eure Installation!!

    Ursache ist, das es aktuell diesen Kernel

    linux-rc-5.18.rc7-7-aarch64

    installiert, dieser enthält aber keine Unterstützung für das Modell B.

    Und zum Nachschauen, ob schon was Neues da ist 😉

    [root@frank-pc ~]# pacman -Ss linux-rc linux-rc-headers core/linux-rc-headers 5.18.rc7-7 Header files and scripts for building modules for linux kernel - AArch64 multi-platform (release candidate)
  • FrankMF

    Quartz64 - Modell B - Manjaro Rootverzeichnis ändern

    Quartz64
    3
    0 Stimmen
    3 Beiträge
    123 Aufrufe
    FrankMF

    Da gab es doch gestern noch einen bösen Fehler, als ich vom Kernel Linux 5.17.0-2 auf Linux 5.17.0-3 aktualisiert habe, war das System danach kaputt. Hmm, ich habe dann versucht das zu untersuchen und war zu der Erkenntnis gekommen, das das Boot Verzeichnis nicht korrekt gemountet war. Konnte es aber nicht selber lösen 😞

    Dan hat das dann heute erledigt, wenn man jetzt das Image installiert, dann ist auch das Boot Verzeichnis korrekt gemountet.

    [root@frank-pc ~]# df -h Dateisystem Größe Benutzt Verf. Verw% Eingehängt auf dev 1,7G 0 1,7G 0% /dev run 1,9G 1,2M 1,9G 1% /run /dev/sda1 458G 4,5G 430G 2% / tmpfs 1,9G 0 1,9G 0% /dev/shm tmpfs 1,9G 9,6M 1,9G 1% /tmp /dev/mmcblk0p1 458M 41M 417M 9% /boot tmpfs 374M 44K 374M 1% /run/user/1000 /dev/mmcblk0p2 59G 3,7G 52G 7% /run/media/frank/ROOT_MNJRO

    Dann sollte das auch klappen, wenn man wie ich aktuell das Root Verzeichnis auf die SSD am USB3 Port gelegt hat.

  • FrankMF

    Quartz64 - Modell B - Peter Geis Entwicklungsumgebung

    Images
    2
    0 Stimmen
    2 Beiträge
    123 Aufrufe
    FrankMF
    Was geht? Funktion Status Bemerkung cpufreq ok *3 UART ja *5 LAN hat Fehler *1 USB3 ja ca. 210MB/s *2 PCIe ja ca. 296 MB/s, ist mit einer Lane angeschlossen *4 HDMI nein LAN *1 root@debian:~# iperf3 -c 192.168.3.213 Connecting to host 192.168.3.213, port 5201 [ 5] local 192.168.3.10 port 39124 connected to 192.168.3.213 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 434 KBytes 3.55 Mbits/sec 61 2.83 KBytes [ 5] 1.00-2.00 sec 475 KBytes 3.89 Mbits/sec 44 2.83 KBytes [ 5] 2.00-3.00 sec 396 KBytes 3.24 Mbits/sec 43 2.83 KBytes [ 5] 3.00-4.00 sec 318 KBytes 2.61 Mbits/sec 40 2.83 KBytes [ 5] 4.00-5.00 sec 315 KBytes 2.58 Mbits/sec 31 2.83 KBytes [ 5] 5.00-6.00 sec 396 KBytes 3.24 Mbits/sec 46 2.83 KBytes [ 5] 6.00-7.00 sec 396 KBytes 3.24 Mbits/sec 43 2.83 KBytes [ 5] 7.00-8.00 sec 396 KBytes 3.24 Mbits/sec 43 1.41 KBytes [ 5] 8.00-9.00 sec 396 KBytes 3.24 Mbits/sec 47 2.83 KBytes [ 5] 9.00-10.00 sec 317 KBytes 2.59 Mbits/sec 39 2.83 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 3.75 MBytes 3.14 Mbits/sec 437 sender [ 5] 0.00-10.00 sec 3.67 MBytes 3.08 Mbits/sec receiver iperf Done. root@debian:~# iperf3 -R -c 192.168.3.213 Connecting to host 192.168.3.213, port 5201 Reverse mode, remote host 192.168.3.213 is sending [ 5] local 192.168.3.10 port 39130 connected to 192.168.3.213 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 112 MBytes 941 Mbits/sec [ 5] 1.00-2.00 sec 112 MBytes 942 Mbits/sec [ 5] 2.00-3.00 sec 112 MBytes 942 Mbits/sec [ 5] 3.00-4.00 sec 112 MBytes 942 Mbits/sec [ 5] 4.00-5.00 sec 112 MBytes 942 Mbits/sec [ 5] 5.00-6.00 sec 112 MBytes 942 Mbits/sec [ 5] 6.00-7.00 sec 112 MBytes 942 Mbits/sec [ 5] 7.00-8.00 sec 112 MBytes 942 Mbits/sec [ 5] 8.00-9.00 sec 112 MBytes 942 Mbits/sec [ 5] 9.00-10.00 sec 112 MBytes 942 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.10 GBytes 943 Mbits/sec 370 sender [ 5] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec receiver iperf Done. USB3 *2 root@debian:~# lsusb Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. JMS578 SATA 6Gb/s Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Disk /dev/sda: 238.47 GiB, 256060514304 bytes, 500118192 sectors Disk model: Generic Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 05AB264B-738E-47BB-9F67-5C04CC24A736 Device Start End Sectors Size Type /dev/sda1 2048 500118158 500116111 238.5G Linux filesystem root@debian:~# mount /dev/sda1 /mnt/sda/ root@debian:~# cd /mnt/sda root@debian:/mnt/sda# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 81.5051 s, 211 MB/s -------------- root@debian:/# lsusb Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 003: ID 04e8:61f5 Samsung Electronics Co., Ltd Portable SSD T5 Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@debian:/mnt/sda# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 83.7618 s, 205 MB/s cpufreq *3 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_max_freq 1800000 1800000 1800000 1800000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1416000 1416000 1416000 1416000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1800000 1800000 1800000 1800000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1416000 1416000 1416000 1416000 PCIe NVMe SSD *4 root@debian:/mnt/nvme# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 58.0362 s, 296 MB/s

    Das soll laut Peter die maximal mögliche Geschwindigkeit der PCIe Schnittstelle sein. Diese Schnittstelle ist nur mit einer Lane an den Prozessor angeschlossen!

    UART

    Bitte drauf achten, diese Schnittstelle arbeitet mit Level Shifting, was billige Adapter oft nicht abkönnen. Habe ich hier im Beitrag ausführlich erklärt, mit passenden Adapter, wenn es so wie bei mir nicht funktionierte.

  • FrankMF

    Quartz64 - Peter Geis Entwicklungsumgebung

    Images
    3
    0 Stimmen
    3 Beiträge
    151 Aufrufe
    FrankMF

    Das Ergebnis

    Screenshot_20211128_090851.png

    Peters Image benutzt ein Debian Buster 10

    root@quartz64:~# lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: buster

    Kernel

    root@quartz64:~# uname -a Linux quartz64 5.16.0-rc2 #1 SMP PREEMPT Sat Nov 27 03:43:14 UTC 2021 aarch64 GNU/Linux

    Gut an diesem Image vom Peter ist der funktionierende PCIe Port 🙂 Nicht so gut ist das Image, wenn man längerfristig damit arbeiten möchte. Der Aufbau ist dafür nicht wirklich gut geeignet. Wenn man das möchte, dann benutzt man lieber das Manjaro Image. Das wird gepflegt und man bekommt alle Änderungen und Patches auch geliefert.

    Ich hoffe, das die PCIe Patches auch bald im Manjaro Image ankommen, doch dafür müssen diese Upstream sein weil das Manjaro diesen Kernel nutzt (linux-rc). Und wie ich heute Morgen gelesen habe, es besteht Hoffnung für einen funktionierenden USB3-Port 🤗

  • FrankMF

    Quartz64 - Boot Order

    Angeheftet Hardware
    1
    0 Stimmen
    1 Beiträge
    349 Aufrufe
    Niemand hat geantwortet
  • FrankMF

    Pine64 Neuigkeiten Mai 2019

    ROCKPro64
    4
    0 Stimmen
    4 Beiträge
    382 Aufrufe
    FrankMF

    f28a1ff9-0ea8-4b25-8aea-6bec3cd495f9-grafik.png

    ✌