Skip to content
linux-nerds.org

linux-nerds.org
  1. Übersicht
  2. Pine64
  3. Quartz64
  4. Quartz64 - sbc-bench

Quartz64 - sbc-bench

Verschoben Quartz64
  • FrankMF

    @tkaiser Die Ergebnisse findet man hier

    Meckert noch über iostat

    ./sbc-bench.sh: Zeile 738: iostat: Kommando nicht gefunden.

    Habe ich jetzt bei Manjaro auf die Schnelle nicht gefunden. Aber Jetzt ist Feierabend 🙂

    sbc-bench v0.7.7 Pine64 RK3566 Quartz64-A Board (Wed, 30 Jun 2021 22:04:09 +0200)

LSB Version:	n/a
Distributor ID:	Manjaro-ARM
Description:	Manjaro ARM Linux
Release:	21.06
Codename:	n/a
Architecture:	aarch64

/usr/sbin/gcc (GCC) 10.2.0

Uptime: 22:04:10 up 6 min,  1 user,  load average: 0.13, 0.21, 0.12



               total        used        free      shared  buff/cache   available
Mem:           3.8Gi       120Mi       3.4Gi        16Mi       290Mi       3.6Gi
Swap:          5.7Gi          0B       5.7Gi

Filename				Type		Size		Used		Priority
/dev/zram0                              partition	5990608		0		100

##########################################################################

Checking cpufreq OPP:

No cpufreq support available. Measured on cpu1: 814.914/814.965/815.005

##########################################################################

tinymembench v0.4.9 (simple benchmark for memory throughput and latency)

==========================================================================
== Memory bandwidth tests                                               ==
==                                                                      ==
== Note 1: 1MB = 1000000 bytes                                          ==
== Note 2: Results for 'copy' tests show how many bytes can be          ==
==         copied per second (adding together read and writen           ==
==         bytes would have provided twice higher numbers)              ==
== Note 3: 2-pass copy means that we are using a small temporary buffer ==
==         to first fetch data into it, and only then write it to the   ==
==         destination (source -> L1 cache, L1 cache -> destination)    ==
== Note 4: If sample standard deviation exceeds 0.1%, it is shown in    ==
==         brackets                                                     ==
==========================================================================

 C copy backwards                                     :   1283.3 MB/s (0.5%)
 C copy backwards (32 byte blocks)                    :   1285.9 MB/s (0.1%)
 C copy backwards (64 byte blocks)                    :   1243.6 MB/s (0.1%)
 C copy                                               :   1742.2 MB/s
 C copy prefetched (32 bytes step)                    :    968.4 MB/s (0.2%)
 C copy prefetched (64 bytes step)                    :   1641.9 MB/s
 C 2-pass copy                                        :    966.6 MB/s
 C 2-pass copy prefetched (32 bytes step)             :    840.0 MB/s (0.3%)
 C 2-pass copy prefetched (64 bytes step)             :    935.7 MB/s (0.2%)
 C fill                                               :   3263.3 MB/s
 C fill (shuffle within 16 byte blocks)               :   3262.7 MB/s
 C fill (shuffle within 32 byte blocks)               :   3264.4 MB/s
 C fill (shuffle within 64 byte blocks)               :   3260.4 MB/s
 ---
 standard memcpy                                      :   1739.1 MB/s
 standard memset                                      :   3263.9 MB/s
 ---
 NEON LDP/STP copy                                    :   1747.5 MB/s
 NEON LDP/STP copy pldl2strm (32 bytes step)          :   1129.0 MB/s
 NEON LDP/STP copy pldl2strm (64 bytes step)          :   1513.9 MB/s
 NEON LDP/STP copy pldl1keep (32 bytes step)          :   1437.7 MB/s
 NEON LDP/STP copy pldl1keep (64 bytes step)          :   1771.3 MB/s
 NEON LD1/ST1 copy                                    :   1750.0 MB/s
 NEON STP fill                                        :   3265.1 MB/s
 NEON STNP fill                                       :   2794.1 MB/s (0.5%)
 ARM LDP/STP copy                                     :   1747.7 MB/s
 ARM STP fill                                         :   3264.0 MB/s
 ARM STNP fill                                        :   2801.2 MB/s (0.6%)

==========================================================================
== Memory latency test                                                  ==
==                                                                      ==
== Average time is measured for random memory accesses in the buffers   ==
== of different sizes. The larger is the buffer, the more significant   ==
== are relative contributions of TLB, L1/L2 cache misses and SDRAM      ==
== accesses. For extremely large buffer sizes we are expecting to see   ==
== page table walk with several requests to SDRAM for almost every      ==
== memory access (though 64MiB is not nearly large enough to experience ==
== this effect to its fullest).                                         ==
==                                                                      ==
== Note 1: All the numbers are representing extra time, which needs to  ==
==         be added to L1 cache latency. The cycle timings for L1 cache ==
==         latency can be usually found in the processor documentation. ==
== Note 2: Dual random read means that we are simultaneously performing ==
==         two independent memory accesses at a time. In the case if    ==
==         the memory subsystem can't handle multiple outstanding       ==
==         requests, dual random read has the same timings as two       ==
==         single reads performed one after another.                    ==
==========================================================================

block size : single random read / dual random read
      1024 :    0.0 ns          /     0.0 ns 
      2048 :    0.0 ns          /     0.0 ns 
      4096 :    0.0 ns          /     0.0 ns 
      8192 :    0.0 ns          /     0.0 ns 
     16384 :    1.4 ns          /     2.0 ns 
     32768 :   10.6 ns          /    16.8 ns 
     65536 :   25.8 ns          /    36.7 ns 
    131072 :   33.3 ns          /    44.0 ns 
    262144 :   39.5 ns          /    47.3 ns 
    524288 :   44.3 ns          /    50.3 ns 
   1048576 :  123.0 ns          /   173.7 ns 
   2097152 :  165.4 ns          /   215.5 ns 
   4194304 :  187.8 ns          /   230.0 ns 
   8388608 :  217.8 ns          /   266.0 ns 
  16777216 :  237.0 ns          /   290.0 ns 
  33554432 :  250.5 ns          /   308.0 ns 
  67108864 :  257.9 ns          /   322.1 ns 

##########################################################################

OpenSSL 1.1.1k, built on 25 Mar 2021
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes  16384 bytes
aes-128-cbc      74792.03k   217625.37k   423797.76k   555217.58k   610432.34k   615262.89k
aes-128-cbc      74622.64k   217872.49k   422695.00k   555940.52k   611322.54k   615830.87k
aes-192-cbc      70978.37k   193649.77k   343041.11k   427766.78k   460193.79k   462738.77k
aes-192-cbc      66020.61k   181392.34k   333752.32k   421592.06k   459300.86k   461897.73k
aes-256-cbc      68721.14k   177780.29k   296409.60k   357050.03k   379658.24k   381359.45k
aes-256-cbc      66476.48k   170601.19k   288141.48k   354874.37k   379423.40k   381190.14k

##########################################################################

7-Zip (a) [64] 17.04 : Copyright (c) 1999-2021 Igor Pavlov : 2017-08-28
p7zip Version 17.04 (locale=de_DE.UTF-8,Utf16=on,HugeFiles=on,64 bits,4 CPUs LE)

LE
CPU Freq: 64000000 - - - - 256000000 512000000 - -

RAM size:    3900 MB,  # CPU hardware threads:   4
RAM usage:    882 MB,  # Benchmark threads:      4

                       Compressing  |                  Decompressing
Dict     Speed Usage    R/U Rating  |      Speed Usage    R/U Rating
         KiB/s     %   MIPS   MIPS  |      KiB/s     %   MIPS   MIPS

22:        488    99    479    475  |       9328   100    800    796
23:        473    99    486    482  |       9164   100    797    793
24:        452    99    490    487  |       8977    99    792    788
25:        434    99    500    496  |       8776    99    785    781
----------------------------------  | ------------------------------
Avr:              99    489    485  |               99    794    789
Tot:              99    641    637

##########################################################################

7-Zip (a) [64] 17.04 : Copyright (c) 1999-2021 Igor Pavlov : 2017-08-28
p7zip Version 17.04 (locale=de_DE.UTF-8,Utf16=on,HugeFiles=on,64 bits,4 CPUs LE)

LE
CPU Freq: 64000000 - - 64000000 - - - - -

RAM size:    3900 MB,  # CPU hardware threads:   4
RAM usage:    882 MB,  # Benchmark threads:      4

                       Compressing  |                  Decompressing
Dict     Speed Usage    R/U Rating  |      Speed Usage    R/U Rating
         KiB/s     %   MIPS   MIPS  |      KiB/s     %   MIPS   MIPS

22:       1498   319    458   1458  |      37149   392    808   3169
23:       1451   327    453   1479  |      36574   393    806   3165
24:       1433   336    459   1542  |      35833   391    804   3146
25:       1422   348    467   1624  |      34593   388    794   3079
----------------------------------  | ------------------------------
Avr:             332    459   1526  |              391    803   3140
Tot:             362    631   2333

7-Zip (a) [64] 17.04 : Copyright (c) 1999-2021 Igor Pavlov : 2017-08-28
p7zip Version 17.04 (locale=de_DE.UTF-8,Utf16=on,HugeFiles=on,64 bits,4 CPUs LE)

LE
CPU Freq: - - - 64000000 - - - - 2048000000

RAM size:    3900 MB,  # CPU hardware threads:   4
RAM usage:    882 MB,  # Benchmark threads:      4

                       Compressing  |                  Decompressing
Dict     Speed Usage    R/U Rating  |      Speed Usage    R/U Rating
         KiB/s     %   MIPS   MIPS  |      KiB/s     %   MIPS   MIPS

22:       1501   318    459   1461  |      36984   390    809   3155
23:       1455   326    456   1483  |      36571   392    808   3164
24:       1454   339    461   1564  |      35724   390    804   3136
25:       1427   349    468   1630  |      34842   390    795   3101
----------------------------------  | ------------------------------
Avr:             333    461   1534  |              390    804   3139
Tot:             362    632   2337

7-Zip (a) [64] 17.04 : Copyright (c) 1999-2021 Igor Pavlov : 2017-08-28
p7zip Version 17.04 (locale=de_DE.UTF-8,Utf16=on,HugeFiles=on,64 bits,4 CPUs LE)

LE
CPU Freq: 64000000 - - - - - - - 2048000000

RAM size:    3900 MB,  # CPU hardware threads:   4
RAM usage:    882 MB,  # Benchmark threads:      4

                       Compressing  |                  Decompressing
Dict     Speed Usage    R/U Rating  |      Speed Usage    R/U Rating
         KiB/s     %   MIPS   MIPS  |      KiB/s     %   MIPS   MIPS

22:       1482   315    458   1442  |      37339   394    808   3186
23:       1454   325    455   1482  |      36391   391    805   3149
24:       1441   337    460   1550  |      35802   393    800   3143
25:       1429   349    468   1632  |      34985   392    795   3114
----------------------------------  | ------------------------------
Avr:             332    460   1526  |              392    802   3148
Tot:             362    631   2337

Compression: 1526,1534,1526
Decompression: 3140,3139,3148
Total: 2333,2337,2337

##########################################################################

Testing clockspeeds again. System health now:

Time      CPU n/a    load %cpu %sys %usr %nice %io %irq   Temp
22:32:47:   ---      3.97  96%   2%  93%   0%   0%   0%  56.7°C

Checking cpufreq OPP:

No cpufreq support available. Measured on cpu1: 814.764/815.005/813.170

##########################################################################

System health while running tinymembench:

Time      CPU n/a    load %cpu %sys %usr %nice %io %irq   Temp
22:04:12:   ---      0.20   4%   1%   1%   0%   0%   0%  45.6°C
22:06:12:   ---      0.93  25%   0%  24%   0%   0%   0%  46.7°C
22:08:12:   ---      0.99  25%   0%  25%   0%   0%   0%  46.1°C
22:10:12:   ---      1.00  25%   0%  25%   0%   0%   0%  46.1°C

System health while running OpenSSL benchmark:

Time      CPU n/a    load %cpu %sys %usr %nice %io %irq   Temp
22:11:07:   ---      1.00  14%   0%  13%   0%   0%   0%  46.7°C
22:11:17:   ---      1.00  25%   0%  25%   0%   0%   0%  47.2°C
22:11:27:   ---      1.00  26%   0%  25%   0%   0%   0%  47.2°C
22:11:38:   ---      1.00  25%   0%  25%   0%   0%   0%  47.8°C
22:11:48:   ---      1.00  25%   0%  25%   0%   0%   0%  47.8°C
22:11:58:   ---      1.00  25%   0%  25%   0%   0%   0%  47.8°C
22:12:08:   ---      1.00  25%   0%  24%   0%   0%   0%  46.7°C
22:12:18:   ---      1.00  25%   0%  24%   0%   0%   0%  47.2°C
22:12:28:   ---      1.00  26%   0%  25%   0%   0%   0%  46.1°C
22:12:38:   ---      1.00  25%   0%  25%   0%   0%   0%  46.1°C
22:12:48:   ---      1.00  25%   0%  25%   0%   0%   0%  46.1°C

System health while running 7-zip single core benchmark:

Time      CPU n/a    load %cpu %sys %usr %nice %io %irq   Temp
22:12:55:   ---      1.00  16%   0%  14%   0%   0%   0%  46.1°C
22:13:56:   ---      2.11  25%   0%  24%   0%   0%   0%  46.7°C
22:14:56:   ---      3.31  25%   0%  24%   0%   0%   0%  46.7°C
22:15:56:   ---      3.11  25%   0%  24%   0%   0%   0%  46.7°C
22:16:56:   ---      3.68  25%   0%  24%   0%   0%   0%  46.7°C
22:17:56:   ---      3.42  25%   0%  24%   0%   0%   0%  46.1°C
22:18:56:   ---      3.50  25%   0%  24%   0%   0%   0%  46.7°C
22:19:56:   ---      3.90  25%   0%  24%   0%   0%   0%  46.7°C
22:20:56:   ---      2.93  25%   1%  24%   0%   0%   0%  46.7°C
22:21:56:   ---      3.02  25%   1%  24%   0%   0%   0%  46.7°C
22:22:56:   ---      3.20  25%   0%  24%   0%   0%   0%  47.2°C

System health while running 7-zip multi core benchmark:

Time      CPU n/a    load %cpu %sys %usr %nice %io %irq   Temp
22:23:38:   ---      3.62  19%   0%  18%   0%   0%   0%  47.2°C
22:24:03:   ---      3.73  85%   1%  83%   0%   0%   0%  53.8°C
22:24:25:   ---      3.89  92%   1%  90%   0%   0%   0%  51.2°C
22:24:49:   ---      3.80  97%   0%  96%   0%   0%   0%  55.0°C
22:25:10:   ---      4.07  83%   2%  80%   0%   0%   0%  52.5°C
22:25:33:   ---      4.17  97%   0%  96%   0%   0%   0%  56.1°C
22:25:54:   ---      4.16  75%   2%  72%   0%   0%   0%  51.9°C
22:26:14:   ---      4.47  92%   2%  89%   0%   0%   0%  52.5°C
22:26:40:   ---      4.33  97%   1%  94%   0%   0%   0%  56.1°C
22:27:00:   ---      4.09  75%   1%  72%   0%   0%   0%  51.2°C
22:27:22:   ---      4.06  99%   0%  98%   0%   0%   0%  56.1°C
22:27:47:   ---      4.11  88%   1%  86%   0%   0%   0%  56.1°C
22:28:09:   ---      4.18  87%   1%  84%   0%   0%   0%  53.8°C
22:28:34:   ---      4.19  95%   1%  93%   0%   0%   0%  56.7°C
22:28:55:   ---      3.96  81%   1%  78%   0%   0%   0%  52.5°C
22:29:16:   ---      4.02  90%   1%  88%   0%   0%   0%  53.1°C
22:29:41:   ---      4.02  96%   2%  93%   0%   0%   0%  56.1°C
22:30:03:   ---      3.87  78%   1%  76%   0%   0%   0%  53.1°C
22:30:27:   ---      3.85  96%   0%  95%   0%   0%   0%  56.7°C
22:30:53:   ---      4.09  90%   1%  88%   0%   0%   0%  56.1°C
22:31:14:   ---      3.94  86%   1%  84%   0%   0%   0%  53.8°C
22:31:40:   ---      4.10  95%   1%  92%   0%   0%   0%  56.7°C
22:32:01:   ---      3.76  81%   1%  79%   0%   0%   0%  53.8°C
22:32:21:   ---      3.77  90%   2%  86%   0%   0%   0%  53.8°C
22:32:47:   ---      3.97  96%   2%  93%   0%   0%   0%  56.7°C

##########################################################################

dmesg output while running the benchmarks:

[  626.027598] audit: type=1100 audit(1625083670.721:80): pid=1151 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='op=PAM:authentication grantors=pam_shells,pam_faillock,pam_permit,pam_faillock acct="frank" exe="/usr/bin/sshd" hostname=192.168.3.213 addr=192.168.3.213 terminal=ssh res=success'
[  626.039591] audit: type=1101 audit(1625083670.731:81): pid=1151 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="frank" exe="/usr/bin/sshd" hostname=192.168.3.213 addr=192.168.3.213 terminal=ssh res=success'
[  626.045995] audit: type=1103 audit(1625083670.731:82): pid=1151 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock acct="frank" exe="/usr/bin/sshd" hostname=192.168.3.213 addr=192.168.3.213 terminal=ssh res=success'
[  626.046537] audit: type=1006 audit(1625083670.741:83): pid=1151 uid=0 subj=kernel old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[  626.046569] audit: type=1300 audit(1625083670.741:83): arch=c00000b7 syscall=64 success=yes exit=4 a0=3 a1=ffffc66cdd90 a2=4 a3=ffff8f547440 items=0 ppid=452 pid=1151 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="sshd" exe="/usr/bin/sshd" subj=kernel key=(null)
[  626.046594] audit: type=1327 audit(1625083670.741:83): proctitle=737368643A206672616E6B205B707269765D
[  626.110244] audit: type=1105 audit(1625083670.801:84): pid=1151 uid=0 auid=1000 ses=3 subj=kernel msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="frank" exe="/usr/bin/sshd" hostname=192.168.3.213 addr=192.168.3.213 terminal=ssh res=success'
[  626.117874] audit: type=1103 audit(1625083670.811:85): pid=1153 uid=0 auid=1000 ses=3 subj=kernel msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock acct="frank" exe="/usr/bin/sshd" hostname=192.168.3.213 addr=192.168.3.213 terminal=ssh res=success'
[  902.908769] audit: type=1130 audit(1625083947.597:86): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  902.909838] audit: type=1131 audit(1625083947.607:87): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

##########################################################################



               total        used        free      shared  buff/cache   available
Mem:           3.8Gi       174Mi       3.3Gi        16Mi       296Mi       3.6Gi
Swap:          5.7Gi          0B       5.7Gi

Filename				Type		Size		Used		Priority
/dev/zram0                              partition	5990608		0		100

Architecture:                    aarch64
CPU op-mode(s):                  32-bit, 64-bit
Byte Order:                      Little Endian
CPU(s):                          4
On-line CPU(s) list:             0-3
Vendor ID:                       ARM
Model name:                      Cortex-A55
Model:                           0
Thread(s) per core:              1
Core(s) per cluster:             4
Socket(s):                       -
Cluster(s):                      1
Stepping:                        r2p0
BogoMIPS:                        48.00
Flags:                           fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
Vulnerability Itlb multihit:     Not affected
Vulnerability L1tf:              Not affected
Vulnerability Mds:               Not affected
Vulnerability Meltdown:          Not affected
Vulnerability Spec store bypass: Not affected
Vulnerability Spectre v1:        Mitigation; __user pointer sanitization
Vulnerability Spectre v2:        Not affected
Vulnerability Srbds:             Not affected
Vulnerability Tsx async abort:   Not affected

    Im Fediverse -> @FrankM@nrw.social

    1. NanoPi R5S
    2. Quartz64 Model B, 4GB RAM
    3. Quartz64 Model A, 4GB RAM
    4. RockPro64 v2.1
    0
  • FrankMF

    Ach so, noch was Wichtiges. Alles OHNE Kühlkörper usw.

    Im Fediverse -> @FrankM@nrw.social

    1. NanoPi R5S
    2. Quartz64 Model B, 4GB RAM
    3. Quartz64 Model A, 4GB RAM
    4. RockPro64 v2.1
    0
  • T

    Danke für den ersten Test. Mainline-Kernel ist aktuell noch auf 816 MHz CPU-Takt festgenagelt, d.h. da macht benchmarken wenig Sinn. 🙂

    Falls Du mit dem anderen Image, das den 4.19er BSP-Kernel verwendet, testen solltest, wird das sicherlich mehr als doppelt so hohe Scores liefern...

    Wegen dem fehlenden iostat: https://discover.manjaro.org/packages/sysstat

    1
  • FrankMF

    @tkaiser Danke Thomas für die Ausführungen.

    Jetzt weiß ich auch, warum das Ding sich so zäh anfühlt.

    Im Fediverse -> @FrankM@nrw.social

    1. NanoPi R5S
    2. Quartz64 Model B, 4GB RAM
    3. Quartz64 Model A, 4GB RAM
    4. RockPro64 v2.1
    0
  • FrankMF

    Der Ordnung halber der Test vom Debian Image, was aber auch Mainline nutzt.

    Link Preview Image
     

    favicon

    (ix.io)

    Im Fediverse -> @FrankM@nrw.social

    1. NanoPi R5S
    2. Quartz64 Model B, 4GB RAM
    3. Quartz64 Model A, 4GB RAM
    4. RockPro64 v2.1
    0
  • T

    Danke schön, ich hab's mal aufgenommen.

    Witzig ist, dass cpufreq scaling mit dem Debian-Image funktioniert aber thermals nicht gehen. Egal, die Werte sehen plausibel aus, wenn auch ein wenig zu niedrig. Aber evtl. geht noch was bei DRAM-Initialisierung und mit 200 MHz mehr CPU-Takt.

    Jedenfalls trat kein Throttling auf und ich vermute, dass auf Deinem RK3566 immer noch kein Heatsink klebt und weit und breit kein Lüfter in der Nähe ist, oder? 🙂

    1
  • FrankMF

    @tkaiser Nein, kein Kühler und kein Lüfter. Nacktes Board 😁

    Im Fediverse -> @FrankM@nrw.social

    1. NanoPi R5S
    2. Quartz64 Model B, 4GB RAM
    3. Quartz64 Model A, 4GB RAM
    4. RockPro64 v2.1
    0
  • FrankMF FrankM verschob dieses Thema von Quartz64 am
  • FrankMF FrankM verschob dieses Thema von Quartz64 - A am

  • FrankMF

    Quartz64 - Plebian

    Quartz64
    2
    0 Stimmen
    2 Beiträge
    144 Aufrufe
    FrankMF

    Mal beim Kaffee eben ausprobieren.

    Die Releases findet man hier -> https://github.com/Plebian-Linux/quartz64-images/releases

    Und ein paar Anmerkungen zum Image -> https://github.com/Plebian-Linux/quartz64-images/blob/main/RUNNING.md

    User:pleb PW: pleb

    Passwort muss wie gewohnt beim ersten Start geändert werden.

    Danach habe ich das Debian aktualisiert

    apt update && apt upgrade

    Danach haben wir dann einen

    root@plebian-quartz64b:~# uname -a Linux plebian-quartz64b 6.1.0-1-arm64 #1 SMP Debian 6.1.4-1 (2023-01-07) aarch64 GNU/Linux

    recht aktuellen Kernel. Die Debian Version ist

    root@plebian-quartz64b:/etc# cat debian_version bookworm/sid

    Bookworm ist das kommende Debian 12, das soll so ca. im März(?) released werden.

    Mit blkid werden alle angeschlossenen Laufwerke angezeigt.

    root@plebian-quartz64b:/etc# blkid /dev/nvme0n1p1: UUID="497aa9d6-2e0c-4927-bb8f-9927970b1abe" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="bd856e70-94c0-3345-a9d6-7ff080b5a2e0" /dev/mmcblk0p3: LABEL="root" UUID="da21d2fe-1093-46d2-bd96-5fb6b11e07eb" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="root" PARTUUID="3fbd2cf5-e08d-4f39-8ca4-9fb5cff746df" /dev/mmcblk0p1: PARTLABEL="idbloader" PARTUUID="3eac6306-dee4-4c0c-9cfa-2d610b74b61b" /dev/mmcblk0p2: PARTLABEL="uboot" PARTUUID="7129c8a9-86f4-4807-be66-7d12398c6e9a" /dev/sda4: LABEL="linux-root" UUID="b1612f09-7ae0-4217-be0e-bdc2e51248d1" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="linux_root" PARTUUID="cdc03a35-d726-48f6-8bef-918981debbf6" /dev/sda2: SEC_TYPE="msdos" LABEL_FATBOOT="boot-efi" LABEL="boot-efi" UUID="6891-ACCB" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="boot_efi" PARTUUID="0af3de6b-3b38-42f3-ae0c-336c5d39c874" /dev/sda3: LABEL="linux-boot" UUID="e64ed73c-b603-43af-851c-d5eef81a1aa9" BLOCK_SIZE="1024" TYPE="ext4" PARTLABEL="linux_boot" PARTUUID="b3b30dbb-4dcb-4652-aef1-ebc720eb0e59" /dev/sda1: PARTLABEL="loader1" PARTUUID="86d433a9-c91b-48aa-9867-36ef588a600f"

    Man sieht meine angeschlossene NVMe SSD und die Platte am USB3.

    Man hat eine HDMI Ausgabe, Netzwerk ist klar, der WiFi-Chip geht nicht. Dazu steht im Readme

    Plebian (or Debian, for that matter) does not yet properly package the wireless firmware needed for the Model B or SOQuartz's Wi-Fi chip. Therefore, Wi-Fi won't work out of the box.

    Müsste man sich also mit beschäftigen....

    Ansonsten macht das für mich auf den ersten Blick einen soliden Eindruck.

  • FrankMF

    Quartz64 - Modell B - UART

    Angeheftet Quartz64 - B
    4
    0 Stimmen
    4 Beiträge
    190 Aufrufe
    FrankMF

    Um das hier zu komplettieren, habe ich mich gerade gefragt "Wo speichert er die Settings?"

    Ok, ich habe sie gefunden.

    /root/.minirc.dfl

    Inhalt

    # Diese Datei ist maschinell erzeugt. Bitte verwenden Sie das # Einstellungs-Menü im minicom-Programm, um die Einstellungen # zu ändern. pu rtscts No

    Jetzt habe ich ausreichend hier dokumentiert, falls ich da nochmal Probleme mit habe.

  • FrankMF

    Quartz64 - Peter Geis Entwicklungsumgebung

    Images
    3
    0 Stimmen
    3 Beiträge
    151 Aufrufe
    FrankMF

    Das Ergebnis

    Screenshot_20211128_090851.png

    Peters Image benutzt ein Debian Buster 10

    root@quartz64:~# lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: buster

    Kernel

    root@quartz64:~# uname -a Linux quartz64 5.16.0-rc2 #1 SMP PREEMPT Sat Nov 27 03:43:14 UTC 2021 aarch64 GNU/Linux

    Gut an diesem Image vom Peter ist der funktionierende PCIe Port 🙂 Nicht so gut ist das Image, wenn man längerfristig damit arbeiten möchte. Der Aufbau ist dafür nicht wirklich gut geeignet. Wenn man das möchte, dann benutzt man lieber das Manjaro Image. Das wird gepflegt und man bekommt alle Änderungen und Patches auch geliefert.

    Ich hoffe, das die PCIe Patches auch bald im Manjaro Image ankommen, doch dafür müssen diese Upstream sein weil das Manjaro diesen Kernel nutzt (linux-rc). Und wie ich heute Morgen gelesen habe, es besteht Hoffnung für einen funktionierenden USB3-Port 🤗

  • FrankMF

    Quartz64 - working HDMI output

    Verschoben Quartz64
    5
    0 Stimmen
    5 Beiträge
    223 Aufrufe
    FrankMF

    Das Problem mit dem Sound ist mit folgendem Kernel behoben

    [root@quartz64 ~]# uname -a Linux quartz64 5.16.0-rc1-6-MANJARO-ARM #1 SMP PREEMPT Sun Nov 21 15:42:16 UTC 2021 aarch64 GNU/Linux
  • FrankMF

    Quartz64 - Wireguard

    Verschoben Quartz64
    1
    0 Stimmen
    1 Beiträge
    237 Aufrufe
    Niemand hat geantwortet
  • FrankMF

    Quartz64 - PCIe Schnittstelle

    Verschoben Quartz64 - A
    1
    0 Stimmen
    1 Beiträge
    207 Aufrufe
    Niemand hat geantwortet
  • FrankMF

    Quartz64 - UART

    Angeheftet Verschoben Quartz64 - A
    2
    0 Stimmen
    2 Beiträge
    225 Aufrufe
    FrankMF

    Mein Quartz64 ist heute eingetroffen, mit einem Test Image des Manjaro Teams mal ausprobiert. Die UART-Schnittstelle funktioniert genau wie beim ROCKPro64. Also, nichts Neues für uns. UART Adapter anschließen und los geht es.

  • FrankMF

    Quartz64

    Verschoben Quartz64
    3
    0 Stimmen
    3 Beiträge
    501 Aufrufe
    FrankMF

    Es gibt Neuigkeiten!

    We are currently planning on making Quartz64 available next month. However, given the unpredictability of the manufacturing situation, please consider this a tentative time-frame. Once the production is underway, I’ll publish a dedicated post with additional information and an exact availability date.

    Although the hardware will soon see the light of day, the software is still not ready for primetime. Indeed, despite a truly monumental effort from various parties and lightning fast development progress, Quartz64 is still in early stages of development. This is understandable given how young the SoC is and how few Quartz64 (and other RK3566 boards) are currently available to developers. We will therefore target this initial production-run at developers and technically inclined enthusiasts able to help in the bring-up process. The soon-to-be scheduled batch will be large enough to cover all developers interested in picking up a unit (and then some), but end-users will specifically be asked to wait a little longer. After all, it is in everyone’s best interest that these early boards end up in the right hands at this early stage of development.

    Quelle: https://www.pine64.org/2021/05/15/may-update-connection-established/