Skip to content

Quartz64 - Modell A lieferbar

Verschoben Quartz64
  • Und seit heute kann man bestellen.

    Bildschirmfoto vom 2021-06-15 17-39-09.png

    Man kann die 4GB oder die 8GB-Version bestellen. Ich habe mich für die 4GB-Version entschieden.

    Hier noch was Wichtiges, Aus dem Pine64-Shop.

    IMPORTANT NOTICE

    The Quart64 SBC still in early development stage, only suitable for developers and advanced users wishing to contribute to early software development. Both mainline and Rockchip’s BSP fork of Linux have already been booted on the platform and development is proceeding quickly, but it will be
    months before end-users and industry partners can reliably deploy it. If you need a single board computer for a private or industrial application today, we encourage you to choose a different board from our existing lineup or wait a few months until Quartz64 software reaches a sufficient
    degree of maturity.

    Also, bitte nicht bestellen wenn ihr was braucht, das läuft. Dann bestellt besser den ROCKPro64 😉

    Quelle: https://pine64.com/product-category/quartz64/?v=0446c16e2e66

  • Ich hatte mich schon gewundert...

    We would like to inform you order XXXXXX will be shipped from China there is no VAT prepaid available. When we preparing Quart64 for listing, we missed to disable tax and added $13.80 VAT in the transaction. We will refund you the extra charge via Stripe back to your account in 1 week.

  • f915bf07-db01-4b8b-a82e-2919e25de47d-grafik.png

  • Durch den Zoll ist es auch...

    aa906c24-2e67-404d-aad2-69fe1832229b-grafik.png

  • FrankMF FrankM verschob dieses Thema von Quartz64 am
  • FrankMF FrankM verschob dieses Thema von Quartz64 - A am
  • [V] Quartz64B V1.3

    Frank's Resterampe quartz64 verkauf
    1
    1
    0 Stimmen
    1 Beiträge
    144 Aufrufe
    Niemand hat geantwortet
  • Quartz64 - Modell B - Stromverbrauch

    Quartz64 - B quartz64
    1
    2
    0 Stimmen
    1 Beiträge
    139 Aufrufe
    Niemand hat geantwortet
  • Quartz64 - Modell B - Was geht? (Peter Geis Image)

    Quartz64 - B quartz64
    1
    0 Stimmen
    1 Beiträge
    138 Aufrufe
    Niemand hat geantwortet
  • Quart64 - Modell B - Was geht? (Manjaro Image)

    Angeheftet Quartz64 - B quartz64
    1
    0 Stimmen
    1 Beiträge
    170 Aufrufe
    Niemand hat geantwortet
  • Quartz64 - Modell B - Peter Geis Entwicklungsumgebung

    Images quartz64
    2
    0 Stimmen
    2 Beiträge
    167 Aufrufe
    FrankMF
    Was geht? Funktion Status Bemerkung cpufreq ok *3 UART ja *5 LAN hat Fehler *1 USB3 ja ca. 210MB/s *2 PCIe ja ca. 296 MB/s, ist mit einer Lane angeschlossen *4 HDMI nein LAN *1 root@debian:~# iperf3 -c 192.168.3.213 Connecting to host 192.168.3.213, port 5201 [ 5] local 192.168.3.10 port 39124 connected to 192.168.3.213 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 434 KBytes 3.55 Mbits/sec 61 2.83 KBytes [ 5] 1.00-2.00 sec 475 KBytes 3.89 Mbits/sec 44 2.83 KBytes [ 5] 2.00-3.00 sec 396 KBytes 3.24 Mbits/sec 43 2.83 KBytes [ 5] 3.00-4.00 sec 318 KBytes 2.61 Mbits/sec 40 2.83 KBytes [ 5] 4.00-5.00 sec 315 KBytes 2.58 Mbits/sec 31 2.83 KBytes [ 5] 5.00-6.00 sec 396 KBytes 3.24 Mbits/sec 46 2.83 KBytes [ 5] 6.00-7.00 sec 396 KBytes 3.24 Mbits/sec 43 2.83 KBytes [ 5] 7.00-8.00 sec 396 KBytes 3.24 Mbits/sec 43 1.41 KBytes [ 5] 8.00-9.00 sec 396 KBytes 3.24 Mbits/sec 47 2.83 KBytes [ 5] 9.00-10.00 sec 317 KBytes 2.59 Mbits/sec 39 2.83 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 3.75 MBytes 3.14 Mbits/sec 437 sender [ 5] 0.00-10.00 sec 3.67 MBytes 3.08 Mbits/sec receiver iperf Done. root@debian:~# iperf3 -R -c 192.168.3.213 Connecting to host 192.168.3.213, port 5201 Reverse mode, remote host 192.168.3.213 is sending [ 5] local 192.168.3.10 port 39130 connected to 192.168.3.213 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 112 MBytes 941 Mbits/sec [ 5] 1.00-2.00 sec 112 MBytes 942 Mbits/sec [ 5] 2.00-3.00 sec 112 MBytes 942 Mbits/sec [ 5] 3.00-4.00 sec 112 MBytes 942 Mbits/sec [ 5] 4.00-5.00 sec 112 MBytes 942 Mbits/sec [ 5] 5.00-6.00 sec 112 MBytes 942 Mbits/sec [ 5] 6.00-7.00 sec 112 MBytes 942 Mbits/sec [ 5] 7.00-8.00 sec 112 MBytes 942 Mbits/sec [ 5] 8.00-9.00 sec 112 MBytes 942 Mbits/sec [ 5] 9.00-10.00 sec 112 MBytes 942 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.10 GBytes 943 Mbits/sec 370 sender [ 5] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec receiver iperf Done. USB3 *2 root@debian:~# lsusb Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. JMS578 SATA 6Gb/s Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Disk /dev/sda: 238.47 GiB, 256060514304 bytes, 500118192 sectors Disk model: Generic Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 05AB264B-738E-47BB-9F67-5C04CC24A736 Device Start End Sectors Size Type /dev/sda1 2048 500118158 500116111 238.5G Linux filesystem root@debian:~# mount /dev/sda1 /mnt/sda/ root@debian:~# cd /mnt/sda root@debian:/mnt/sda# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 81.5051 s, 211 MB/s -------------- root@debian:/# lsusb Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 003: ID 04e8:61f5 Samsung Electronics Co., Ltd Portable SSD T5 Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@debian:/mnt/sda# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 83.7618 s, 205 MB/s cpufreq *3 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_max_freq 1800000 1800000 1800000 1800000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1416000 1416000 1416000 1416000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1800000 1800000 1800000 1800000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1416000 1416000 1416000 1416000 PCIe NVMe SSD *4 root@debian:/mnt/nvme# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 58.0362 s, 296 MB/s Das soll laut Peter die maximal mögliche Geschwindigkeit der PCIe Schnittstelle sein. Diese Schnittstelle ist nur mit einer Lane an den Prozessor angeschlossen! UART Bitte drauf achten, diese Schnittstelle arbeitet mit Level Shifting, was billige Adapter oft nicht abkönnen. Habe ich hier im Beitrag ausführlich erklärt, mit passenden Adapter, wenn es so wie bei mir nicht funktionierte.
  • Quartz64 - dts File bearbeiten

    Angeheftet Verschoben Quartz64 quartz64 linux
    3
    0 Stimmen
    3 Beiträge
    353 Aufrufe
    FrankMF
    Ich weiß nicht, wonach ich gesucht habe, vermutlich nach apt install device-tree-compiler das gibt es im Manjaro Image nicht, es heißt ganz einfach dtc Also, ganz einfach mit pacman -S dtc installieren. Dann kann man sich diesen Umweg mit snapd sparen.
  • Manjaro Image - LAN Schnittstelle

    Verschoben Quartz64 quartz64 pine64
    3
    0 Stimmen
    3 Beiträge
    293 Aufrufe
    T
    @frankm and in 5.13.0-rc4-0.8 you have to do it again nice tips i got the board working
  • Pine64 Neuigkeiten Mai 2019

    ROCKPro64 pine64
    4
    2
    0 Stimmen
    4 Beiträge
    426 Aufrufe
    FrankMF
    [image: 1574014324777-f28a1ff9-0ea8-4b25-8aea-6bec3cd495f9-grafik.png]