Skip to content

Quartz64 - dts File bearbeiten

Angeheftet Verschoben Quartz64
3 1 387
  • ACHTUNG, nur was für erfahrene Nutzer. Beschädigungen der Hardware nicht ausgeschlossen!! Also, Hirn einschalten!!

    Was ist das dts File?

    Wenn ich das alles richtig verstanden habe, wird in diesem File das SBC hardwaremäßig definiert.

    Beispiel

            cpus {
                    #address-cells = <0x02>;
                    #size-cells = <0x00>;
    
                    cpu@0 {
                            device_type = "cpu";
                            compatible = "arm,cortex-a55";
                            reg = <0x00 0x00>;
                            clocks = <0x02 0x00>;
                            #cooling-cells = <0x02>;
                            enable-method = "psci";
                            operating-points-v2 = <0x03>;
                            cpu-supply = <0x04>;
                            phandle = <0x06>;
                    };
    
                    cpu@100 {
                            device_type = "cpu";
                            compatible = "arm,cortex-a55";
                            reg = <0x00 0x100>;
                            #cooling-cells = <0x02>;
                            enable-method = "psci";
                            operating-points-v2 = <0x03>;
                            cpu-supply = <0x04>;
                            phandle = <0x07>;
                    };
    
                    cpu@200 {
                            device_type = "cpu";
                            compatible = "arm,cortex-a55";
                            reg = <0x00 0x200>;
                            #cooling-cells = <0x02>;
                            enable-method = "psci";
                            operating-points-v2 = <0x03>;
                            cpu-supply = <0x04>;
                            phandle = <0x08>;
                    };
    
                    cpu@300 {
                            device_type = "cpu";
                            compatible = "arm,cortex-a55";
                            reg = <0x00 0x300>;
                            #cooling-cells = <0x02>;
                            enable-method = "psci";
                            operating-points-v2 = <0x03>;
                            cpu-supply = <0x04>;
                            phandle = <0x09>;
                    };
    

    Das File liegt bei der Benutzung des Manjaro Images unter /boot/dtbs/rockchip/ und hat folgenden Namen

    rk3566-quartz64-a.dtb
    

    oder

      rk3566-quartz64-b.dtb
    

    Ok, diese Files sind Binärfiles, das heißt wir können sie nicht einfach lesen, ändern und speichern. Dazu braucht man ein Tool mit dem Namen Device-Tree-Compiler - oder auch dtc

    Installiert man unter Manjaro mit

    pacman -S dtc
    

    Dann kopiert man sich das .dtb mal irgendwo hin, sicher ist sicher 😉

    cp /boot/dtbs/rockchip/rk3566-quartz64-b.dtb /root
    

    Nun wandeln wir das File in ein lesbares Format um.

    dtc -I dtb -O dts -o /root/testfile.dts /root/rk3566-quartz64-b.dtb
    
    • -I dtb - Input format
    • -O dts - Output format
    • -o - Output file
    • und am Ende das Sourcefile

    Für mich etwas seltsamer Aufbau, so das ich immer durcheinander komme. Für mich wäre Quelle -> Ziel logischer. Aber gut, so schreibe ich das mal wieder hier hin, damit ich es beim nächsten Mal nachlesen kann.

    Wir bekommen ein File mit dem Namen testfile.dts

    .dts steht für Source File
    .dtb steht für Binär File

    Dieses File ist ein ganz normales Textfile, was wir nun lesen, ändern und speichern können.

            pmu {
                    compatible = "arm,cortex-a55-pmu";
                    interrupts = <0x00 0xe4 0x04 0x00 0xe5 0x04 0x00 0xe6 0x04 0x00 0xe7 0x04>;
                    interrupt-affinity = <0x06 0x07 0x08 0x09>;
            };
    
            psci {
                    compatible = "arm,psci-1.0";
                    method = "smc";
            };
    
            timer {
                    compatible = "arm,armv8-timer";
                    interrupts = <0x01 0x0d 0x04 0x01 0x0e 0x04 0x01 0x0b 0x04 0x01 0x0a 0x04>;
                    arm,no-tick-in-suspend;
            };
    
            xin24m {
                    compatible = "fixed-clock";
                    clock-frequency = <0x16e3600>;
                    clock-output-names = "xin24m";
                    #clock-cells = <0x00>;
                    phandle = <0xa8>;
            };
    
            xin32k {
                    compatible = "fixed-clock";
                    clock-frequency = <0x8000>;
                    clock-output-names = "xin32k";
                    pinctrl-0 = <0x0a>;
                    pinctrl-names = "default";
                    #clock-cells = <0x00>;
                    phandle = <0xa9>;
            };
    
            sram@10f000 {
                    compatible = "mmio-sram";
                    reg = <0x00 0x10f000 0x00 0x100>;
                    #address-cells = <0x01>;
                    #size-cells = <0x01>;
                    ranges = <0x00 0x00 0x10f000 0x100>;
    
                    sram@0 {
                            compatible = "arm,scmi-shmem";
                            reg = <0x00 0x100>;
                            phandle = <0x05>;
                    };
            };
    
            sata@fc400000 {
                    compatible = "snps,dwc-ahci";
                    reg = <0x00 0xfc400000 0x00 0x1000>;
                    clocks = <0x0b 0x9b 0x0b 0x9c 0x0b 0x9d>;
                    clock-names = "sata\0pmalive\0rxoob";
                    interrupts = <0x00 0x5f 0x04>;
                    interrupt-names = "hostc";
                    phys = <0x0c 0x01>;
                    phy-names = "sata-phy";
                    ports-implemented = <0x01>;
                    power-domains = <0x0d 0x0f>;
                    status = "okay";
                    phandle = <0xaa>;
            };
    

    wird fortgesetzt....

  • Teil 2

    Wir wollen aus dem Souce-File wieder ein .dtb machen.

     dtc -I dts -O dtb -o /root/rk3566-quartz64-b.dtb /root/testfile.dts
    
    • -I dts - Input format
    • -O dtb - Output format
    • -o - Output file
    • und am Ende das Sourcefile

    Wir drehen die beiden Parameter -I und -O um und passen die Files an. Danach kommen ganz viele Warnungen, so was hier

    /root/testfile.dts:1119.3-56: Warning (clocks_property): /mmc@fe2b0000:clocks: cell 0 is not a phandle reference
    /root/testfile.dts:1119.3-56: Warning (clocks_property): /mmc@fe2b0000:clocks: cell 2 is not a phandle reference
    

    Aber, da fehlen mir die Kenntnisse um beurteilen zu können, ob das funktioniert.

    Zum Schluss kopiert man das fertig geändert .dtb wieder in den /boot Ordner.

    cp /root/rk3566-quartz64-b.dtb /boot/dtbs/rockchip/
    

    Das Bord neustarten und hoffen 🙂

  • Ich weiß nicht, wonach ich gesucht habe, vermutlich nach

    apt install device-tree-compiler
    

    das gibt es im Manjaro Image nicht, es heißt ganz einfach dtc 😎 Also, ganz einfach mit

    pacman -S dtc
    

    installieren. Dann kann man sich diesen Umweg mit snapd sparen.

  • FrankMF FrankM verschob dieses Thema von Quartz64 am
  • FrankMF FrankM verschob dieses Thema von Quartz64 - A am
  • FrankMF FrankM hat dieses Thema am angepinnt
  • Nextcloud - Update 31.0.5

    Nextcloud nextcloud linux
    1
    0 Stimmen
    1 Beiträge
    177 Aufrufe
    Niemand hat geantwortet
  • Redis - Datenbanken löschen

    Redis redis linux
    1
    0 Stimmen
    1 Beiträge
    279 Aufrufe
    Niemand hat geantwortet
  • FreeOTP+

    Linux linux freeotp+
    3
    1
    0 Stimmen
    3 Beiträge
    647 Aufrufe
    FrankMF
    Falls mal jemand von FreeOTP+ zum Bitwarden Authenticator wechseln möchte, ich habe da mal was gebaut https://forgejo.linux-nerds.org/frank/freeotpplus-export-to-bitwarden-authenticator
  • NanoPi R4S - OpenWrt kompilieren

    Angeheftet NanoPi R4S openwrt linux nanopir4s
    2
    2
    0 Stimmen
    2 Beiträge
    491 Aufrufe
    FrankMF
    Ja, ich kann bestätigen, es funktioniert und startet einwandfrei!
  • ROCKPro64 - PCIe SATA-Karte mit JMicron JMS585- Chip

    Angeheftet Hardware jms585 linux rockpro64
    13
    1
    1 Stimmen
    13 Beiträge
    2k Aufrufe
    FrankMF
    Ich möchte das dann hier zum Abschluss bringen, das NAS ist heute zusammengebaut worden. Hier zwei Fotos. [image: 1587814588721-img_20200425_102156_ergebnis.jpg] [image: 1587814595011-img_20200425_102206_ergebnis.jpg]
  • Debian 10 - Terminal wechseln

    Linux linux
    2
    0 Stimmen
    2 Beiträge
    708 Aufrufe
    FrankMF
    Das eigentliche Problem scheint zu sein, das bei der Installation folgendes fehlte. root@debian:~# apt install gnome-terminal Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Die folgenden zusätzlichen Pakete werden installiert: gnome-terminal-data nautilus-extension-gnome-terminal Die folgenden NEUEN Pakete werden installiert: gnome-terminal gnome-terminal-data nautilus-extension-gnome-terminal 0 aktualisiert, 3 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 2.867 kB an Archiven heruntergeladen werden. Nach dieser Operation werden 9.971 kB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] Nach der Deinstallation von tilix ist jetzt alles wieder so, wie ich es gewohnt bin
  • Restic - Rootserver als Datenablage nutzen

    Restic linux restic
    2
    0 Stimmen
    2 Beiträge
    803 Aufrufe
    FrankMF
    Ok, das erste Backup dauert immer was länger In meinem Fall 5 Std. 16 Minuten. Files: 33408 new, 0 changed, 0 unmodified Dirs: 1 new, 0 changed, 0 unmodified Data Blobs: 20849 new Tree Blobs: 2 new Added to the repo: 6.278 GiB processed 33408 files, 8.604 GiB in 5:16:03 snapshot 5beg1cb3 saved Aber, das Schöne ist, das die Backups inkrementell angelegt werden. Das nächste geht schneller open repository repository 3gg202a2 opened successfully, password is correct lock repository load index files using parent snapshot 5beg1cb3 start scan on [/home/frank] start backup on [/home/frank] scan finished in 3.791s: 33788 files, 8.611 GiB Files: 496 new, 74 changed, 33218 unmodified Dirs: 0 new, 1 changed, 0 unmodified Data Blobs: 292 new Tree Blobs: 2 new Added to the repo: 43.661 MiB processed 33788 files, 8.611 GiB in 2:15 snapshot fag41bf7 saved Eine tägliche Sicherung sollte dann wohl reichen.
  • NodeBB - Update

    NodeBB nodebb linux
    1
    0 Stimmen
    1 Beiträge
    710 Aufrufe
    Niemand hat geantwortet