bionic-minimal-rockpro64

[FrankM]

INFO'S

• Image Name: bionic-minimal-rockpro64
• Inhalt: Ubuntu 18.04 mit Minimalausstattung
• Downloadlink: https://github.com/ayufan-rock64/linux-build/releases
• Autor: Ayufan

ANWENDUNG

Das Image auf eine SD-Karte schreiben, den ROCKPro64 damit starten.

Status

Bootet
SSH Login ok
keine weiße LED
kein USB

Welcome to Ubuntu 18.04 LTS (GNU/Linux 4.4.126-rockchip-ayufan-228 aarch64)
                _                     __   _  _   
 _ __ ___   ___| | ___ __  _ __ ___  / /_ | || |  
| '__/ _ \ / __| |/ / '_ \| '__/ _ \| '_ \| || |_ 
| | | (_) | (__|   <| |_) | | | (_) | (_) |__   _|
|_|  \___/ \___|_|\_\ .__/|_|  \___/ \___/   |_|  
                    |_|                           

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage

  System information as of Wed May 23 06:28:17 UTC 2018

  System load:  0.36              Processes:           157
  Usage of /:   8.1% of 14.31GB   Users logged in:     0
  Memory usage: 2%                IP address for eth0: 192.168.3.4
  Swap usage:   0%

The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

---

lscpu

Architecture:        aarch64
Byte Order:          Little Endian
CPU(s):              6
On-line CPU(s) list: 0-5
Thread(s) per core:  1
Core(s) per socket:  3
Socket(s):           2
Vendor ID:           ARM
Model:               4
Model name:          Cortex-A53
Stepping:            r0p4
CPU max MHz:         1800.0000
CPU min MHz:         408.0000
BogoMIPS:            48.00
Flags:               fp asimd evtstrm aes pmull sha1 sha2 crc32

---

cat /proc/cpuinfo

processor	: 0
BogoMIPS	: 48.00
Features	: fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer	: 0x41
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 1
BogoMIPS	: 48.00
Features	: fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer	: 0x41
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 2
BogoMIPS	: 48.00
Features	: fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer	: 0x41
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 3
BogoMIPS	: 48.00
Features	: fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer	: 0x41
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 4
BogoMIPS	: 48.00
Features	: fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer	: 0x41
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0xd08
CPU revision	: 2

processor	: 5
BogoMIPS	: 48.00
Features	: fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer	: 0x41
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0xd08
CPU revision	: 2

Serial		: b180dcxxxxxxx

---

iperf3

iperf3 -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.3.4, port 50200
[  5] local 192.168.3.213 port 5201 connected to 192.168.3.4 port 50202
[ ID] Interval           Transfer     Bandwidth
[  5]   0.00-1.00   sec  60.8 KBytes   498 Kbits/sec                  
[  5]   1.00-2.00   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   2.00-3.00   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   3.00-4.00   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   4.00-5.00   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   5.00-6.00   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   6.00-7.00   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   7.00-8.00   sec   232 KBytes  1.90 Mbits/sec                  
[  5]   8.00-9.00   sec   346 KBytes  2.84 Mbits/sec                  
[  5]   9.00-10.00  sec   444 KBytes  3.64 Mbits/sec                  
[  5]  10.00-10.04  sec  22.6 KBytes  4.77 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  5]   0.00-10.04  sec  2.34 MBytes  1.96 Mbits/sec    6             sender
[  5]   0.00-10.04  sec  1.08 MBytes   902 Kbits/sec                  receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
iperf3: error - unable to receive parameters from client: Resource temporarily unavailable

-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.3.4, port 50206
[  5] local 192.168.3.213 port 5201 connected to 192.168.3.4 port 50208
[ ID] Interval           Transfer     Bandwidth
[  5]   0.00-1.00   sec   108 MBytes   905 Mbits/sec                  
[  5]   1.00-2.00   sec   112 MBytes   941 Mbits/sec                  
[  5]   2.00-3.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   3.00-4.00   sec   112 MBytes   941 Mbits/sec                  
[  5]   4.00-5.00   sec   112 MBytes   941 Mbits/sec                  
[  5]   5.00-6.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   6.00-7.00   sec   112 MBytes   938 Mbits/sec                  
[  5]   7.00-8.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   8.00-9.00   sec   112 MBytes   941 Mbits/sec                  
[  5]   9.00-10.00  sec   112 MBytes   941 Mbits/sec                  
[  5]  10.00-10.04  sec  4.49 MBytes   941 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  5]   0.00-10.04  sec  1.10 GBytes   941 Mbits/sec  340             sender
[  5]   0.00-10.04  sec  1.10 GBytes   937 Mbits/sec                  receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------

---

fdisk -l

Disk /dev/ram0: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mmcblk0: 14.7 GiB, 15811477504 bytes, 30881792 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: E55EA076-C740-42B9-A619-20BF1A4DE0E1

Device          Start      End  Sectors  Size Type
/dev/mmcblk0p1     64     8063     8000  3.9M Linux filesystem
/dev/mmcblk0p2   8064     8191      128   64K Linux filesystem
/dev/mmcblk0p3   8192    16383     8192    4M Linux filesystem
/dev/mmcblk0p4  16384    24575     8192    4M Linux filesystem
/dev/mmcblk0p5  24576    32767     8192    4M Linux filesystem
/dev/mmcblk0p6  32768   262143   229376  112M Microsoft basic data
/dev/mmcblk0p7 262144 30881758 30619615 14.6G Linux filesystem

---

Hier noch wie die Partitionstabelle aussieht

sudo sgdisk -p /dev/mmcblk0  
Disk /dev/mmcblk0: 30881792 sectors, 14.7 GiB
Sector size (logical/physical): 512/512 bytes
Disk identifier (GUID): E55EA076-C740-42B9-A619-20BF1A4DE0E1
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 30881758
Partitions will be aligned on 64-sector boundaries
Total free space is 30 sectors (15.0 KiB)

Number  Start (sector)    End (sector)  Size       Code  Name
   1              64            8063   3.9 MiB     8300  loader1
   2            8064            8191   64.0 KiB    8300  reserved1
   3            8192           16383   4.0 MiB     8300  reserved2
   4           16384           24575   4.0 MiB     8300  loader2
   5           24576           32767   4.0 MiB     8300  atf
   6           32768          262143   112.0 MiB   0700  boot
   7          262144        30881758   14.6 GiB    8300  root

---

nmap

nmap  192.168.3.4

Starting Nmap 7.01 ( https://nmap.org ) at 2018-05-23 16:47 CEST
Nmap scan report for rockpro64.localdomain (192.168.3.4)
Host is up (0.00060s latency).
Not shown: 999 closed ports
PORT   STATE SERVICE
22/tcp open  ssh

Nmap done: 1 IP address (1 host up) scanned in 2.34 seconds

So soll es sein, nur SSH offen.

[FrankM]

Neue Version 0.7.2

rock64@rockpro64:~$ iperf3 -c 192.168.3.213
Connecting to host 192.168.3.213, port 5201
[  4] local 192.168.3.6 port 50018 connected to 192.168.3.213 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-1.00   sec   116 MBytes   971 Mbits/sec    0    964 KBytes       
[  4]   1.00-2.00   sec   112 MBytes   942 Mbits/sec    0    964 KBytes       
[  4]   2.00-3.00   sec   112 MBytes   941 Mbits/sec    0   1.01 MBytes       
[  4]   3.00-4.00   sec   112 MBytes   941 Mbits/sec    0   1.01 MBytes       
[  4]   4.00-5.00   sec   112 MBytes   942 Mbits/sec    0   1.01 MBytes       
[  4]   5.00-6.00   sec   112 MBytes   942 Mbits/sec    0   1.01 MBytes       
[  4]   6.00-7.00   sec   112 MBytes   942 Mbits/sec    0   1.01 MBytes       
[  4]   7.00-8.00   sec   112 MBytes   941 Mbits/sec    0   1.01 MBytes       
[  4]   8.00-9.00   sec   112 MBytes   941 Mbits/sec    0   1.01 MBytes       
[  4]   9.00-10.00  sec   112 MBytes   942 Mbits/sec    0   1.01 MBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec  1.10 GBytes   944 Mbits/sec    0             sender
[  4]   0.00-10.00  sec  1.10 GBytes   941 Mbits/sec                  receiver

iperf Done.
rock64@rockpro64:~$ iperf -s
-bash: iperf: command not found
rock64@rockpro64:~$ iperf3 -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.3.213, port 37336
[  5] local 192.168.3.6 port 5201 connected to 192.168.3.213 port 37338
[ ID] Interval           Transfer     Bandwidth
[  5]   0.00-1.00   sec   110 MBytes   919 Mbits/sec                  
[  5]   1.00-2.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   2.00-3.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   3.00-4.00   sec   112 MBytes   941 Mbits/sec                  
[  5]   4.00-5.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   5.00-6.00   sec   112 MBytes   941 Mbits/sec                  
[  5]   6.00-7.00   sec   112 MBytes   942 Mbits/sec                  
[  5]   7.00-8.00   sec   112 MBytes   941 Mbits/sec                  
[  5]   8.00-9.00   sec   112 MBytes   941 Mbits/sec                  
[  5]   9.00-10.00  sec   112 MBytes   941 Mbits/sec                  
[  5]  10.00-10.01  sec  1.43 MBytes   930 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  5]   0.00-10.01  sec  0.00 Bytes  0.00 bits/sec                  sender
[  5]   0.00-10.01  sec  1.09 GBytes   939 Mbits/sec                  receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
^Ciperf3: interrupt - the server has terminated
rock64@rockpro64:~$ wget http://releases.ubuntu.com/18.04/ubuntu-18.04-desktop-amd64.iso
--2018-05-23 17:05:50--  http://releases.ubuntu.com/18.04/ubuntu-18.04-desktop-amd64.iso
Resolving releases.ubuntu.com (releases.ubuntu.com)... 91.189.88.23, 2001:7b8:3:37::21:3
Connecting to releases.ubuntu.com (releases.ubuntu.com)|91.189.88.23|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1921843200 (1.8G) [application/x-iso9660-image]
Saving to: 'ubuntu-18.04-desktop-amd64.iso'

ubuntu-18.04-desktop-amd64.iso  100%[=======================================================>]   1.79G  7.47MB/s    in 5m 38s  

2018-05-23 17:11:28 (5.43 MB/s) - 'ubuntu-18.04-desktop-amd64.iso' saved [1921843200/1921843200]

rock64@rockpro64:~$ 

Leider funktioniert UART2 bei mir noch nicht Dafür scheint das LAN jetzt fehlerfrei zu funktionieren.

[FrankM]

Kleiner Stresstest mit 7zip

rock64@rockpro64:~$ 7zr b

7-Zip (a) [64] 16.02 : Copyright (c) 1999-2016 Igor Pavlov : 2016-05-21
p7zip Version 16.02 (locale=C,Utf16=off,HugeFiles=on,64 bits,6 CPUs LE)

LE
CPU Freq:  1094   827  1077  1427  1782  1793  1793  1793  1793

RAM size:    3876 MB,  # CPU hardware threads:   6
RAM usage:   1323 MB,  # Benchmark threads:      6

                       Compressing  |                  Decompressing
Dict     Speed Usage    R/U Rating  |      Speed Usage    R/U Rating
         KiB/s     %   MIPS   MIPS  |      KiB/s     %   MIPS   MIPS

22:       4541   526    840   4418  |      92769   523   1512   7911
23:       4248   508    852   4329  |      90975   524   1501   7872
24:       4292   536    861   4615  |      88870   526   1484   7800
25:       4096   548    853   4677  |      85853   524   1457   7641
----------------------------------  | ------------------------------
Avr:             529    852   4510  |              524   1489   7806
Tot:             527   1170   6158

[FrankM]

Neue Version 0.7.3

Soll gefixt sein.

• USB2/3
• PCIe
• LED's

LED's

Weiße LED starten nach dem Booten dauerhaft OK

PCIe

Treiber soll drin sein, aber die 3,3V werden nicht zur Karte durchgeschaltet. Somit funktioniert PCIe nicht.
Nicht OK

USB2

USB-Funkadapter wird erkannt

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 1113:3163 Medion AG 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Funktastur getestet OK

USB3

Angeschlossene SSD wird erkannt OK

Kurzer Speed-Test. Bitte dran denken, wir haben hier noch kein optimiertes Release, sondern einen ersten Gehversuch. Da sind noch ganz viele Dinge anzupassen, was sicherlich noch Wochen, wenn nicht Monate dauert! Also, die Messergebnisse mit der nötigen Vorsicht genießen. Und dran denken, wenn @tkaiser das Ding richtig untersucht, dann haben wir auch ordentliche Meßergebnisse!

Haupt-PC

2,5Zoll am USB3-Port

sudo dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
[sudo] Passwort für frank: 
4096+0 Datensätze ein
4096+0 Datensätze aus
4294967296 bytes (4,3 GB, 4,0 GiB) copied, 38,171 s, **113 MB/s**

ROCKPro64

Ich benutze eine SAN Disk 240GB SSD an einem Inateck USB 3.0 2,5 Zoll Adapter.

Info zum USB-Adapter

lsusb
Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge

2,5 Zoll SSD am USB2-Port

sudo dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 160.058 s, **26.8 MB/s**

2,5 Zoll SSD am USB3 Port

sudo dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 36.2588 s, **118 MB/s**

Der @tkaiser erreicht deutlich höhere Geschwindigkeiten. Bis zu 400 MB/s. Hier nachzulesen.

Wenn ich so einen iozone Test mache wie der Thomas, dann erreiche ich ähnliche Werte

sudo iozone -a -g 1000m -s 1000m -i 0 -i 1 -r 16384K
	Iozone: Performance Test of File I/O
	        Version $Revision: 3.429 $
		Compiled for 64 bit mode.
		Build: linux 

	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.

	Run began: Sat May 26 05:16:40 2018

	Auto Mode
	Using maximum file size of 1024000 kilobytes.
	File size set to 1024000 kB
	Record Size 16384 kB
	Command line used: iozone -a -g 1000m -s 1000m -i 0 -i 1 -r 16384K
	Output is in kBytes/sec
	Time Resolution = 0.000001 seconds.
	Processor cache size set to 1024 kBytes.
	Processor cache line size set to 32 bytes.
	File stride size set to 17 * record size.
                                                              random    random     bkwd    record    stride                                    
              kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
         1024000   16384   383912   348782  1515506  1659394                                                  

Da muss ich den Thomas nochmal was zu fragen. ??

UART2

Und zum Schluss ist mir noch aufgefallen, das die UART2 Schnittstelle jetzt funktioniert Ok, den Adapter, der morgen kommt, habe ich dann umsonst bestellt. LOL

OK