Skip to content

Quartz64 - Model B

Angeheftet Verschoben Quartz64 - B
  • Quartz64_model_b.png
    Bildquelle: https://www.pine64.org/quartz64b/

    5V-Stromversorgung!

    SoC and Memory Specification

    CPU Architecture

    • Quad-core ARM Cortex-A55@1.8GHz
    • AArch32 for full backwards compatibility with ARMv7
    • ARM Neon Advanced SIMD (single instruction, multiple data) support for accelerated media and signal processing computation
    • Includes VFP hardware to support single and double-precision operations
    • ARMv8 Cryptography Extensions
    • Integrated 32KB L1 instruction cache and 32KB L1 data cache per core
    • 512KB unified system L3 cache
    • TrustZone technology support

    Graphic Process Unit GPU Capability

    • Mali-G52 2EE Bifrost GPU@800MHz
    • 4x Multi-Sampling Anti-Aliasing (MSAA) with minimal performance drop
    • 128KB L2 Cache configurations
    • Supports OpenGL ES 1.1, 2.0, and 3.2
    • Supports Vulkan 1.0 and 1.1
    • Supports OpenCL 2.0 Full Profile
    • Supports 1600 Mpix/s fill rate when at 800MHz clock frequency
    • Supports 38.4 GLOP/s when at 800MHz clock frequency

    Neural Process Unit NPU Capability

    • Neural network acceleration engine with processing performance of up to 0.8 TOPS
    • Supports integer 8 and integer 16 convolution operations
    • Supports the following deep learning frameworks: TensorFlow, TF-lite, Pytorch, Caffe, ONNX, MXNet, Keras, Darknet

    System Memory

    • RAM Memory Variants: 2GB - 8GB LPDDR4.
    • SPI Flash: 128Mbit / 16MByte

    Network

    • 10/100/1000Mbps Ethernet
    • WiFi 802.11 b/g/n/ac with Bluetooth 5.0 (optional on model A, build in on model B)

    Storage

    • microSD - bootable, supports SDHC and SDXC, storage up to 2TB
    • USB - 2 ports on model B, 3 ports on model A USB 2.0 Host port, 1 USB 3.0 Host port
    • one native SATA 3.0 6Gb/s Port (only on model A, shared with USB 3.0 host port)
    • optional eMMC module from 16GB up to 128GB

    Expansion Ports

    • eDP - 4 lanes of 2.7Gbps, up to 2560x1600@60Hz (only on model A)
    • DSI - Display Serial Interface, 4 lanes MiPi, up to 1440P on model A, 2 lanes MiPi, up to 1080p on model B
    • CSI - CMOS Camera Interface, 4 lanes MiPi up to 8 mega pixel on model A, 2 lanes MiPi up to 5 mega pixel on model B
    • TP - Touch Panel Port, SPI with interrupt on model A
    • RTC - Real Time Clock Battery Connector
    • VBAT - Lithium Battery Connector with temperature sensor input on model A
    • Wifi/BT Module Header - SDIO 3.0 and UART on model A, build in Wifi/BT Module on model B
    • 2x20 pins "Pi2" GPIO Header on model B, 2x10 pins GPO header on model A
    • PCIe x4 open ended slot on model A, m.2 slot on model B, one Gen2 lane due to SoC constraints

    Quartz64 board Information, Schematics, and Certifications

    Quelle: https://wiki.pine64.org/wiki/Quartz64

  • Neuigkeiten zum WiFi-Modul, was auf dem Model B verbaut ist.

    <@tl_lim> The Quartz64 model B product version will comes with BL602 module instead of AP6255.

    Das macht nur 2,4 GHz 😞

    Dokumentation

  • FrankMF FrankM hat am auf dieses Thema verwiesen
  • FrankMF FrankM hat dieses Thema am angepinnt
  • Da mein Model B ja bestellt ist, bin ich gerade über einen Post gestolpert.

    <CounterPillow> "Model A" is the big form factor, "Model B" the small form factor. Model A boards generally use 12V, Model B boards use 5V.

    Da sollte man also höllisch aufpassen, wenn man beide auf dem Schreibtisch liegen hat. Da ist schnell mal ein B gegrillt, wenn man das falsche Netzteil erwischt.

    Blödsinn! Beim Quartz64 - Modell A ist der Stecker

    DC 12V @ 3A 5.5mmOD/2.1mmID center-positive Barrel DC Jack connector

    beim Quartz64 - Modell B

    DC 5V @ 3A 3.5mmOD/1.35mmID center-positive Barrel DC Jack connector

    Passt also nicht, also alles safe 🙂

    Der Schaltplan soll nächste Woche veröffentlicht werden.

    CounterPillow hat mal nachgemessen

    <CounterPillow> just checked with with multimeter, it is center positive

  • Da schreibt mich das Sales Team von pine64.org an teilt mir mit, das meine PLZ falsch ist. Ja, ein scheiß Tippfehler....... Er wäre schon da 😞

  • Das ging diesmal flott. Nachricht von FedEx, Lieferung soll bis zum 02.06 da sein 🤓

  • Er ist angekommen.

    20210625_163934.jpg

    1024-2272.jpg

    Leider funktioniert der UART Adapter nicht, jede Menge Artefakte 😞

    Ein paar Neue sind bestellt und hoffentlich morgen da. Das alte Spielkind, konnte es aber nicht lassen und musste unbedingt schauen ob der M2-Slot funktioniert.

    1024-227245.jpg

    Bildschirmfoto vom 2022-06-01 19-04-26.png

    Ok, das macht natürlich NULL Spaß, also geht es morgen weiter...

  • FrankMF FrankM verschob dieses Thema von Hardware am
  • Heute die Zollrechnung von FedEx 16,47€

  • [V] Quartz64B V1.3

    Frank's Resterampe
    1
    0 Stimmen
    1 Beiträge
    78 Aufrufe
    Niemand hat geantwortet
  • Quartz64 - Modell B - eMMC

    Quartz64 - B
    1
    0 Stimmen
    1 Beiträge
    134 Aufrufe
    Niemand hat geantwortet
  • Quartz64 - Modell B - Temperaturen

    Quartz64 - B
    1
    0 Stimmen
    1 Beiträge
    94 Aufrufe
    Niemand hat geantwortet
  • Qurtz64 - Modell B - GPIO

    Quartz64 - B
    1
    0 Stimmen
    1 Beiträge
    75 Aufrufe
    Niemand hat geantwortet
  • Quartz64 - Modell B - M.2 Anschluss

    Quartz64 - B
    3
    0 Stimmen
    3 Beiträge
    204 Aufrufe
    FrankMF

    Ich hatte schon drauf getippt, das der Slot nur mit einer Lane angeschlossen ist.

    <pgwipeout> It is a single lane pcie2 port.

    Und damit ist das das erwartete Ergebnis

    root@debian:/mnt/nvme# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 58.4993 s, 294 MB/s

    Das alles mit Debian 10, was man mit Peters Buildsystem installieren kann. Kann man aber auch bei Bedarf auf 11.3 hochziehen 🙂

    root@debian:/etc# uname -a Linux debian 5.17.0 #1 SMP PREEMPT Thu Apr 7 13:38:56 UTC 2022 aarch64 GNU/Linux root@debian:/etc# cat debian_version 11.3 root@debian:/etc#
  • Quartz64 - Modell B - UART

    Angeheftet Quartz64 - B
    4
    0 Stimmen
    4 Beiträge
    163 Aufrufe
    FrankMF

    Um das hier zu komplettieren, habe ich mich gerade gefragt "Wo speichert er die Settings?"

    Ok, ich habe sie gefunden.

    /root/.minirc.dfl

    Inhalt

    # Diese Datei ist maschinell erzeugt. Bitte verwenden Sie das # Einstellungs-Menü im minicom-Programm, um die Einstellungen # zu ändern. pu rtscts No

    Jetzt habe ich ausreichend hier dokumentiert, falls ich da nochmal Probleme mit habe.

  • Quartz64 - USB3 oder SATA?

    Verschoben Quartz64 - A
    5
    0 Stimmen
    5 Beiträge
    251 Aufrufe
    T

    Naja, es geht ja jetzt bei "Schnittstelle" um mechanische Konnektoren. Und sowohl mPCIe/mSATA als auch M.2 sehen die unterschiedlichsten Protokolle vor, darunter die populären USB, PCIe und eben SATA.

    Ich hab bspw. ein Clearfog Pro mit 2 mPCIe/mSATA-Slots, in dem man per u-boot simpel zwischen SATA und PCIe wechseln kann. Und wenn der M.2-Slot auf dem Quartz64 Model B tatsächlich Key B ist, dann bedeutet das, dass man jede – ggf. eh schon herumliegende – M.2-SATA-SSD reinstecken kann, wohingegen dann nur ein paar NVMe-SSDs passen (das Gros ist Key M only, nur paar kommen mit Key B/M).

    Hmm... eigentlich wäre Key M dann schlauer, denn M.2-SATA-SSDs sind alle Key B/M, und NVMe-SSDs entweder Key M oder auch B/M.

    Wie auch immer bzw. um den Bogen zu Deinem Quartz64 Model A zu spannen. Ein Billo-Adapter von Aliexpress (wie der hier) sollte reichen, um M.2-SATA-SSDs verwenden zu können (sowas kann wie schon geschrieben eh bereits rumliegen und zumindest sequenzielle Transferraten sind mit SATA einen Tuck schneller als NVMe mit der einen Gen2-Lane des RK3566)

  • Pine64 Neuigkeiten Mai 2019

    ROCKPro64
    4
    0 Stimmen
    4 Beiträge
    366 Aufrufe
    FrankMF

    f28a1ff9-0ea8-4b25-8aea-6bec3cd495f9-grafik.png