Ich möchte das dann hier zum Abschluss bringen, das NAS ist heute zusammengebaut worden. Hier zwei Fotos.
IMG_20200425_102156_ergebnis.jpg
IMG_20200425_102206_ergebnis.jpg
Mainline Kernel 4.20.x
-
Kamil hat endlich das Reboot Problem hinbekommen. Fettes Danke schön!! Nun kann man endlich einfach
sudo rebooteintippen und die Kiste lebt danach wieder
Im Moment wird auch die NVMe SSD korrekt eingebunden.System
rock64@rockpro64:/mnt$ uname -a Linux rockpro64 4.18.0-rc3-1037-ayufan-gb95494bd8d0f #1 SMP PREEMPT Tue Jul 3 20:00:21 UTC 2018 aarch64 aarch64 aarch64 GNU/Linuxiozone
rock64@rockpro64:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Iozone: Performance Test of File I/O Version $Revision: 3.429 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa. Run began: Wed Jul 4 14:33:19 2018 Include fsync in write timing O_DIRECT feature enabled Auto Mode File size set to 102400 kB Record Size 4 kB Record Size 16 kB Record Size 512 kB Record Size 1024 kB Record Size 16384 kB Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 54400 112108 122677 123147 48970 110305 102400 16 187878 333338 354818 358794 177519 330848 102400 512 950675 1041740 919524 941410 772637 1010119 102400 1024 985240 1039340 938399 961619 867759 1082360 102400 16384 693795 1359947 1338852 1388810 1376730 1356480 iozone test complete.iperf3
rock64@rockpro64:/mnt$ iperf3 -c 192.168.3.213 Connecting to host 192.168.3.213, port 5201 [ 4] local 192.168.3.3 port 43660 connected to 192.168.3.213 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 114 MBytes 956 Mbits/sec 0 335 KBytes [ 4] 1.00-2.00 sec 112 MBytes 943 Mbits/sec 11 288 KBytes [ 4] 2.00-3.00 sec 112 MBytes 941 Mbits/sec 11 320 KBytes [ 4] 3.00-4.00 sec 112 MBytes 941 Mbits/sec 0 349 KBytes [ 4] 4.00-5.00 sec 112 MBytes 942 Mbits/sec 11 315 KBytes [ 4] 5.00-6.00 sec 112 MBytes 941 Mbits/sec 11 308 KBytes [ 4] 6.00-7.00 sec 112 MBytes 942 Mbits/sec 11 322 KBytes [ 4] 7.00-8.00 sec 112 MBytes 941 Mbits/sec 10 315 KBytes [ 4] 8.00-9.00 sec 112 MBytes 941 Mbits/sec 10 338 KBytes [ 4] 9.00-10.00 sec 112 MBytes 941 Mbits/sec 21 334 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 1.10 GBytes 943 Mbits/sec 96 sender [ 4] 0.00-10.00 sec 1.10 GBytes 941 Mbits/sec receiver iperf Done. rock64@rockpro64:/mnt$ iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.3.213, port 40238 [ 5] local 192.168.3.3 port 5201 connected to 192.168.3.213 port 40240 [ ID] Interval Transfer Bandwidth [ 5] 0.00-1.00 sec 109 MBytes 913 Mbits/sec [ 5] 1.00-2.00 sec 112 MBytes 942 Mbits/sec [ 5] 2.00-3.00 sec 112 MBytes 941 Mbits/sec [ 5] 3.00-4.00 sec 112 MBytes 941 Mbits/sec [ 5] 4.00-5.00 sec 112 MBytes 941 Mbits/sec [ 5] 5.00-6.00 sec 112 MBytes 940 Mbits/sec [ 5] 6.00-7.00 sec 112 MBytes 941 Mbits/sec [ 5] 7.00-8.00 sec 112 MBytes 941 Mbits/sec [ 5] 8.00-9.00 sec 112 MBytes 941 Mbits/sec [ 5] 9.00-10.00 sec 112 MBytes 942 Mbits/sec [ 5] 10.00-10.03 sec 3.05 MBytes 939 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 5] 0.00-10.03 sec 0.00 Bytes 0.00 bits/sec sender [ 5] 0.00-10.03 sec 1.10 GBytes 938 Mbits/sec receiver ----------------------------------------------------------- Server listening on 5201 -----------------------------------------------------------USB3
SSD SanDisk SSD plus 250GB
rock64@rockpro64:/mnt$ sudo su root@rockpro64:/mnt# mount /dev/sda1 /media root@rockpro64:/mnt# cd /media root@rockpro64:/media# sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Iozone: Performance Test of File I/O Version $Revision: 3.429 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa. Run began: Wed Jul 4 14:41:21 2018 Include fsync in write timing O_DIRECT feature enabled Auto Mode File size set to 102400 kB Record Size 4 kB Record Size 16 kB Record Size 512 kB Record Size 1024 kB Record Size 16384 kB Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 25017 32476 45514 45759 17746 14057 102400 16 58424 97006 126970 129510 52868 51883 102400 512 276594 286436 260954 265792 261403 286173 102400 1024 301257 314764 282678 289621 279472 312712 102400 16384 307456 170212 193047 313594 380916 211619 iozone test complete.Reboot
Angeschlossen
- NVMe Karte mit Samsung 960 EVO m.2 256GB
- SSD SanDisk SSD plus 250GB
- UART2 Modul
- HDMI
- 5A-Netzteil
Reboot ohne Probleme. Mehrmals ohne Probleme getestet.
So langsam wird das eine geile Kiste LOL
-
4.18.0-rc3-1046-ayufan released
beinhaltet eine Änderung für den ROCKPro64, irgendwas mit der SD-Karte.
Mit dem Unterbau 0.7.7, das Beste was ich bis jetzt hier hatte. Bei jedem Booten kein Problem, jedes mal wird die NVMe-Karte erkannt. Juhu. Weiter testen......
Kleines Problem - der Power-Button hat keine Funktion. Lt. Kamil liegt das am fehlenden Suspend-Modul im Mainline. Issue
-
4.18.0-rc5-1048-ayufan released
- ayufan: dts: rockpro64: support sdr104 mode for sd-card
Dieses Release ist als Latest Release gekennzeichnet. Heißt, wir haben hier einen ausreichend stabilen Stand.
Auch hier gilt, Beiträge die ich mit
kennzeichne könnt Ihr installieren, diese sind ausreichend getestet. -
4.20.0-rc6-1075-ayufan released
Jede Menge Änderungen im dts File, die aber von Kamil noch nicht angepasst sind. Mein Testimage hier läuft mit PCIe NVMe SSD nicht. Also, noch abwarten!!
(19:26:49) FrankM: ayufan5: 4.20 without pcie ? nvm card don't recognized. with 4.4 no problem.
(19:31:02) ayufan5: FrankM: I did not yet fix dts -
4.20.0-1077-ayufan released
Änderungen sind mir zur Zeit noch nicht bekannt. Test steht noch aus.
PCIe NVMe Karte geht wieder.
Kernel
rock64@rockpro64:/mnt$ uname -a Linux rockpro64 4.20.0-1077-ayufan-gdeb16128b458 #ayufan SMP PREEMPT Sun Dec 30 12:00:17 UTC 2018 aarch64 aarch64 aarch64 GNU/Linuxiozone
rock64@rockpro64:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Iozone: Performance Test of File I/O Version $Revision: 3.429 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa. Run began: Sun Dec 30 13:50:15 2018 Include fsync in write timing O_DIRECT feature enabled Auto Mode File size set to 102400 kB Record Size 4 kB Record Size 16 kB Record Size 512 kB Record Size 1024 kB Record Size 16384 kB Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 105475 150901 165040 168152 55921 146649 102400 16 323077 419261 446377 452714 199703 418553 102400 512 1035241 1048622 962876 983026 776039 1044747 102400 1024 1066733 1024204 922389 946779 863405 1042164 102400 16384 942288 1384367 1395018 1457672 1446158 1372405 iozone test complete. -
4.20.0-1081-ayufan & 4.20.0-1083-ayufan released
1081 & 1083
mmc: core: Add MMC Command Queue Support kernel parameter
This parameter offers a workaround for cards that report command queue
(CMDQ) support but don't work correctly when CMDQ is enabled. At least
some ROCKPro64 + Foresee (32GB) eMMC card combinations have trouble
working correctly. Setting mmc_cmdqueue=off in kernel command line
disables CMDQ support and may help with troublesome hardware. -