Skip to content

Mainline Kernel 4.20.x

Verschoben Images
  • Kamil war mal endlich wieder fleißig 🙂 Als ich heute nach Hause kam, gab es 4.18.0-rc3-1031-ayufan. Das erste 4.18er Release von Kamil. Installiert, getestet und PCIe funktioniert nicht mehr. Schnell mal geschaut ob Kamil anwesend ist und eine knappe Stunde später hat er das Problem gefixt.

    4.18.0-rc3-1033-ayufan

    • LAN Speed 937 Mbits/sec // 941 Mbits/sec
    • USB3 erkennt meine SSD
    • bootet ohne Probleme mit eingesteckter USB3-Platte, vorher hielt der Bootvorgang immer an.

    An USB3 erhalte ich folgendes

    rock64@rockpro64:/media$ sudo dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
    4096+0 records in
    4096+0 records out
    4294967296 bytes (4,3 GB, 4,0 GiB) copied, 33,5913 s, 128 MB/s
    

    An meiner PCIe-Platte

    rock64@rockpro64:/mnt$ sudo dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
    4096+0 records in
    4096+0 records out
    4294967296 bytes (4,3 GB, 4,0 GiB) copied, 17,3187 s, 248 MB/s
    

    Das war schon mal schneller, oder!? Kontrolle mit iozone

     rock64@rockpro64:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 
     [sudo] password for rock64: 
     	Iozone: Performance Test of File I/O
     	        Version $Revision: 3.429 $
     		Compiled for 64 bit mode.
     		Build: linux 
     
     	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
     	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
     	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
     	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
     	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
     	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
     	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
     	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
     
     	Run began: Tue Jul  3 18:12:06 2018
     
     	Include fsync in write timing
     	O_DIRECT feature enabled
     	Auto Mode
     	File size set to 102400 kB
     	Record Size 4 kB
     	Record Size 16 kB
     	Record Size 512 kB
     	Record Size 1024 kB
     	Record Size 16384 kB
     	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
     	Output is in kBytes/sec
     	Time Resolution = 0.000001 seconds.
     	Processor cache size set to 1024 kBytes.
     	Processor cache line size set to 32 bytes.
     	File stride size set to 17 * record size.
                                                                   random    random     bkwd    record    stride                                    
                   kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
               102400       4    49083   105362   114910   115946    49053   103581                                                          
               102400      16   169898   277387   296134   298721   163070   274770                                                          
               102400     512   588242   636139   608484   617745   556516   633581                                                          
               102400    1024   619948   650514   617928   627797   595345   649651                                                          
               102400   16384   508885   755782   766938   782370   779863   754333                                                          
     
     iozone test complete.
    
  • Noch ein kurzer Test meiner SSD mit iozone am USB3 und am USB2-Anschluß

    System

    rock64@rockpro64:/media$ uname -a
    Linux rockpro64 4.18.0-rc3-1033-ayufan-gd258212d8c0f #1 SMP PREEMPT Tue Jul 3 15:27:29 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux
    

    USB3

    rock64@rockpro64:/media$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 
    	Iozone: Performance Test of File I/O
    	        Version $Revision: 3.429 $
    		Compiled for 64 bit mode.
    		Build: linux 
    
    	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
    	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
    	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
    	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
    	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
    	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
    	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
    	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
    
    	Run began: Tue Jul  3 21:04:07 2018
    
    	Include fsync in write timing
    	O_DIRECT feature enabled
    	Auto Mode
    	File size set to 102400 kB
    	Record Size 4 kB
    	Record Size 16 kB
    	Record Size 512 kB
    	Record Size 1024 kB
    	Record Size 16384 kB
    	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Output is in kBytes/sec
    	Time Resolution = 0.000001 seconds.
    	Processor cache size set to 1024 kBytes.
    	Processor cache line size set to 32 bytes.
    	File stride size set to 17 * record size.
                                                                  random    random     bkwd    record    stride                                    
                  kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
              102400       4    23225    23688    30236    43705    17631    11938                                                          
              102400      16    60901    48038   120371   121827    40316    38099                                                          
              102400     512   260355   264172   234637   237762   234796   279171                                                          
              102400    1024   262514   183559   129129   269448   267381   289946                                                          
              102400   16384   128452   312479   301304   311866   360612   323572                                                          
    
    iozone test complete.
    

    USB2

    rock64@rockpro64:/media$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 
    	Iozone: Performance Test of File I/O
    	        Version $Revision: 3.429 $
    		Compiled for 64 bit mode.
    		Build: linux 
    
    	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
    	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
    	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
    	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
    	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
    	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
    	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
    	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
    
    	Run began: Tue Jul  3 21:08:37 2018
    
    	Include fsync in write timing
    	O_DIRECT feature enabled
    	Auto Mode
    	File size set to 102400 kB
    	Record Size 4 kB
    	Record Size 16 kB
    	Record Size 512 kB
    	Record Size 1024 kB
    	Record Size 16384 kB
    	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Output is in kBytes/sec
    	Time Resolution = 0.000001 seconds.
    	Processor cache size set to 1024 kBytes.
    	Processor cache line size set to 32 bytes.
    	File stride size set to 17 * record size.
                                                                  random    random     bkwd    record    stride                                    
                  kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
              102400       4     7923     7446    10083    10662     6661     7399                                                          
              102400      16    17989    18746    23508    23140    17249    23853                                                          
              102400     512    33339    33195    33530    33648    33301    33476                                                          
              102400    1024    33750    30821    32604    34825    34629    33741                                                          
              102400   16384    33651    34174    35672    35858    35787    34147
    
  • Kamil hat endlich das Reboot Problem hinbekommen. Fettes Danke schön!! Nun kann man endlich einfach

    sudo reboot
    

    eintippen und die Kiste lebt danach wieder 🙂 Im Moment wird auch die NVMe SSD korrekt eingebunden.

    System

    rock64@rockpro64:/mnt$ uname -a
    Linux rockpro64 4.18.0-rc3-1037-ayufan-gb95494bd8d0f #1 SMP PREEMPT Tue Jul 3 20:00:21 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux
    

    iozone

    rock64@rockpro64:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 
    	Iozone: Performance Test of File I/O
    	        Version $Revision: 3.429 $
    		Compiled for 64 bit mode.
    		Build: linux 
    
    	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
    	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
    	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
    	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
    	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
    	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
    	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
    	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
    
    	Run began: Wed Jul  4 14:33:19 2018
    
    	Include fsync in write timing
    	O_DIRECT feature enabled
    	Auto Mode
    	File size set to 102400 kB
    	Record Size 4 kB
    	Record Size 16 kB
    	Record Size 512 kB
    	Record Size 1024 kB
    	Record Size 16384 kB
    	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Output is in kBytes/sec
    	Time Resolution = 0.000001 seconds.
    	Processor cache size set to 1024 kBytes.
    	Processor cache line size set to 32 bytes.
    	File stride size set to 17 * record size.
                                                                  random    random     bkwd    record    stride                                    
                  kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
              102400       4    54400   112108   122677   123147    48970   110305                                                          
              102400      16   187878   333338   354818   358794   177519   330848                                                          
              102400     512   950675  1041740   919524   941410   772637  1010119                                                          
              102400    1024   985240  1039340   938399   961619   867759  1082360                                                          
              102400   16384   693795  1359947  1338852  1388810  1376730  1356480                                                          
    
    iozone test complete.
    

    iperf3

    rock64@rockpro64:/mnt$ iperf3 -c 192.168.3.213
    Connecting to host 192.168.3.213, port 5201
    [  4] local 192.168.3.3 port 43660 connected to 192.168.3.213 port 5201
    [ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
    [  4]   0.00-1.00   sec   114 MBytes   956 Mbits/sec    0    335 KBytes       
    [  4]   1.00-2.00   sec   112 MBytes   943 Mbits/sec   11    288 KBytes       
    [  4]   2.00-3.00   sec   112 MBytes   941 Mbits/sec   11    320 KBytes       
    [  4]   3.00-4.00   sec   112 MBytes   941 Mbits/sec    0    349 KBytes       
    [  4]   4.00-5.00   sec   112 MBytes   942 Mbits/sec   11    315 KBytes       
    [  4]   5.00-6.00   sec   112 MBytes   941 Mbits/sec   11    308 KBytes       
    [  4]   6.00-7.00   sec   112 MBytes   942 Mbits/sec   11    322 KBytes       
    [  4]   7.00-8.00   sec   112 MBytes   941 Mbits/sec   10    315 KBytes       
    [  4]   8.00-9.00   sec   112 MBytes   941 Mbits/sec   10    338 KBytes       
    [  4]   9.00-10.00  sec   112 MBytes   941 Mbits/sec   21    334 KBytes       
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bandwidth       Retr
    [  4]   0.00-10.00  sec  1.10 GBytes   943 Mbits/sec   96             sender
    [  4]   0.00-10.00  sec  1.10 GBytes   941 Mbits/sec                  receiver
    
    iperf Done.
    rock64@rockpro64:/mnt$ iperf3 -s
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------
    Accepted connection from 192.168.3.213, port 40238
    [  5] local 192.168.3.3 port 5201 connected to 192.168.3.213 port 40240
    [ ID] Interval           Transfer     Bandwidth
    [  5]   0.00-1.00   sec   109 MBytes   913 Mbits/sec                  
    [  5]   1.00-2.00   sec   112 MBytes   942 Mbits/sec                  
    [  5]   2.00-3.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   3.00-4.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   4.00-5.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   5.00-6.00   sec   112 MBytes   940 Mbits/sec                  
    [  5]   6.00-7.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   7.00-8.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   8.00-9.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   9.00-10.00  sec   112 MBytes   942 Mbits/sec                  
    [  5]  10.00-10.03  sec  3.05 MBytes   939 Mbits/sec                  
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bandwidth
    [  5]   0.00-10.03  sec  0.00 Bytes  0.00 bits/sec                  sender
    [  5]   0.00-10.03  sec  1.10 GBytes   938 Mbits/sec                  receiver
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------
    

    USB3

    SSD SanDisk SSD plus 250GB

    rock64@rockpro64:/mnt$ sudo su
    root@rockpro64:/mnt# mount /dev/sda1 /media
    root@rockpro64:/mnt# cd /media
    root@rockpro64:/media# sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 
    	Iozone: Performance Test of File I/O
    	        Version $Revision: 3.429 $
    		Compiled for 64 bit mode.
    		Build: linux 
    
    	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
    	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
    	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
    	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
    	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
    	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
    	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
    	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
    
    	Run began: Wed Jul  4 14:41:21 2018
    
    	Include fsync in write timing
    	O_DIRECT feature enabled
    	Auto Mode
    	File size set to 102400 kB
    	Record Size 4 kB
    	Record Size 16 kB
    	Record Size 512 kB
    	Record Size 1024 kB
    	Record Size 16384 kB
    	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Output is in kBytes/sec
    	Time Resolution = 0.000001 seconds.
    	Processor cache size set to 1024 kBytes.
    	Processor cache line size set to 32 bytes.
    	File stride size set to 17 * record size.
                                                                  random    random     bkwd    record    stride                                    
                  kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
              102400       4    25017    32476    45514    45759    17746    14057                                                          
              102400      16    58424    97006   126970   129510    52868    51883                                                          
              102400     512   276594   286436   260954   265792   261403   286173                                                          
              102400    1024   301257   314764   282678   289621   279472   312712                                                          
              102400   16384   307456   170212   193047   313594   380916   211619                                                          
    
    iozone test complete.
    

    Reboot

    Angeschlossen

    • NVMe Karte mit Samsung 960 EVO m.2 256GB
    • SSD SanDisk SSD plus 250GB
    • UART2 Modul
    • HDMI
    • 5A-Netzteil

    Reboot ohne Probleme. Mehrmals ohne Probleme getestet.

    So langsam wird das eine geile Kiste LOL

  • 4.18.0-rc3-1044-ayufan released

    beinhaltet nur eine Änderung für den Rock64, also für uns nicht interessant.

  • 4.18.0-rc3-1046-ayufan released

    beinhaltet eine Änderung für den ROCKPro64, irgendwas mit der SD-Karte.

    Mit dem Unterbau 0.7.7, das Beste was ich bis jetzt hier hatte. Bei jedem Booten kein Problem, jedes mal wird die NVMe-Karte erkannt. Juhu. Weiter testen......

    Kleines Problem - der Power-Button hat keine Funktion. Lt. Kamil liegt das am fehlenden Suspend-Modul im Mainline. Issue

  • 4.18.0-rc5-1048-ayufan released ✌

    • ayufan: dts: rockpro64: support sdr104 mode for sd-card

    Dieses Release ist als Latest Release gekennzeichnet. Heißt, wir haben hier einen ausreichend stabilen Stand.

    Auch hier gilt, Beiträge die ich mit ✌ kennzeichne könnt Ihr installieren, diese sind ausreichend getestet.

  • 4.18.0-rc3-1050-ayufan released ✌

    Ich kann nicht erkennen, was Kamil hier geändert hat!? 1048 ist nicht mehr Latest Release, dafür die 1050 jetzt.

  • 4.18.0-rc5-1052-ayufan released

    • defconfig: enable PWM FAN

    Damit sollte der Lüfter funktionieren.

  • 4.18.0-rc8-1054-ayufan released

    • dts: rockpro64: run spi-flash with 10MHz

    Kamil meinte dazu

    06/08/18 20:38
    <ayufan1> ugh, spi flash is working 🙂
    06/08/18 20:38
    <ayufan1> on rockpro64

  • 4.18.0-rc8-1056-ayufan released

    • external: defconfig: Add support for f2fs and crc32 (#6)
  • 4.18.0-rc8-1060-ayufan released

    • dev.mk: send only files of that kernel version
  • Nach zwei Monaten ein Zeichen 🙂

    4.19.0-rc4-1063-ayufan released

  • 4.19.0-rc4-1065-ayufan released ✌

    • ayufan: defconfig: support tehuti 10gbps adapter

    Ok, 10gbps Netzwerkadapter läuft beim Kamil. 👏

  • 4.19.0-rc4-1067-ayufan released

    • ayufan: dts: rockpro64: disable tx checksumming for gmac
  • 4.19.0-rc4-1069-ayufan released

    • ayufan: rockpro64: fix emmc boot: Revert "mmc: sdhci-of-arasan: Add CQHCI…
  • 4.19.0-rc4-1071-ayufan released

    • rockchip: pcie: limit bus number to 31 inclusive
  • 4.19.0-1073-ayufan released

    Liste der Änderungen nicht gefunden. Es sind ein paar Dinge wohl geändert worden. Kann man hier nachlesen.

  • 4.20.0-rc6-1075-ayufan released

    Jede Menge Änderungen im dts File, die aber von Kamil noch nicht angepasst sind. Mein Testimage hier läuft mit PCIe NVMe SSD nicht. Also, noch abwarten!!

    (19:26:49) FrankM: ayufan5: 4.20 without pcie ? nvm card don't recognized. with 4.4 no problem.
    (19:31:02) ayufan5: FrankM: I did not yet fix dts 🙂

  • 4.20.0-1077-ayufan released

    Änderungen sind mir zur Zeit noch nicht bekannt. Test steht noch aus.

    PCIe NVMe Karte geht wieder.

    Kernel

    rock64@rockpro64:/mnt$ uname -a
    Linux rockpro64 4.20.0-1077-ayufan-gdeb16128b458 #ayufan SMP PREEMPT Sun Dec 30 12:00:17 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux
    

    iozone

    rock64@rockpro64:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 
    	Iozone: Performance Test of File I/O
    	        Version $Revision: 3.429 $
    		Compiled for 64 bit mode.
    		Build: linux 
    
    	Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
    	             Al Slater, Scott Rhine, Mike Wisner, Ken Goss
    	             Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
    	             Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
    	             Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
    	             Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
    	             Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
    	             Vangel Bojaxhi, Ben England, Vikentsi Lapa.
    
    	Run began: Sun Dec 30 13:50:15 2018
    
    	Include fsync in write timing
    	O_DIRECT feature enabled
    	Auto Mode
    	File size set to 102400 kB
    	Record Size 4 kB
    	Record Size 16 kB
    	Record Size 512 kB
    	Record Size 1024 kB
    	Record Size 16384 kB
    	Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
    	Output is in kBytes/sec
    	Time Resolution = 0.000001 seconds.
    	Processor cache size set to 1024 kBytes.
    	Processor cache line size set to 32 bytes.
    	File stride size set to 17 * record size.
                                                                  random    random     bkwd    record    stride                                    
                  kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
              102400       4   105475   150901   165040   168152    55921   146649                                                          
              102400      16   323077   419261   446377   452714   199703   418553                                                          
              102400     512  1035241  1048622   962876   983026   776039  1044747                                                          
              102400    1024  1066733  1024204   922389   946779   863405  1042164                                                          
              102400   16384   942288  1384367  1395018  1457672  1446158  1372405                                                          
    
    iozone test complete.
    
  • 4.20.0-1081-ayufan & 4.20.0-1083-ayufan released

    1081 & 1083

    mmc: core: Add MMC Command Queue Support kernel parameter

    This parameter offers a workaround for cards that report command queue
    (CMDQ) support but don't work correctly when CMDQ is enabled. At least
    some ROCKPro64 + Foresee (32GB) eMMC card combinations have trouble
    working correctly. Setting mmc_cmdqueue=off in kernel command line
    disables CMDQ support and may help with troublesome hardware.

  • Mainline 5.4.x

    Images
    2
    0 Stimmen
    2 Beiträge
    348 Aufrufe
    FrankMF

    Bootet bei mir weder von USB3-SSD noch von SD-Karte.

    USB3-SSD -> https://pastebin.com/QAS92sme
    SD-Karte -> https://pastebin.com/Bsr3WLJ7

  • ROCKPro64 - WLan-Antennen

    Hardware
    1
    0 Stimmen
    1 Beiträge
    275 Aufrufe
    Niemand hat geantwortet
  • ROCKPro64 - Armbian - NAS umgezogen

    Armbian
    2
    0 Stimmen
    2 Beiträge
    593 Aufrufe
    FrankMF

    Das NAS mit den drei 2,5 Zoll HDD Platten läuft an einem 3A Netzteil - ohne Probleme. Hat heute Nacht die Jobs einwandfrei erledigt 😉

    Link Preview Image PINE64 Community

    PINE64 is a large, vibrant and diverse community and creates software, documentation and projects.

    favicon

    (www.pine64.org)

  • NVMe-Platte einrichten

    ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    2k Aufrufe
    Niemand hat geantwortet
  • RockPro64 - Firewall mit zwei LAN Schnittstellen!

    Verschoben ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    801 Aufrufe
    Niemand hat geantwortet
  • ROCKPro64 - kein WLan-Modul möglich?

    ROCKPro64
    4
    0 Stimmen
    4 Beiträge
    2k Aufrufe
    FrankMF

    Heute, 5 Monate später, kann ich bestätigen das WLan möglich ist 🙂 Getestet auf einem ROCKPro64 v2.1 mit 2GB RAM.

    Eine Vorabversion von Recalbox machte es das erste Mal für mich möglich das WLan zu benutzen. Bericht

    Und PCIe ist abgeschaltet im dts File.

    pcie-phy { compatible = "rockchip,rk3399-pcie-phy"; #phy-cells = <0x0>; rockchip,grf = <0x15>; clocks = <0x8 0x8a>; clock-names = "refclk"; resets = <0x8 0x87>; reset-names = "phy"; status = "disabled"; phandle = <0x8b>; }; pcie@f8000000 { compatible = "rockchip,rk3399-pcie"; #address-cells = <0x3>; #size-cells = <0x2>; aspm-no-l0s; clocks = <0x8 0xc5 0x8 0xc4 0x8 0x147 0x8 0xa0>; clock-names = "aclk", "aclk-perf", "hclk", "pm"; bus-range = <0x0 0x1f>; max-link-speed = <0x2>; linux,pci-domain = <0x0>; msi-map = <0x0 0x89 0x0 0x1000>; interrupts = <0x0 0x31 0x4 0x0 0x0 0x32 0x4 0x0 0x0 0x33 0x4 0x0>; interrupt-names = "sys", "legacy", "client"; #interrupt-cells = <0x1>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 0x8a 0x0 0x0 0x0 0x0 0x2 0x8a 0x1 0x0 0x0 0x0 0x3 0x8a 0x2 0x0 0x0 0x0 0x4 0x8a 0x3>; phys = <0x8b>; phy-names = "pcie-phy"; ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; reg = <0x0 0xf8000000 0x0 0x2000000 0x0 0xfd000000 0x0 0x1000000>; reg-names = "axi-base", "apb-base"; resets = <0x8 0x82 0x8 0x83 0x8 0x84 0x8 0x85 0x8 0x86 0x8 0x81 0x8 0x80>; reset-names = "core", "mgmt", "mgmt-sticky", "pipe", "pm", "pclk", "aclk"; status = "disabled";

    Also bleibt weiterhin ungeklärt, ob auch beides zusammen möglich ist. Also gleichzeitig das WLan-Modul und eine PCIe Karte.

  • Bionic Minimal 0.7.7 - Vergleich 4.4.132 & 4.18.0-rc3-1046

    Verschoben Archiv
    1
    0 Stimmen
    1 Beiträge
    581 Aufrufe
    Niemand hat geantwortet
  • Lokale Einstellungen

    Verschoben ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    563 Aufrufe
    Niemand hat geantwortet