Skip to content

Images 0.11.x

Images
  • Kamil muss irgendwie gerade nichts anderes zu tuen haben 😉

    Hier ist nach ganz langer Pause ein Pre-Release 0.11.0

    0.11.0: gitlab-ci-linux-build-185 released

    • 0.11.0: Try to use 2021.04 uboot and 5.12.0 kernel

    Download läuft 🙂

    Danke Kamil!!

  • Ein ganz schneller Test gestern Abend brachte dann folgendes Ergebnis.

    ohne SPI

    • Image auf SD-Karte - Bootvorgang OK

    u-boot im SPI

    • kein Boot von SSD an USB2 oder USB2

    Fehlermeldung vom Boot von meiner NVMe Debian Installation

    U-Boot SPL 2021.04-ayufan-2018-g54ae1197 (May 06 2021 - 14:45:34 +0000)         
    Trying to boot from SPI                                                         
    Trying to boot from SPI                                                         
    Trying to boot from MMC1                                                        
    Card did not respond to voltage select! : -110                                  
    spl: mmc init failed with error: -95                                            
    Trying to boot from MMC2                                                        
    Card did not respond to voltage select! : -110                                  
    spl: mmc init failed with error: -95                                            
    SPL: failed to boot from all boot devices                                       
    ### ERROR ### Please RESET the board ###     
    

    Also, noch ganz früher Pre-Release. Mal schauen ob Kamil noch was dran macht. Das Image von der SD-Karte kann man nutzen.

  • 0.11.1: gitlab-ci-linux-build-186 released

    • 0.11.1: Update to 2021.07 and 5.13.0 kernel
    • 0.11.0: Try to use 2021.04 uboot and 5.12.0 kernel

    SD-Karte bootet erfolgreich.

    frank@frank-MS-7C37:~$ ssh rock64@192.168.3.172
    rock64@192.168.3.172's password: 
                    _                     __   _  _   
     _ __ ___   ___| | ___ __  _ __ ___  / /_ | || |  
    | '__/ _ \ / __| |/ / '_ \| '__/ _ \| '_ \| || |_ 
    | | | (_) | (__|   <| |_) | | | (_) | (_) |__   _|
    |_|  \___/ \___|_|\_\ .__/|_|  \___/ \___/   |_|  
                        |_|                           
    Linux rockpro64 5.13.0-1150-ayufan-g7a7e95f66648 #ayufan SMP Tue Jul 20 10:01:52 UTC 2021 aarch64
    
    The programs included with the Debian GNU/Linux system are free software;
    the exact distribution terms for each program are described in the
    individual files in /usr/share/doc/*/copyright.
    
    Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
    permitted by applicable law.
    Last login: Tue Jul 20 13:26:17 2021 from 192.168.3.213
    rock64@rockpro64:~$ uname -a
    Linux rockpro64 5.13.0-1150-ayufan-g7a7e95f66648 #ayufan SMP Tue Jul 20 10:01:52 UTC 2021 aarch64 GNU/Linux
    
  • Der uboot bootet immer noch nicht korrekt aus dem SPI 😞

    Ich habe mal einen Issues Request erstellt, damit Kamil das Problem kennt. Keine Ahnung, ob der da noch intensiv dran arbeitet.

  • 0.11.2: gitlab-ci-linux-build-187 released

    • 0.11.2: Update OMV install (to also be able to run OMV6)

  • 0 Stimmen
    1 Beiträge
    117 Aufrufe
    Niemand hat geantwortet
  • 0 Stimmen
    4 Beiträge
    639 Aufrufe
    FrankMF

    Ich parke das mal hier, damit ich das nicht noch mal vergesse. Hat mich eben mal wieder eine Stunde gekostet 😞

    /etc/ansible/ansible.cfg

    [defaults] host_key_checking = False

    Edit -> https://linux-nerds.org/topic/1493/ansible-host_key_checking

  • Restic v0.16.0 released

    Restic
    1
    0 Stimmen
    1 Beiträge
    89 Aufrufe
    Niemand hat geantwortet
  • Ubiquiti ER-X - iperf

    Verschoben OpenWRT & Ubiquiti ER-X
    2
    0 Stimmen
    2 Beiträge
    252 Aufrufe
    FrankMF

    Hier noch ein Test von DMZ / LAN und andersrum.

    frank@frank-MS-7C37:~$ iperf3 -c 192.168.5.15 Connecting to host 192.168.5.15, port 5201 [ 5] local 192.168.3.213 port 44052 connected to 192.168.5.15 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 114 MBytes 952 Mbits/sec 314 153 KBytes [ 5] 1.00-2.00 sec 112 MBytes 937 Mbits/sec 259 205 KBytes [ 5] 2.00-3.00 sec 111 MBytes 929 Mbits/sec 210 212 KBytes [ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec 235 202 KBytes [ 5] 4.00-5.00 sec 112 MBytes 936 Mbits/sec 263 153 KBytes [ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec 255 209 KBytes [ 5] 6.00-7.00 sec 112 MBytes 937 Mbits/sec 313 129 KBytes [ 5] 7.00-8.00 sec 111 MBytes 932 Mbits/sec 296 209 KBytes [ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec 258 208 KBytes [ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec 292 201 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.09 GBytes 936 Mbits/sec 2695 sender [ 5] 0.00-10.00 sec 1.09 GBytes 935 Mbits/sec receiver iperf Done. frank@frank-MS-7C37:~$ iperf3 -R -c 192.168.5.15 Connecting to host 192.168.5.15, port 5201 Reverse mode, remote host 192.168.5.15 is sending [ 5] local 192.168.3.213 port 44058 connected to 192.168.5.15 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 109 MBytes 911 Mbits/sec [ 5] 1.00-2.00 sec 109 MBytes 912 Mbits/sec [ 5] 2.00-3.00 sec 109 MBytes 912 Mbits/sec [ 5] 3.00-4.00 sec 109 MBytes 912 Mbits/sec [ 5] 4.00-5.00 sec 109 MBytes 912 Mbits/sec [ 5] 5.00-6.00 sec 108 MBytes 903 Mbits/sec [ 5] 6.00-7.00 sec 109 MBytes 912 Mbits/sec [ 5] 7.00-8.00 sec 109 MBytes 912 Mbits/sec [ 5] 8.00-9.00 sec 109 MBytes 912 Mbits/sec [ 5] 9.00-10.00 sec 109 MBytes 912 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.06 GBytes 913 Mbits/sec 114 sender [ 5] 0.00-10.00 sec 1.06 GBytes 911 Mbits/sec receiver iperf Done.
  • ClusterSSH

    Angeheftet Linux
    4
    0 Stimmen
    4 Beiträge
    712 Aufrufe
    FrankMF

    Mal wieder lange dran rumgefummelt, bis es passte.

    I have figured out how to use any font in xterm. So for the case of the mentioned Inconsolata font size 14, the following works:

    Add these 2 lines into ~/.Xresources (create it if it does not exist)

    XTermfaceName: Inconsolata
    XTermfaceSize: 14

    Then, tell xterm to use this file:

    export XENVIRONMENT="${HOME}/.Xresources"

    Preferably add this export into .bashrc, so that it is persistent.

    comment out the font settings in ~/.clusterssh/config, if it exists: # terminal_font=6x13

    Quelle: https://unix.stackexchange.com/questions/230106/cluster-ssh-specify-terminal-font

  • Images 0.9.x

    Images
    13
    0 Stimmen
    13 Beiträge
    764 Aufrufe
    FrankMF

    0.9.16: gitlab-ci-linux-build-163 released

    0.9.x 0.9.16: Bump kernel to 4.4.197, 0.9.15: Bump kernel to 4.4.193, 0.9.14: Bump kernel to 4.4.190, 0.9.14: Fix Firefox video playback, 0.9.13: Bump sound volume for Pinebook Pro, 0.9.12: Fix LXDE for Rock64, 0.9.10: Fix support for power/standby LEDs for all boards,
  • Images 0.7.x

    Images
    22
    0 Stimmen
    22 Beiträge
    3k Aufrufe
    FrankMF

    Ayufan Images nutzen

    user: rock64 pw: rock64
  • Images 0.6.x

    Verschoben Images
    30
    0 Stimmen
    30 Beiträge
    6k Aufrufe
    FrankMF

    0.6.60 released

    0.6.60: Fix pcie/nvme/sata support for 4.4, 0.6.60: Fix spi-flash access for 4.4/mainline,

    Ich bin davon ausgegangen, das 0.6.x nict mehr fortgeführt wird, okay - sieht nicht so aus.

    Sollte released werden, ist aber aus irgendeinem Grund gestern nicht passiert (lt. Kamil)