Skip to content
linux-nerds.org

linux-nerds.org
  1. Übersicht
  2. Pine64
  3. ROCKPro64
  4. ROCKPro64 - PCIe SATA-Karte macht immer mal Probleme

ROCKPro64 - PCIe SATA-Karte macht immer mal Probleme

ROCKPro64
  • FrankMF

    Ich habe ja ein NAS mit dieser Karte aufgebaut und es auch lange so benutzt. Aber immer wieder kam es zu, für mich, unerklärlichen Problemen.

    Eine Platte des RAID1 verschwindet einfach so. Haufenweise Errormeldungen in dmesg. Einen Verdacht, den ich schon länger hege, könnte evt. auch was mit diesem Thread zu tuen haben.

    Link Preview Image
    Rockpro64 Sata Card kills itself

    favicon

    (forum.pine64.org)

    Interessanterweise kommt das Thema Stromversorgung da zur Sprache. Ich benutze für das NAS das 3A Netzteil und habe mir da mit zwei 2,5 Zoll HDDs nie Sorgen drum gemacht. Da ich den Verdacht habe, das die Probleme nur bei sehr viel Schreibarbeit der Platten vorkommt, könnte es doch was mit der Stromversorgung zu tuen haben.

    Zwei Optionen hätte ich zum Testen

    • 5A Netzteil von Pine64
    • ATX Netzteil

    Aktuell läuft das NAS ohne Probleme seit 6 Tagen, hat aber auch zur Zeit nichts zu tuen.

    rock64@rockpro64v_2_1:~$ uptime
 13:40:05 up 6 days, 18:22,  1 user,  load average: 0,00, 0,00, 0,00

    Fangen wir mit dem 5A-Netzteil an und richten mal wieder einen Cronjob ein, der was Stress erzeugt 😉

    Im Fediverse -> @FrankM@nrw.social

    1. NanoPi R5S
    2. Quartz64 Model B, 4GB RAM
    3. Quartz64 Model A, 4GB RAM
    4. RockPro64 v2.1
    0
  • FrankMF

    Das ist das Ergebnis des Stresstests 😞

    [ 2461.489468] ata2.00: exception Emask 0x10 SAct 0xffffffff SErr 0x400000 action 0x6 frozen
[ 2461.490206] ata2.00: irq_stat 0x08000000, interface fatal error
[ 2461.490732] ata2: SError: { Handshk }
[ 2461.491062] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.491532] ata2.00: cmd 61/40:00:f8:a6:64/05:00:84:00:00/40 tag 0 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.492993] ata2.00: status: { DRDY }
[ 2461.493327] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.493796] ata2.00: cmd 61/c0:08:38:ac:64/03:00:84:00:00/40 tag 1 ncq dma 491520 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.495181] ata2.00: status: { DRDY }
[ 2461.495507] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.496276] ata2.00: cmd 61/c0:10:a0:f5:64/02:00:84:00:00/40 tag 2 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.497697] ata2.00: status: { DRDY }
[ 2461.498029] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.498497] ata2.00: cmd 61/40:18:60:f8:64/05:00:84:00:00/40 tag 3 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.499886] ata2.00: status: { DRDY }
[ 2461.500213] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.500681] ata2.00: cmd 61/c0:20:a0:fd:64/02:00:84:00:00/40 tag 4 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.502087] ata2.00: status: { DRDY }
[ 2461.502416] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.502884] ata2.00: cmd 61/40:28:60:00:65/05:00:84:00:00/40 tag 5 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.505026] ata2.00: status: { DRDY }
[ 2461.505378] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.505852] ata2.00: cmd 61/c0:30:a0:05:65/02:00:84:00:00/40 tag 6 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.507244] ata2.00: status: { DRDY }
[ 2461.507572] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.508040] ata2.00: cmd 61/40:38:60:08:65/05:00:84:00:00/40 tag 7 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.509472] ata2.00: status: { DRDY }
[ 2461.509808] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.510277] ata2.00: cmd 61/a0:40:a0:0d:65/02:00:84:00:00/40 tag 8 ncq dma 344064 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.511667] ata2.00: status: { DRDY }
[ 2461.511994] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.512461] ata2.00: cmd 61/40:48:00:20:66/05:00:84:00:00/40 tag 9 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.514503] ata2.00: status: { DRDY }
[ 2461.514850] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.515322] ata2.00: cmd 61/40:50:00:28:66/05:00:84:00:00/40 tag 10 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.516721] ata2.00: status: { DRDY }
[ 2461.517084] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.517562] ata2.00: cmd 61/c0:58:40:2d:66/02:00:84:00:00/40 tag 11 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.519253] ata2.00: status: { DRDY }
[ 2461.519595] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.520066] ata2.00: cmd 61/40:60:f8:9e:64/05:00:84:00:00/40 tag 12 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.521504] ata2.00: status: { DRDY }
[ 2461.521840] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.522309] ata2.00: cmd 61/c0:68:38:a4:64/02:00:84:00:00/40 tag 13 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.523706] ata2.00: status: { DRDY }
[ 2461.524033] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.524501] ata2.00: cmd 61/40:70:f8:af:64/05:00:84:00:00/40 tag 14 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.525925] ata2.00: status: { DRDY }
[ 2461.526256] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.526725] ata2.00: cmd 61/c0:78:38:b5:64/02:00:84:00:00/40 tag 15 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.528122] ata2.00: status: { DRDY }
[ 2461.528449] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.528939] ata2.00: cmd 61/40:80:f8:b7:64/05:00:84:00:00/40 tag 16 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.530339] ata2.00: status: { DRDY }
[ 2461.530667] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.531136] ata2.00: cmd 61/c0:88:38:bd:64/02:00:84:00:00/40 tag 17 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.532532] ata2.00: status: { DRDY }
[ 2461.532880] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.533357] ata2.00: cmd 61/40:90:f8:bf:64/05:00:84:00:00/40 tag 18 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.534754] ata2.00: status: { DRDY }
[ 2461.535081] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.535549] ata2.00: cmd 61/c0:98:38:c5:64/02:00:84:00:00/40 tag 19 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.536970] ata2.00: status: { DRDY }
[ 2461.537301] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.537769] ata2.00: cmd 61/40:a0:f8:c7:64/05:00:84:00:00/40 tag 20 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.539165] ata2.00: status: { DRDY }
[ 2461.539491] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.539960] ata2.00: cmd 61/c0:a8:38:cd:64/02:00:84:00:00/40 tag 21 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.541381] ata2.00: status: { DRDY }
[ 2461.541713] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.542182] ata2.00: cmd 61/40:b0:f8:cf:64/05:00:84:00:00/40 tag 22 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.543577] ata2.00: status: { DRDY }
[ 2461.543905] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.544374] ata2.00: cmd 61/40:b8:f8:d7:64/05:00:84:00:00/40 tag 23 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.545790] ata2.00: status: { DRDY }
[ 2461.546120] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.546589] ata2.00: cmd 61/c0:c0:38:dd:64/02:00:84:00:00/40 tag 24 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.547987] ata2.00: status: { DRDY }
[ 2461.548314] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.548782] ata2.00: cmd 61/a8:c8:f8:df:64/05:00:84:00:00/40 tag 25 ncq dma 741376 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.550198] ata2.00: status: { DRDY }
[ 2461.550530] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.550999] ata2.00: cmd 61/c0:d0:a0:e5:64/02:00:84:00:00/40 tag 26 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.552396] ata2.00: status: { DRDY }
[ 2461.552723] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.553208] ata2.00: cmd 61/40:d8:60:e8:64/05:00:84:00:00/40 tag 27 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.554607] ata2.00: status: { DRDY }
[ 2461.554935] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.555404] ata2.00: cmd 61/c0:e0:a0:ed:64/02:00:84:00:00/40 tag 28 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.556800] ata2.00: status: { DRDY }
[ 2461.557145] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.557617] ata2.00: cmd 61/40:e8:60:f0:64/05:00:84:00:00/40 tag 29 ncq dma 688128 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.559012] ata2.00: status: { DRDY }
[ 2461.559340] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.559807] ata2.00: cmd 61/c0:f0:38:d5:64/02:00:84:00:00/40 tag 30 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.561221] ata2.00: status: { DRDY }
[ 2461.561552] ata2.00: failed command: WRITE FPDMA QUEUED
[ 2461.562021] ata2.00: cmd 61/c0:f8:40:25:66/02:00:84:00:00/40 tag 31 ncq dma 360448 out
                        res 40/00:50:00:28:66/00:00:84:00:00/40 Emask 0x10 (ATA bus error)
[ 2461.563416] ata2.00: status: { DRDY }
[ 2461.563752] ata2: hard resetting link
[ 2471.561504] ata2: softreset failed (1st FIS failed)
[ 2471.561959] ata2: hard resetting link
[ 2481.560785] ata2: softreset failed (1st FIS failed)
[ 2481.561238] ata2: hard resetting link
[ 2516.561654] ata2: softreset failed (1st FIS failed)
[ 2516.562109] ata2: limiting SATA link speed to 3.0 Gbps
[ 2516.562113] ata2: hard resetting link
[ 2521.561261] ata2: softreset failed (1st FIS failed)
[ 2521.561715] ata2: reset failed, giving up
[ 2521.562074] ata2.00: disabled
[ 2521.562575] ata2: EH complete
[ 2521.562677] sd 1:0:0:0: [sdb] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.562686] sd 1:0:0:0: [sdb] tag#18 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
[ 2521.562701] print_req_error: I/O error, dev sdb, sector 0
[ 2521.562791] sd 1:0:0:0: [sdb] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.562802] sd 1:0:0:0: [sdb] tag#19 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.562873] sd 1:0:0:0: [sdb] tag#19 CDB: opcode=0x2a 2a 00 84 66 25 40 00 02 c0 00
[ 2521.562888] print_req_error: I/O error, dev sdb, sector 2221286720
[ 2521.563107] sd 1:0:0:0: [sdb] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.563126] sd 1:0:0:0: [sdb] tag#21 CDB: opcode=0x2a 2a 00 84 64 f0 60 00 05 40 00
[ 2521.563138] print_req_error: I/O error, dev sdb, sector 2221207648
[ 2521.563422] sd 1:0:0:0: [sdb] tag#22 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.563772] sd 1:0:0:0: [sdb] tag#20 CDB: opcode=0x2a 2a 00 84 64 d5 38 00 02 c0 00
[ 2521.564326] print_req_error: I/O error, dev sdb, sector 2221200696
[ 2521.564337] sd 1:0:0:0: [sdb] tag#22 CDB: opcode=0x2a 2a 00 84 64 ed a0 00 02 c0 00
[ 2521.564896] print_req_error: I/O error, dev sdb, sector 2221206944
[ 2521.565088] sd 1:0:0:0: [sdb] tag#26 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.565469] sd 1:0:0:0: [sdb] tag#26 CDB: opcode=0x2a 2a 00 84 64 dd 38 00 02 c0 00
[ 2521.565483] print_req_error: I/O error, dev sdb, sector 2221202744
[ 2521.565610] sd 1:0:0:0: [sdb] tag#23 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.566056] sd 1:0:0:0: [sdb] tag#23 CDB: opcode=0x2a 2a 00 84 64 e8 60 00 05 40 00
[ 2521.566069] print_req_error: I/O error, dev sdb, sector 2221205600
[ 2521.566183] sd 1:0:0:0: [sdb] tag#29 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.566641] sd 1:0:0:0: [sdb] tag#29 CDB: opcode=0x2a 2a 00 84 64 cd 38 00 02 c0 00
[ 2521.566654] print_req_error: I/O error, dev sdb, sector 2221198648
[ 2521.566954] sd 1:0:0:0: [sdb] tag#24 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.567224] sd 1:0:0:0: [sdb] tag#24 CDB: opcode=0x2a 2a 00 84 64 e5 a0 00 02 c0 00
[ 2521.567237] print_req_error: I/O error, dev sdb, sector 2221204896
[ 2521.567459] sd 1:0:0:0: [sdb] tag#30 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2521.567809] sd 1:0:0:0: [sdb] tag#30 CDB: opcode=0x2a 2a 00 84 64 c7 f8 00 05 40 00
[ 2521.567821] print_req_error: I/O error, dev sdb, sector 2221197304
[ 2521.584903] md: super_written gets error=10
[ 2521.585306] md/raid1:md0: Disk failure on dm-1, disabling device.
               md/raid1:md0: Operation continuing on 1 devices.
[ 2526.581450] scsi_io_completion_action: 41779 callbacks suppressed
[ 2526.581461] sd 1:0:0:0: [sdb] tag#27 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.581467] sd 1:0:0:0: [sdb] tag#27 CDB: opcode=0x2a 2a 00 84 66 7d 50 00 00 01 00
[ 2526.581469] print_req_error: 41780 callbacks suppressed
[ 2526.581471] print_req_error: I/O error, dev sdb, sector 2221309264
[ 2526.582524] sd 1:0:0:0: [sdb] tag#28 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.582530] sd 1:0:0:0: [sdb] tag#28 CDB: opcode=0x2a 2a 00 84 66 7d 51 00 00 01 00
[ 2526.582534] print_req_error: I/O error, dev sdb, sector 2221309265
[ 2526.583366] sd 1:0:0:0: [sdb] tag#29 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.583370] sd 1:0:0:0: [sdb] tag#29 CDB: opcode=0x2a 2a 00 84 66 7d 52 00 00 01 00
[ 2526.583373] print_req_error: I/O error, dev sdb, sector 2221309266
[ 2526.584113] sd 1:0:0:0: [sdb] tag#30 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.584117] sd 1:0:0:0: [sdb] tag#30 CDB: opcode=0x2a 2a 00 84 66 7d 53 00 00 01 00
[ 2526.584119] print_req_error: I/O error, dev sdb, sector 2221309267
[ 2526.584960] sd 1:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.584968] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 84 66 7d 54 00 00 01 00
[ 2526.584971] print_req_error: I/O error, dev sdb, sector 2221309268
[ 2526.585765] sd 1:0:0:0: [sdb] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.585769] sd 1:0:0:0: [sdb] tag#1 CDB: opcode=0x2a 2a 00 84 66 7d 55 00 00 01 00
[ 2526.585772] print_req_error: I/O error, dev sdb, sector 2221309269
[ 2526.586461] sd 1:0:0:0: [sdb] tag#2 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.586465] sd 1:0:0:0: [sdb] tag#2 CDB: opcode=0x2a 2a 00 84 66 7d 56 00 00 01 00
[ 2526.586468] print_req_error: I/O error, dev sdb, sector 2221309270
[ 2526.587144] sd 1:0:0:0: [sdb] tag#3 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.587148] sd 1:0:0:0: [sdb] tag#3 CDB: opcode=0x2a 2a 00 84 66 7d 57 00 00 01 00
[ 2526.587150] print_req_error: I/O error, dev sdb, sector 2221309271
[ 2526.587734] sd 1:0:0:0: [sdb] tag#4 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.587737] sd 1:0:0:0: [sdb] tag#4 CDB: opcode=0x2a 2a 00 84 66 7d 58 00 00 01 00
[ 2526.587739] print_req_error: I/O error, dev sdb, sector 2221309272
[ 2526.588320] sd 1:0:0:0: [sdb] tag#5 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
[ 2526.588323] sd 1:0:0:0: [sdb] tag#5 CDB: opcode=0x2a 2a 00 84 66 7d 59 00 00 01 00
[ 2526.588325] print_req_error: I/O error, dev sdb, sector 2221309273

    Und, wieder eine Platte im Raid1 verloren

    rock64@rockpro64v_2_1:~$ cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] 
md0 : active raid1 dm-1[2](F) dm-0[1]
      1953379392 blocks super 1.2 [2/1] [_U]
      bitmap: 5/15 pages [20KB], 65536KB chunk

unused devices: <none>

    Leider habe ich nicht die Kenntnisse um zu erkennen, woran das liegt.

    Im Fediverse -> @FrankM@nrw.social

    1. NanoPi R5S
    2. Quartz64 Model B, 4GB RAM
    3. Quartz64 Model A, 4GB RAM
    4. RockPro64 v2.1
    0

  • D

    FTDI Support (ayufan Kernel 5.0)

    Ungelöst Probleme?
    8
    0 Stimmen
    8 Beiträge
    556 Aufrufe
    K

    Hi, leider habe ich bisher keine Antwort von Kamil erhalten. So habe ich selbst mal einen Kernel kompiliert. Als Vorlage habe ich den Ayufan 5.3 rc4 1118 genommen. Also gleiche config nur zusätzlich den FTDI und den CH341 (Arduino clones) Treiber hinzugefügt. Könnt ihr ja mal bei Lust und Laune testen. Für meine Zwecke funktioniert er gut.
    Gruss
    https://drive.google.com/file/d/1kJarihL7bAqN9y6tK-m1V4zHCSEiEWtf/view?usp=sharing

  • FrankMF

    ROCKPro64 - USB-C -> HDMi

    ROCKPro64
    3
    0 Stimmen
    3 Beiträge
    435 Aufrufe
    FrankMF

    @hannescam Hallo! Das ist ja schon ein paar Tage her, gut das wir den Screenshot haben. Du könntest genau diese Kernel-Version vom Kamil suchen und benutzen. Da musste man kein Linux Held sein, Kable einstecken - Bild da.

    Ob das mit was Aktuellerem geht, weiß ich nicht. Debian kann man ja so installieren, wie findest Du hier im Forum. Ob Debian die USB-C Schnittstelle nutzt weiß ich nicht. muss man ausprobieren.

    Da für mich die Platinen immer nur ohne Desktop Sinn gemacht haben, habe ich so was immer nur ganz kurz angetestet. Nutze die SOCs eigentlich ausschließlich Headless.

  • FrankMF

    Der 3. ROCKPro64

    ROCKPro64
    3
    0 Stimmen
    3 Beiträge
    940 Aufrufe
    FrankMF

    Nachdem ich jetzt mein NAS neu gemacht habe, schauen wir mal, was die Chinesen geliefert haben. Bestellt hatte ich

    ROCKPro64 v2.1 2GB RAM Kühlkörper Netzteil 3A USB-Adapter für eMMC-Modul

    Endlich habe ich mal an den USB-Adapter für das eMMC-Modul gedacht 🙂

    0_1540029624802_IMG_20181020_115348_ergebnis.jpg

    Was ist mir aufgefallen? Das Versionsdatum ist neu (siehe oben) Die PCIe NVMe Karte ist neu

    Bei der PCIe NVMe Karte liegt eine Abstandshülse aus Messing und eine winzig kleine Schraube bei. Damit bekomme ich aber nicht die NVMe-SSD befestigt. Ich habe dann gemurkst 😉 Da sollte Pine64 unbedingt nachbessern!

    So sieht das dann zusammengebaut aus.

    0_1540029756582_IMG_20181020_115425_ergebnis.jpg

    0_1540029767082_IMG_20181020_115438_ergebnis.jpg

    Da ich ein paarmal gelesen hatte, das Leute Probleme mit dem PCIe NVMe Adapter hatten, direkt als erstes mal ein Test ob das reibungslos funktioniert.

    Sys rock64@rockpro64:/mnt$ uname -a Linux rockpro64 4.4.132-1075-rockchip-ayufan-ga83beded8524 #1 SMP Thu Jul 26 08:22:22 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux lspci rock64@rockpro64:/mnt$ sudo lspci -vvv [sudo] password for rock64: 00:00.0 PCI bridge: Rockchip Inc. RK3399 PCI Express Root Port Device 0100 (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort+ >SERR+ <PERR+ INTx- Latency: 0 Interrupt: pin A routed to IRQ 238 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff Memory behind bridge: fa000000-fa0fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME+ Capabilities: [90] MSI: Enable+ Count=1/1 Maskable+ 64bit+ Address: 00000000fee30040 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [b0] MSI-X: Enable- Count=1 Masked- Vector table: BAR=0 offset=00000000 PBA: BAR=0 offset=00000008 Capabilities: [c0] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L1, Exit Latency L0s <256ns, L1 <8us ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt+ AutBWInt+ LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power+ Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Via message ARIFwd+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [274 v1] Transaction Processing Hints Interrupt vector mode supported Device specific mode supported Steering table in TPH capability structure Kernel driver in use: pcieport 01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 (prog-if 02 [NVM Express]) Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 237 Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [b0] MSI-X: Enable+ Count=8 Masked- Vector table: BAR=0 offset=00003000 PBA: BAR=0 offset=00002000 Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [148 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [158 v1] Power Budgeting <?> Capabilities: [168 v1] #19 Capabilities: [188 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Capabilities: [190 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=10us PortTPowerOnTime=10us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=0us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us Kernel driver in use: nvme

    Da sieht alles gut aus. x4 alles Bestens!

    iozone rock64@rockpro64:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Iozone: Performance Test of File I/O Version $Revision: 3.429 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa. Run began: Sat Oct 20 10:08:28 2018 Include fsync in write timing O_DIRECT feature enabled Auto Mode File size set to 102400 kB Record Size 4 kB Record Size 16 kB Record Size 512 kB Record Size 1024 kB Record Size 16384 kB Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 63896 108269 91858 95309 32845 73173 102400 16 123393 236653 273766 275807 118450 199130 102400 512 471775 570571 484612 496942 441345 575817 102400 1024 544229 642558 508895 511834 486506 647765 102400 16384 1044520 1100322 1069825 1092146 1089301 1086757 iozone test complete.

    Das sieht nicht optimal aus, schau ich mir später an. Das hier soll nur ein kurzer Test sein ob das Board rennt 🙂

    Nachdem ich mittlerweile zwei ROCKPro64 im "produktiven" Einsatz habe, war es immer sehr mühsam mal eben was zu testen. Man will die anderen ja nicht immer ausmachen, dran rumhantieren usw. Deswegen jetzt der dritte, der im Moment dann die Rolle des Testkandidaten einnimmt. Ab sofort kann ich wieder nach Lust und Laune, neue Images testen usw.

  • FrankMF

    SATA Karte Marvell 88SE9230 Chipsatz

    Angeheftet Hardware
    19
    0 Stimmen
    19 Beiträge
    6k Aufrufe
    FrankMF

    Ok, es gibt noch eine andere Möglichkeit.

    Kamil hat mir noch ein wenig geholfen. Mit folgender Änderung werden die Platten gefunden.

    hmm, I had to add /etc/default/extlinux: libahci.skip_host_reset=1

    Sieht dann so aus.

    # Configure timeout to choose the kernel # TIMEOUT="10" # Configure default kernel to boot: check all kernels in `/boot/extlinux/extlinux.conf` # DEFAULT="kernel-4.4.126-rockchip-ayufan-253" # Configure additional kernel configuration options APPEND="$APPEND root=LABEL=linux-root rootwait rootfstype=ext4 libahci.skip_host_reset=1"

    Danach waren die Platten zu sehen.

    root@rockpro64:/tmp/etc/default# blkid /dev/sda2: SEC_TYPE="msdos" LABEL_FATBOOT="boot-efi" LABEL="boot-efi" UUID="ABCD-FC7D" TYPE="vfat" PARTLABEL="boot_efi" PARTUUID="72e36967-4050-4bb3-8f8f-bf6755c38f28" /dev/sda3: LABEL="linux-boot" UUID="8e289a3e-0f9b-4da1-a147-51e03390637c" TYPE="ext4" PARTLABEL="linux_boot" PARTUUID="fe944fd2-3e42-4202-8a95-656e9bdb4be6" /dev/sda4: LABEL="linux-root" UUID="3e9513c6-dfd1-48c9-bee2-04bb5a153056" TYPE="ext4" PARTLABEL="linux_root" PARTUUID="d2d1dd88-030d-4f74-998f-7c9ce7d385d0" /dev/sdb2: SEC_TYPE="msdos" LABEL_FATBOOT="boot-efi" LABEL="boot-efi" UUID="56C9-F745" TYPE="vfat" PARTLABEL="boot_efi" PARTUUID="919c8f73-5f25-4a01-9072-3a5ed9a88ff2" /dev/sdb3: LABEL="linux-boot" UUID="23c19647-f4a1-4197-a877-f1bb03456bef" TYPE="ext4" PARTLABEL="linux_boot" PARTUUID="093d0cc0-d122-4dce-aeb5-4e266b4b7d9d" /dev/sdb4: LABEL="linux-root" UUID="f1c74331-8318-4ee8-a4f7-f0c169fb9944" TYPE="ext4" PARTLABEL="linux_root" PARTUUID="964ab457-58d5-40c4-bb02-dfd37bd2f0da" /dev/sda1: PARTLABEL="loader1" PARTUUID="37466429-e4a4-495c-b9a1-3f74625a3cae" /dev/sdb1: PARTLABEL="loader1" PARTUUID="33f692b3-54cb-4a37-b602-21a2baf32fa0"

    Aber auch hiermit ist ein Boot von der SATA Platte nicht möglich.

    Ich möchte hier noch was vom kamil zitieren.

    (11:44:09) ayufanWithPM: will look later, but this controller is tricky, also on x86 as well
    (11:44:16) ayufanWithPM: jms585 seems to be significantly more stable

    Evt. bekommt er das gefixt 😉

  • FrankMF

    [HOWTO]ROCKPro64 - NAS bauen Teil 1

    Angeheftet ROCKPro64
    5
    0 Stimmen
    5 Beiträge
    2k Aufrufe
    FrankMF

    Die Pinne für den Adapter liegen ja nur parallel zum Eingang des Steckers vom Netzteil. Also, solange da nichts abfackelt kann man da eine Menge Strom drüber jagen 🙂

    Wenn es funktioniert ist ja alles gut.

  • FrankMF

    PCI-e X4 to M.2/NGFF NVMe SSD Interface Card

    Hardware
    1
    0 Stimmen
    1 Beiträge
    655 Aufrufe
    Niemand hat geantwortet
  • FrankMF

    ROCKPro64 - Schaltplan v2.1 veröffentlicht

    ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    852 Aufrufe
    Niemand hat geantwortet
  • FrankMF

    Wichtig!

    Verschoben Archiv
    1
    0 Stimmen
    1 Beiträge
    744 Aufrufe
    Niemand hat geantwortet