Skip to content

Kernel 4.4.x

Angeheftet Images
45 1 4.6k
  • 4.4.154-1105-rockchip-ayufan released

    • ayufan: dts: rockpro64: fix fan configuration
  • 4.4.154-1107-rockchip-ayufan released

    • ayufan: defconfig: support tehuti 10gbps adapter

    Unterstützung 10gbps Netzwerk-Adapter.

  • 4.4.154-1109-rockchip-ayufan released

    • ayufan: defconfig: support tehuti 10gbps adapter

    Das sollte uns dann USB-OTG bringen.

  • 4.4.154-1111-rockchip-ayufan released

    • ayufan: dts: rockpro64: disable tx checksumming for gmac
  • 4.4.154-1120-rockchip-ayufan released

    • UPSTREAM: usb: gadget: ether: Allow changing the MTU
    • UPSTREAM: ayufan: usb: gadget: ether: Allow jumbo frames
    • ayufan: gadget: ethernet: buffer 8 packets (wip)
  • 4.4.154-1122-rockchip-ayufan released

    • rockchip: pcie: limit bus number to 31 inclusive
  • 4.4.154-1124-rockchip-ayufan released

    • defconfig: use CONFIG_HZ=250
  • 4.4.154-1126-rockchip-ayufan released

  • 4.4.154-1128-rockchip-ayufan released ✌

    CONFIG_SQUASHFS_XZ=y (#41)

    cyberp: defconfig: squashfs xz for snap support

  • 4.4.154-1130-rockchip-ayufan released

    dts: rockpro64: Enabled sdio0 and defer it until pcie is ready

    Max defer time is 2000ms which should be enough for pcie to
    get initialized. This is a workaround for issue with unstable
    pcie training if both sdio0 and pcie are enabled in rockpro64
    device tree.

  • Der Kernel 4.4.154-1130-rockchip-ayufan funktioniert bei mir nicht! Kernel Panic!

    Hardware

    • ROCKPro64v2.1 mit 2GB RAM
    • PCIe NVMe SSD Samsung 960 EVO
    • Pine64 WiFi-Modul
    • Boot von SD-Karte
  • 4.4.154-1132-rockchip-ayufan released

  • 4.4.154-1134-rockchip-ayufan released

    ayufan: rockpro64: enable uart0 for bt

    PCIe & WiFi-Modul geht immer noch nicht. Aber, Kamil hat einen neuen Release angeschmissen.

  • 4.4.167-1138-rockchip-ayufan released

    ayufan: defconfig: disable broken kernel modules

  • 4.4.167-1140-rockchip-ayufan released

    ayufan: stmmac: disable TX offload for mtu bigger than 1498

    Zum Thema bitte auch diesen Beitrag lesen.

    • 4.4.167-1146-rockchip-ayufan
    • 4.4.167-1148-rockchip-ayufan
    • 4.4.167-1151-rockchip-ayufan
    • 4.4.167-1153-rockchip-ayufan

    Änderungen:

    • ayufan: rockchip-vpu: fix compilation errors
    • ayufan: dts: rockpro64: fix es8316 support
    • ayufan: dts: rockpro64: add missing gpu_power_model for MALI
    • ayufan: dts: pinebook-pro: fix support for sound-out

    Ayufan bereitet die Images für das kommende Pinbook Pro vor.

    • 4.4.167-1155-rockchip-ayufan
    • 4.4.167-1157-rockchip-ayufan
    • 4.4.167-1159-rockchip-ayufan
    • 4.4.167-1161-rockchip-ayufan

    Änderungen

    • ayufan: dts: pinebook-pro: change bt/audio supply according to Android changes
    • ayufan: dts: rock64: remove unused ir-receiver
    • ayufan: dts: pinebook-pro: fix display port output
    • ayufan: dts: pinebook-pro: fix display port output
  • 4.4.167-1165-rockchip-ayufan released

    • ayufan: dts: rockpro64: enable 1.992GHz OPP
  • 4.4.167-1167-rockchip-ayufan released

    • ayufan: dts: pinebook-pro: fix eDP resolution
  • 4.4.167-1169-rockchip-ayufan released

    • nuumio: dts/c: rockpro64: add pcie scan sleep and enable it for rockpro64 (#45)

  • ROCKPro64 - Zwei LAN Schnittstellen / VLAN einrichten

    ROCKPro64 linux vlan rockpro64
    4
    0 Stimmen
    4 Beiträge
    682 Aufrufe
    FrankMF
    Das Setup heute mal getestet um zu sehen, ob das auch so funktioniert. LAN an meine Fritzbox (DHCP) an eth1.100 mein Notebook an eth1.200 meine PS4 Und dann mal gemütlich eine Runde MW gezockt. Läuft alles einwandfrei
  • ROCKPro64 - Booten von USB3

    ROCKPro64 rockpro64
    3
    0 Stimmen
    3 Beiträge
    444 Aufrufe
    FrankMF
    Yeah, genau das worauf ich auch warte. Wenn ich das richtig mitbekommen habe, könnte das Kamil's nächster Punkt auf seiner Liste sein.
  • Der 3. ROCKPro64

    ROCKPro64 rockpro64
    3
    0 Stimmen
    3 Beiträge
    1k Aufrufe
    FrankMF
    Nachdem ich jetzt mein NAS neu gemacht habe, schauen wir mal, was die Chinesen geliefert haben. Bestellt hatte ich ROCKPro64 v2.1 2GB RAM Kühlkörper Netzteil 3A USB-Adapter für eMMC-Modul Endlich habe ich mal an den USB-Adapter für das eMMC-Modul gedacht [image: 1540029625079-img_20181020_115348_ergebnis-resized.jpg] Was ist mir aufgefallen? Das Versionsdatum ist neu (siehe oben) Die PCIe NVMe Karte ist neu Bei der PCIe NVMe Karte liegt eine Abstandshülse aus Messing und eine winzig kleine Schraube bei. Damit bekomme ich aber nicht die NVMe-SSD befestigt. Ich habe dann gemurkst Da sollte Pine64 unbedingt nachbessern! So sieht das dann zusammengebaut aus. [image: 1540029757102-img_20181020_115425_ergebnis-resized.jpg] [image: 1540029767472-img_20181020_115438_ergebnis.jpg] Da ich ein paarmal gelesen hatte, das Leute Probleme mit dem PCIe NVMe Adapter hatten, direkt als erstes mal ein Test ob das reibungslos funktioniert. Sys rock64@rockpro64:/mnt$ uname -a Linux rockpro64 4.4.132-1075-rockchip-ayufan-ga83beded8524 #1 SMP Thu Jul 26 08:22:22 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux lspci rock64@rockpro64:/mnt$ sudo lspci -vvv [sudo] password for rock64: 00:00.0 PCI bridge: Rockchip Inc. RK3399 PCI Express Root Port Device 0100 (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort+ >SERR+ <PERR+ INTx- Latency: 0 Interrupt: pin A routed to IRQ 238 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff Memory behind bridge: fa000000-fa0fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME+ Capabilities: [90] MSI: Enable+ Count=1/1 Maskable+ 64bit+ Address: 00000000fee30040 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [b0] MSI-X: Enable- Count=1 Masked- Vector table: BAR=0 offset=00000000 PBA: BAR=0 offset=00000008 Capabilities: [c0] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L1, Exit Latency L0s <256ns, L1 <8us ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt+ AutBWInt+ LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power+ Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Via message ARIFwd+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [274 v1] Transaction Processing Hints Interrupt vector mode supported Device specific mode supported Steering table in TPH capability structure Kernel driver in use: pcieport 01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 (prog-if 02 [NVM Express]) Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 237 Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [b0] MSI-X: Enable+ Count=8 Masked- Vector table: BAR=0 offset=00003000 PBA: BAR=0 offset=00002000 Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [148 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [158 v1] Power Budgeting <?> Capabilities: [168 v1] #19 Capabilities: [188 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Capabilities: [190 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=10us PortTPowerOnTime=10us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=0us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us Kernel driver in use: nvme Da sieht alles gut aus. x4 alles Bestens! iozone rock64@rockpro64:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Iozone: Performance Test of File I/O Version $Revision: 3.429 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa. Run began: Sat Oct 20 10:08:28 2018 Include fsync in write timing O_DIRECT feature enabled Auto Mode File size set to 102400 kB Record Size 4 kB Record Size 16 kB Record Size 512 kB Record Size 1024 kB Record Size 16384 kB Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 63896 108269 91858 95309 32845 73173 102400 16 123393 236653 273766 275807 118450 199130 102400 512 471775 570571 484612 496942 441345 575817 102400 1024 544229 642558 508895 511834 486506 647765 102400 16384 1044520 1100322 1069825 1092146 1089301 1086757 iozone test complete. Das sieht nicht optimal aus, schau ich mir später an. Das hier soll nur ein kurzer Test sein ob das Board rennt Nachdem ich mittlerweile zwei ROCKPro64 im "produktiven" Einsatz habe, war es immer sehr mühsam mal eben was zu testen. Man will die anderen ja nicht immer ausmachen, dran rumhantieren usw. Deswegen jetzt der dritte, der im Moment dann die Rolle des Testkandidaten einnimmt. Ab sofort kann ich wieder nach Lust und Laune, neue Images testen usw.
  • ROCKPro64 - Docker Image

    ROCKPro64 docker rockpro64
    4
    1
    0 Stimmen
    4 Beiträge
    1k Aufrufe
    FrankMF
    Das ganze hat einen furchtbar schönen Vorteil. Mal angenommen, ich habe ein NodeBB-Forum in einem Container laufen. Will das Ding updaten und das crasht einfach mal so. Egal, Container stoppen, Container starten und alles läuft wieder. Mit dem Commit sichere ich mir dann den Zustand nachdem ich weiß, das alles klappt
  • [HOWTO]ROCKPro64 - NAS bauen Teil 1

    Angeheftet ROCKPro64 howto rockpro64
    5
    5
    0 Stimmen
    5 Beiträge
    2k Aufrufe
    FrankMF
    Die Pinne für den Adapter liegen ja nur parallel zum Eingang des Steckers vom Netzteil. Also, solange da nichts abfackelt kann man da eine Menge Strom drüber jagen Wenn es funktioniert ist ja alles gut.
  • ROCKPro64 - eMMC-Modul / SD-Karte auswählen

    Hardware hardware rockpro64
    3
    2
    0 Stimmen
    3 Beiträge
    2k Aufrufe
    FrankMF
    Echtes Problem gefunden. Wenn die eMMC-Karte verbaut ist, ich mit der SD-Karte starte (Jumper gesetzt), kann ich keinen Kernel updaten. Es ist alles ganz normal installiert, er startet aber immer den letzten vorhandenen. Jumper entfernt, eMMC-Modul entfernt! Bootvorgang mit unveränderter SD-Karte, neuer Kernel wird geladen. OK, das verstehe ich im Moment überhaupt nicht !?!?!?
  • ROCKPro64 wieder vorbestellbar

    ROCKPro64 rockpro64
    5
    0 Stimmen
    5 Beiträge
    1k Aufrufe
    FrankMF
    Meine Lieferung ist unterwegs Hello Mr. Frank Mankel, Order 62068 just shipped on July 18, 2018 from Shenzhen transit to Hong Kong DHL.
  • Links

    Angeheftet Linux rockpro64
    1
    0 Stimmen
    1 Beiträge
    795 Aufrufe
    Niemand hat geantwortet