Skip to content

Images 0.9.x

Images
13 2 950 1
  • 0.9.0: gitlab-ci-linux-build-142 released

    • 0.9.0: Build Ubuntu/Disco (transitional release) and Debian/Buster (to replace Stretch),
    • 0.9.0: Update kernel branch to 4.4.184,

    Buster & Disco Images sind ab jetzt dabei, wie hier schon berichtet.

  • 0.9.3: gitlab-ci-linux-build-145 released

    • 0.9.3: Update kernel branch to 4.4.185,
    • 0.9.3: Disable OMV5 for now,
    • 0.9.2: Fix linux-package release due to fpm being broken,
    • 0.9.1: Build OMV5 (Debian/Buster),
    • 0.9.1: Fix ppas for Debian/Buster and Ubuntu/Disco,

  • Hallo, ich habe noch intermediate Release von den 0.8.x
    Kann ich von denen auf das aktuelle upgraden?
    Gruß,
    Christoph

  • Hallo @cnaed ,

    Release Versionen aktualisiert er ja sowieso, auf eine Pre-Release Version zu aktualisieren bedarf etwas Handarbeit.

    nano /etc/apt/sources.list.d/ayufan-rock64.list
    

    Inhalt der Datei

    deb http://deb.ayufan.eu/orgs/ayufan-rock64/releases /
    
    # uncomment to use pre-release kernels and compatibility packages
    # deb http://deb.ayufan.eu/orgs/ayufan-rock64/pre-releases /
    

    Sollte selbsterklärend sein 😉

    Bei produktiven Systemen, vorher zweimal nachdenken, ob es sinnvoll ist das Update/Upgrade zu machen. Es kommt zwar aktuell selten vor, aber es gibt immer noch Probleme. z.B.: meine aktuelle Testinstallation mit SPI und USB3-Boot knallt ständig mit haufenweisen ext4 Fehler usw. Nicht so gut!

  • 0.9.4: gitlab-ci-linux-build-146 released

    • 0.9.4: Update kernel branch to 4.4.189,

  • Aktuell sind wir im Moment bei 0.9.8: gitlab-ci-linux-build-151

    • 0.9.8: Fix BT audio (run on 1.5M),
    • 0.9.8: Use DMA on UART/SPI,
    • 0.9.8: Lower temperature thresholds for Pinebook Pro,
    • 0.9.8: Set default audio device for all devices,
    • 0.9.8: Fix OMV4 build,
    • 0.9.8: Automatically enable h264ify,
    • 0.9.7: Include a list of used packages,
    • 0.9.7: Fix regression on compositing performance,
    • 0.9.7: Force password to change on first login,
    • 0.9.6: Support Pinebook Pro v2.1,
    • 0.9.6: Optimise suspend on Pinebook Pro,
    • 0.9.6: Optimise Mate styling,
    • 0.9.6: Optimise Touchpad settings for Pinebook Pro,
    • 0.9.6: Support 2/1.5GHz OPP on Pinebook Pro,
    • 0.9.5: Build Debian/Stretch/OMV4,
    • 0.9.5: Improve install_container_linux.sh,

    Quelle: https://github.com/ayufan-rock64/linux-build/releases/tag/0.9.8

  • 0.9.9: gitlab-ci-linux-build-152 released

    • 0.9.9: Fix Firefox video playback,
    • 0.9.9: Remove libmali-rk-dev from default install,
    • 0.9.9: Align standby/work leds across all boards,
    • 0.9.9: Disable Debug UART on Pinebook Pro, as it causes stability issues,
    • 0.9.9: Fix Pinebook Pro SD card stability,
    • 0.9.9: Enable PCIE NVME support for Pinebook Pro,
    • 0.9.8: Fix BT audio (run on 1.5M),
  • 0.9.10: gitlab-ci-linux-build-154 released

    • 0.9.10: Fix support for power/standby LEDs for all boards,
    • 0.9.10: Fix rock64 gpu acceleration regression introduced in 0.9.9,
    • 0.9.10: Replace lxdm to use lightdm, as this allows password change on login,
    • 0.9.10: Remove gnome-screensaver to fix double lock screen,
  • 0.9.11: gitlab-ci-linux-build-155 released

    • 0.9.11: Install unity-greeter,
  • 0.9.12: gitlab-ci-linux-build-156 released

    • 0.9.12: Fix LXDE for Rock64,
  • 0.9.13: gitlab-ci-linux-build-157 released

    • 0.9.13: Bump sound volume for Pinebook Pro,
    • 0.9.13: Fix Firefox video playback,
  • 0.9.14: gitlab-ci-linux-build-159 released

    • 0.9.14: Bump kernel to 4.4.190,
    • 0.9.14: Fix Firefox video playback,
  • 0.9.16: gitlab-ci-linux-build-163 released

    0.9.x

    • 0.9.16: Bump kernel to 4.4.197,
    • 0.9.15: Bump kernel to 4.4.193,
    • 0.9.14: Bump kernel to 4.4.190,
    • 0.9.14: Fix Firefox video playback,
    • 0.9.13: Bump sound volume for Pinebook Pro,
    • 0.9.12: Fix LXDE for Rock64,
    • 0.9.10: Fix support for power/standby LEDs for all boards,
  • Images 0.10.x

    Angeheftet Images rockpro64
    10
    0 Stimmen
    10 Beiträge
    595 Aufrufe
    FrankMF
    0.10.12: gitlab-ci-linux-build-184 released 0.10.12: Be strict on any qemu failures 0.10.12: Build by default mate/lxde/gnome/xfce4 0.10.12: Add pcie scan delay from @nuumio 0.10.12: Add ubuntu-mate-lightdm-theme where possible Ich komme gar nicht mehr mit dem Testen hinterher
  • Mainline 5.3.x

    Images rockpro64
    3
    0 Stimmen
    3 Beiträge
    487 Aufrufe
    FrankMF
    5.3.0-1119-ayufan released ayufan: defconfig: enable DRM_PANFROST/DRM_LIMA
  • ROCKPro64 - USB-C -> LAN

    ROCKPro64 rockpro64
    1
    0 Stimmen
    1 Beiträge
    331 Aufrufe
    Niemand hat geantwortet
  • ROCKPro64 (2GB) - Probleme mit der PCIe SATA-Karte??

    ROCKPro64 rockpro64
    1
    3
    0 Stimmen
    1 Beiträge
    509 Aufrufe
    Niemand hat geantwortet
  • Der 3. ROCKPro64

    ROCKPro64 rockpro64
    3
    0 Stimmen
    3 Beiträge
    1k Aufrufe
    FrankMF
    Nachdem ich jetzt mein NAS neu gemacht habe, schauen wir mal, was die Chinesen geliefert haben. Bestellt hatte ich ROCKPro64 v2.1 2GB RAM Kühlkörper Netzteil 3A USB-Adapter für eMMC-Modul Endlich habe ich mal an den USB-Adapter für das eMMC-Modul gedacht [image: 1540029625079-img_20181020_115348_ergebnis-resized.jpg] Was ist mir aufgefallen? Das Versionsdatum ist neu (siehe oben) Die PCIe NVMe Karte ist neu Bei der PCIe NVMe Karte liegt eine Abstandshülse aus Messing und eine winzig kleine Schraube bei. Damit bekomme ich aber nicht die NVMe-SSD befestigt. Ich habe dann gemurkst Da sollte Pine64 unbedingt nachbessern! So sieht das dann zusammengebaut aus. [image: 1540029757102-img_20181020_115425_ergebnis-resized.jpg] [image: 1540029767472-img_20181020_115438_ergebnis.jpg] Da ich ein paarmal gelesen hatte, das Leute Probleme mit dem PCIe NVMe Adapter hatten, direkt als erstes mal ein Test ob das reibungslos funktioniert. Sys rock64@rockpro64:/mnt$ uname -a Linux rockpro64 4.4.132-1075-rockchip-ayufan-ga83beded8524 #1 SMP Thu Jul 26 08:22:22 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux lspci rock64@rockpro64:/mnt$ sudo lspci -vvv [sudo] password for rock64: 00:00.0 PCI bridge: Rockchip Inc. RK3399 PCI Express Root Port Device 0100 (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort+ >SERR+ <PERR+ INTx- Latency: 0 Interrupt: pin A routed to IRQ 238 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff Memory behind bridge: fa000000-fa0fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME+ Capabilities: [90] MSI: Enable+ Count=1/1 Maskable+ 64bit+ Address: 00000000fee30040 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [b0] MSI-X: Enable- Count=1 Masked- Vector table: BAR=0 offset=00000000 PBA: BAR=0 offset=00000008 Capabilities: [c0] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L1, Exit Latency L0s <256ns, L1 <8us ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt+ AutBWInt+ LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power+ Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Via message ARIFwd+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [274 v1] Transaction Processing Hints Interrupt vector mode supported Device specific mode supported Steering table in TPH capability structure Kernel driver in use: pcieport 01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 (prog-if 02 [NVM Express]) Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 237 Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [b0] MSI-X: Enable+ Count=8 Masked- Vector table: BAR=0 offset=00003000 PBA: BAR=0 offset=00002000 Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [148 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [158 v1] Power Budgeting <?> Capabilities: [168 v1] #19 Capabilities: [188 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Capabilities: [190 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=10us PortTPowerOnTime=10us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=0us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us Kernel driver in use: nvme Da sieht alles gut aus. x4 alles Bestens! iozone rock64@rockpro64:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Iozone: Performance Test of File I/O Version $Revision: 3.429 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa. Run began: Sat Oct 20 10:08:28 2018 Include fsync in write timing O_DIRECT feature enabled Auto Mode File size set to 102400 kB Record Size 4 kB Record Size 16 kB Record Size 512 kB Record Size 1024 kB Record Size 16384 kB Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 63896 108269 91858 95309 32845 73173 102400 16 123393 236653 273766 275807 118450 199130 102400 512 471775 570571 484612 496942 441345 575817 102400 1024 544229 642558 508895 511834 486506 647765 102400 16384 1044520 1100322 1069825 1092146 1089301 1086757 iozone test complete. Das sieht nicht optimal aus, schau ich mir später an. Das hier soll nur ein kurzer Test sein ob das Board rennt Nachdem ich mittlerweile zwei ROCKPro64 im "produktiven" Einsatz habe, war es immer sehr mühsam mal eben was zu testen. Man will die anderen ja nicht immer ausmachen, dran rumhantieren usw. Deswegen jetzt der dritte, der im Moment dann die Rolle des Testkandidaten einnimmt. Ab sofort kann ich wieder nach Lust und Laune, neue Images testen usw.
  • Tehuti Networks Ltd. TN9710P 10GBase-T/NBASE-T Ethernet Adapter

    Hardware hardware rockpro64
    2
    0 Stimmen
    2 Beiträge
    1k Aufrufe
    FrankMF
    This repo contains the tn40xx Linux driver for 10Gbit NICs based on the TN4010 MAC from Tehuti Networks. This driver enables the following 10Gb SFP+ NICs: D-Link DXE-810S Edimax EN-9320SFP+ StarTech PEX10000SFP Synology E10G15-F1 ... as well as the following 10GBase-T/NBASE-T NICs: D-Link DXE-810T Edimax EN-9320TX-E EXSYS EX-6061-2 Intellinet 507950 StarTech ST10GSPEXNB Quelle: https://github.com/ayufan-rock64/tn40xx-driver/tree/master
  • USB 3.0 - SATA Adapter

    Hardware hardware rockpro64
    2
    3
    0 Stimmen
    2 Beiträge
    819 Aufrufe
    FrankMF
    Heute das Ganze mal mit einer Samsung 860 Pro mit 256GB. Eingesetztes Filesystem ext4 rock64@rockpro64v2_1:/mnt$ uname -a Linux rockpro64v2_1 4.4.132-1077-rockchip-ayufan-gbaf35a9343cb #1 SMP Mon Jul 30 14:06:57 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux Speedtest rock64@rockpro64v2_1:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Iozone: Performance Test of File I/O Version $Revision: 3.429 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa. Run began: Tue Jul 31 14:27:17 2018 Include fsync in write timing O_DIRECT feature enabled Auto Mode File size set to 102400 kB Record Size 4 kB Record Size 16 kB Record Size 512 kB Record Size 1024 kB Record Size 16384 kB Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 17896 23350 30390 31362 21611 14611 102400 16 56756 59180 86296 93819 51778 57327 102400 512 201347 221961 220840 222338 210887 230781 102400 1024 253752 273695 263884 266256 250153 273528 102400 16384 351112 356007 366417 372264 368721 356177 iozone test complete. DD Schreiben rock64@rockpro64v2_1:/mnt$ sudo dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync 4096+0 records in 4096+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 12.8358 s, 335 MB/s Lesen rock64@rockpro64v2_1:/mnt$ sudo dd if=sd.img of=/dev/null bs=1M count=4096 4096+0 records in 4096+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 11.4787 s, 374 MB/s Fazit Damit scheint der Adapter ganz gut am USB3.0 zu funktionieren. Die Schreibgeschwindigkeit ist ca. dreimal höher als mit der anderen SSD.
  • Neue Bilder

    ROCKPro64 rockpro64
    1
    2
    0 Stimmen
    1 Beiträge
    707 Aufrufe
    Niemand hat geantwortet