VisionFive2 - Benchmarks

[FrankM]

Auf dem VF2 Debian-69 erstellt.

Crucial P3 PCIe SSD mit 500GB

root@starfive:/media/nvme# dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 24.5752 s, 175 MB/s

Samsung SSD T5 am USB3

root@starfive:/media/T5# dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 24.5468 s, 175 MB/s

SD-Karte

root@starfive:/# dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 215.98 s, 19.9 MB/s

Die SD-Karte ist enttäuschend. Da stimmt was nicht mit der Software. Das müsste deutlich schneller gehen.

Für 64 GB: Bis zu 170 MB/s Lesegeschwindigkeit. Proprietäre Technologie ermöglicht bei Verwendung entsprechend leistungsfähiger kompatibler Geräte höhere Geschwindigkeiten als die 104 MB/s von UHS-I. Bis zu 80 MB/s Schreibgeschwindigkeit. Quelle: https://www.westerndigital.com/de-de/products/memory-cards/sandisk-extreme-uhs-i-microsd#SDSQXAH-064G-GN6MA

LAN-Schnittstelle 1000M

root@starfive:~# iperf3 -c 192.168.3.213
Connecting to host 192.168.3.213, port 5201
[  5] local 192.168.4.24 port 33264 connected to 192.168.3.213 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   103 MBytes   861 Mbits/sec  121    296 KBytes       
[  5]   1.00-2.00   sec   112 MBytes   937 Mbits/sec  150    110 KBytes       
[  5]   2.00-3.00   sec   112 MBytes   939 Mbits/sec  179    129 KBytes       
[  5]   3.00-4.00   sec   112 MBytes   941 Mbits/sec  150    116 KBytes       
[  5]   4.00-5.00   sec   111 MBytes   937 Mbits/sec  140    341 KBytes       
[  5]   5.00-6.00   sec   112 MBytes   937 Mbits/sec  150    276 KBytes       
[  5]   6.00-7.00   sec   112 MBytes   942 Mbits/sec  160    170 KBytes       
[  5]   7.00-8.00   sec   112 MBytes   939 Mbits/sec  140    164 KBytes       
[  5]   8.00-9.00   sec   112 MBytes   938 Mbits/sec  160    290 KBytes       
[  5]   9.00-10.00  sec   112 MBytes   939 Mbits/sec  140    188 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.08 GBytes   931 Mbits/sec  1490             sender
[  5]   0.00-10.00  sec  1.08 GBytes   930 Mbits/sec                  receiver

iperf Done.
root@starfive:~# iperf3 -R -c 192.168.3.213
Connecting to host 192.168.3.213, port 5201
Reverse mode, remote host 192.168.3.213 is sending
[  5] local 192.168.4.24 port 33268 connected to 192.168.3.213 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec   105 MBytes   883 Mbits/sec                  
[  5]   1.00-2.00   sec   112 MBytes   939 Mbits/sec                  
[  5]   2.00-3.00   sec   112 MBytes   939 Mbits/sec                  
[  5]   3.00-4.00   sec   112 MBytes   939 Mbits/sec                  
[  5]   4.00-5.00   sec   112 MBytes   939 Mbits/sec                  
[  5]   5.00-6.00   sec  83.8 MBytes   703 Mbits/sec                  
[  5]   6.00-7.00   sec   112 MBytes   939 Mbits/sec                  
[  5]   7.00-8.00   sec   112 MBytes   939 Mbits/sec                  
[  5]   8.00-9.00   sec   112 MBytes   939 Mbits/sec                  
[  5]   9.00-10.00  sec   112 MBytes   939 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.06 GBytes   912 Mbits/sec  203             sender
[  5]   0.00-10.00  sec  1.06 GBytes   910 Mbits/sec                  receiver

iperf Done.