Skip to content

Kernel 4.4.x

Angeheftet Images
45 1 4.6k
  • 4.4.154-1134-rockchip-ayufan released

    ayufan: rockpro64: enable uart0 for bt

    PCIe & WiFi-Modul geht immer noch nicht. Aber, Kamil hat einen neuen Release angeschmissen.

  • 4.4.167-1138-rockchip-ayufan released

    ayufan: defconfig: disable broken kernel modules

  • 4.4.167-1140-rockchip-ayufan released

    ayufan: stmmac: disable TX offload for mtu bigger than 1498

    Zum Thema bitte auch diesen Beitrag lesen.

    • 4.4.167-1146-rockchip-ayufan
    • 4.4.167-1148-rockchip-ayufan
    • 4.4.167-1151-rockchip-ayufan
    • 4.4.167-1153-rockchip-ayufan

    Änderungen:

    • ayufan: rockchip-vpu: fix compilation errors
    • ayufan: dts: rockpro64: fix es8316 support
    • ayufan: dts: rockpro64: add missing gpu_power_model for MALI
    • ayufan: dts: pinebook-pro: fix support for sound-out

    Ayufan bereitet die Images für das kommende Pinbook Pro vor.

    • 4.4.167-1155-rockchip-ayufan
    • 4.4.167-1157-rockchip-ayufan
    • 4.4.167-1159-rockchip-ayufan
    • 4.4.167-1161-rockchip-ayufan

    Änderungen

    • ayufan: dts: pinebook-pro: change bt/audio supply according to Android changes
    • ayufan: dts: rock64: remove unused ir-receiver
    • ayufan: dts: pinebook-pro: fix display port output
    • ayufan: dts: pinebook-pro: fix display port output
  • 4.4.167-1165-rockchip-ayufan released

    • ayufan: dts: rockpro64: enable 1.992GHz OPP
  • 4.4.167-1167-rockchip-ayufan released

    • ayufan: dts: pinebook-pro: fix eDP resolution
  • 4.4.167-1169-rockchip-ayufan released

    • nuumio: dts/c: rockpro64: add pcie scan sleep and enable it for rockpro64 (#45)

  • 4.4.167-1171-rockchip-ayufan released
    4.4.167-1173-rockchip-ayufan released

    • ayufan: dts: rockpro64: configure dmc/dfi
    • ayufan: dts: rockpro64: reconfigure OPPs for cpul/b
  • 4.4.167-1175-rockchip-ayufan released

    • Old driver is rockchip-drm-rga

  • 4.4.167-1178-rockchip-ayufan released
    4.4.167-1181-rockchip-ayufan released

    • ayufan: defconfig: enable CONFIG_ROCKCHIP_RGA2
    • ayufan: dts: rockpro64: enable 32MB ion
  • 4.4.167-1183-rockchip-ayufan released

    • ayufan: dts: rock64: limit DDR to 1600MHz
  • 4.4.167-1184-rockchip-ayufan released
    4.4.167-1185-rockchip-ayufan released

    • Revert "PCI: rockchip: Add Rockchip DW PCIe controller support"
    • Revert "nuumio: dts/c: rockpro64: add pcie scan sleep and enable it for rockpro64 (#45)"

    und viele andere Änderungen. https://gitlab.com/ayufan-repos/rock64/linux-kernel/commits/release-4.4

  • 4.4.167-1187-rockchip-ayufan released

    • ayufan: defconfig: enable CONFIG_PHY_ROCKCHIP_PCIE=y

    Dran denken, Kamil ist im Moment ziemlich viel am Umbauen. Könnte also gut sein, das hinterher weniger funktioniert als vorher. Also schön vorsichtig 😉

  • 4.4.167-1188-rockchip-ayufan released

    • ayufan: dts: rock64: fix vcc_host1_5v to be active_low
  • 4.4.167-1189-rockchip-ayufan released

    • ayufan: dts: rockpro64: fix xin32k

    Irgendwas mit clock und WLan..

  • 4.4.167-1192-rockchip-ayufan released

    • ayufan: rockchip: pwm_remotectl: fix pinctrl not being set
    • ayufan: stmmac: fix suspend/resume of gmac raising DMA error

    Kamil schrieb was von IR gefixt und suspend/resume !?

  • 4.4.167-1193-rockchip-ayufan released

    • ayufan: dts: rockpro64: remove unused i2s0 as it blocks spdif
  • 4.4.167-1201-rockchip-ayufan released

    Ganz schön aktiv unser Kamil im Moment. 🙂

    Hier zum Nachlesen -> https://gitlab.com/ayufan-repos/rock64/linux-kernel/commits/release-4.4

  • 4.4.167-1211-rockchip-ayufan released

    Kamil war die letzten Tage sehr fleißig 🙂 Viele verschiedene Änderungen, bitte hier nachlesen.

  • [V] RockPro64 V2.1

    Frank's Resterampe rockpro64 verkauf
    1
    1
    0 Stimmen
    1 Beiträge
    166 Aufrufe
    Niemand hat geantwortet
  • NVMe - Booten jetzt möglich

    Angeheftet ROCKPro64 rockpro64
    7
    0 Stimmen
    7 Beiträge
    884 Aufrufe
    FrankMF
    Hallo @mabs, ja. Der uboot wird in den SPI Speicher geladen. Der sucht dann beim Starten nach einem bootfähigem Device. So wie auf einem ganz normalen PC. Eine richtig coole Sache, wo ich mich freue, das das langsam mal funktioniert. Die Performance wird ja dann sicherlich von dem Device bestimmt. Dazu gibt es ja genug Messungen. Ich würde eine NVMe SSD immer einer SATA Platte vorziehen. Es kommt aber auf den Anwendungsfall an. Für ein NAS dann eher zwei oder mehr SATA Platten, und von USB3 HDD booten So wie ich das schon lange betreibe. Aber, da hat auch jeder andere Vorstellungen und Vorlieben für.
  • Mainline 4.20.0-rc6

    ROCKPro64 rockpro64
    1
    0 Stimmen
    1 Beiträge
    450 Aufrufe
    Niemand hat geantwortet
  • Video PCIe SATA Karte

    ROCKPro64 rockpro64
    1
    0 Stimmen
    1 Beiträge
    539 Aufrufe
    Niemand hat geantwortet
  • USB 3.0 - SATA Adapter

    Hardware hardware rockpro64
    2
    3
    0 Stimmen
    2 Beiträge
    827 Aufrufe
    FrankMF
    Heute das Ganze mal mit einer Samsung 860 Pro mit 256GB. Eingesetztes Filesystem ext4 rock64@rockpro64v2_1:/mnt$ uname -a Linux rockpro64v2_1 4.4.132-1077-rockchip-ayufan-gbaf35a9343cb #1 SMP Mon Jul 30 14:06:57 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux Speedtest rock64@rockpro64v2_1:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Iozone: Performance Test of File I/O Version $Revision: 3.429 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa. Run began: Tue Jul 31 14:27:17 2018 Include fsync in write timing O_DIRECT feature enabled Auto Mode File size set to 102400 kB Record Size 4 kB Record Size 16 kB Record Size 512 kB Record Size 1024 kB Record Size 16384 kB Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 17896 23350 30390 31362 21611 14611 102400 16 56756 59180 86296 93819 51778 57327 102400 512 201347 221961 220840 222338 210887 230781 102400 1024 253752 273695 263884 266256 250153 273528 102400 16384 351112 356007 366417 372264 368721 356177 iozone test complete. DD Schreiben rock64@rockpro64v2_1:/mnt$ sudo dd if=/dev/zero of=sd.img bs=1M count=4096 conv=fdatasync 4096+0 records in 4096+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 12.8358 s, 335 MB/s Lesen rock64@rockpro64v2_1:/mnt$ sudo dd if=sd.img of=/dev/null bs=1M count=4096 4096+0 records in 4096+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 11.4787 s, 374 MB/s Fazit Damit scheint der Adapter ganz gut am USB3.0 zu funktionieren. Die Schreibgeschwindigkeit ist ca. dreimal höher als mit der anderen SSD.
  • Image 0.6.57 - NVMe paar Notizen

    Verschoben Archiv rockpro64
    1
    0 Stimmen
    1 Beiträge
    693 Aufrufe
    Niemand hat geantwortet
  • ROCKPro64 - Der Bootvorgang

    Verschoben Hardware hardware rockpro64
    3
    0 Stimmen
    3 Beiträge
    2k Aufrufe
    FrankMF
    Um einen neuen Kernel booten zu können, brauche ich diese 4 Dateien unter /boot config-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 initrd.img-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 System.map-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 vmlinuz-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 Und den Ordner /boot/dtbs/4.19.0-rc4-1065-ayufan-g72e04c7b3e06 mit folgendem Inhalt rock64@rockpro64v2_0:/boot/dtbs/4.19.0-rc4-1065-ayufan-g72e04c7b3e06$ ls -la total 104 drwxr-xr-x 26 root root 4096 Sep 30 09:54 . drwxr-xr-x 6 root root 4096 Sep 30 09:55 .. drwxr-xr-x 2 root root 4096 Sep 30 09:54 al drwxr-xr-x 2 root root 4096 Sep 30 09:54 allwinner drwxr-xr-x 2 root root 4096 Sep 30 09:54 altera drwxr-xr-x 2 root root 4096 Sep 30 09:54 amd drwxr-xr-x 2 root root 4096 Sep 30 09:54 amlogic drwxr-xr-x 2 root root 4096 Sep 30 09:54 apm drwxr-xr-x 2 root root 4096 Sep 30 09:54 arm drwxr-xr-x 4 root root 4096 Sep 30 09:54 broadcom drwxr-xr-x 2 root root 4096 Sep 30 09:54 cavium drwxr-xr-x 2 root root 4096 Sep 30 09:54 exynos drwxr-xr-x 2 root root 4096 Sep 30 09:54 freescale drwxr-xr-x 2 root root 4096 Sep 30 09:54 hisilicon drwxr-xr-x 2 root root 4096 Sep 30 09:54 lg drwxr-xr-x 2 root root 4096 Sep 30 09:54 marvell drwxr-xr-x 2 root root 4096 Sep 30 09:54 mediatek drwxr-xr-x 2 root root 4096 Sep 30 09:54 nvidia drwxr-xr-x 2 root root 4096 Sep 30 09:54 qcom drwxr-xr-x 2 root root 4096 Sep 30 09:54 renesas drwxr-xr-x 2 root root 4096 Sep 30 09:54 rockchip drwxr-xr-x 2 root root 4096 Sep 30 09:54 socionext drwxr-xr-x 2 root root 4096 Sep 30 09:54 sprd drwxr-xr-x 2 root root 4096 Sep 30 09:54 synaptics drwxr-xr-x 2 root root 4096 Sep 30 09:54 xilinx drwxr-xr-x 2 root root 4096 Sep 30 09:54 zte Unter /boot/extlinux liegt dann die Datei extlinux.conf Die sieht bei mir dann so aus timeout 10 menu title select kernel label kernel-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 kernel /boot/vmlinuz-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 initrd /boot/initrd.img-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 devicetreedir /boot/dtbs/4.19.0-rc4-1065-ayufan-g72e04c7b3e06 append rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=${ethaddr} eth1addr=${eth1addr} serial=${serial#} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=TEST rootwait rootfstype=ext4 label kernel-4.19.0-rc4-1065-ayufan-g72e04c7b3e06-memtest kernel /boot/vmlinuz-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 initrd /boot/initrd.img-4.19.0-rc4-1065-ayufan-g72e04c7b3e06 devicetreedir /boot/dtbs/4.19.0-rc4-1065-ayufan-g72e04c7b3e06 append rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=${ethaddr} eth1addr=${eth1addr} serial=${serial#} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=TEST rootwait rootfstype=ext4 memtest Darunter kommen dann evt. die alten Kernel die installiert waren, das habe ich hier im Beispiel weg gelassen.
  • Images 0.6.x

    Verschoben Images rockpro64
    30
    0 Stimmen
    30 Beiträge
    7k Aufrufe
    FrankMF
    0.6.60 released 0.6.60: Fix pcie/nvme/sata support for 4.4, 0.6.60: Fix spi-flash access for 4.4/mainline, Ich bin davon ausgegangen, das 0.6.x nict mehr fortgeführt wird, okay - sieht nicht so aus. Sollte released werden, ist aber aus irgendeinem Grund gestern nicht passiert (lt. Kamil)