Skip to content

Release Empfehlung für Einsteiger

Moved Archiv
2 1 1.3k
  • Bei den ganzen Releases und Pre-Releases kann man ja völlig den Überblick verlieren, deswegen hier eine kurze Anleitung für Einsteiger.

    Schritt 1

    Derzeit funktioniert der Bootvorgang mit SD-Karte einwandfrei, eMMC-Karte soll funktionieren! (ich habe aktuell keine). Am einfachsten für Einsteiger ist es eine SD-Karte zu beschreiben.

    Schritt 2

    Die Installation auf den Mainline-Kernel upgraden

    Eine Anleitung dazu findet ihr hier.

    Aktuell sehr stabile Version ist die

    rock64@rockpro64:~$ uname -a
    Linux rockpro64 4.18.0-rc3-1042-ayufan-gc1c3de67a7c1 #1 SMP PREEMPT Wed Jul 4 20:17:49 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux
    

    Ich werde versuchen, das hier recht aktuell zu halten!

  • Sieht so aus, als wenn wir ein neues Traumpaar haben. 🙂

    0.7.7

    und

    rock64@rockpro64:/mnt$ uname -a
    Linux rockpro64 4.18.0-rc3-1046-ayufan-ge76778b6aa4b #1 SMP PREEMPT Thu Jul 19 14:10:17 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux
    
  • Mainline 5.13.x

    Images linux rockpro64
    1
    0 Votes
    1 Posts
    246 Views
    No one has replied
  • Armbian 20.08 (Caple) released

    Armbian armbian rockpro64
    1
    0 Votes
    1 Posts
    398 Views
    No one has replied
  • Armbian 5.4.0-rc1

    Armbian armbian rockpro64
    5
    4
    0 Votes
    5 Posts
    464 Views
    FrankMF
    Gut, ich bin nicht der einzige, der ständig damit Probleme hat. @tkaiser auch [image: 1578061215343-1036201d-a4b2-47be-a618-36003c07e0ce-grafik.png]
  • ROCKPro64 - Alter u-boot im SPI-Flash

    ROCKPro64 rockpro64
    1
    0 Votes
    1 Posts
    541 Views
    No one has replied
  • SATA Karte Marvell 88SE9230 Chipsatz

    Pinned Hardware hardware rockpro64
    19
    0 Votes
    19 Posts
    6k Views
    FrankMF
    Ok, es gibt noch eine andere Möglichkeit. Kamil hat mir noch ein wenig geholfen. Mit folgender Änderung werden die Platten gefunden. hmm, I had to add /etc/default/extlinux: libahci.skip_host_reset=1 Sieht dann so aus. # Configure timeout to choose the kernel # TIMEOUT="10" # Configure default kernel to boot: check all kernels in `/boot/extlinux/extlinux.conf` # DEFAULT="kernel-4.4.126-rockchip-ayufan-253" # Configure additional kernel configuration options APPEND="$APPEND root=LABEL=linux-root rootwait rootfstype=ext4 libahci.skip_host_reset=1" Danach waren die Platten zu sehen. root@rockpro64:/tmp/etc/default# blkid /dev/sda2: SEC_TYPE="msdos" LABEL_FATBOOT="boot-efi" LABEL="boot-efi" UUID="ABCD-FC7D" TYPE="vfat" PARTLABEL="boot_efi" PARTUUID="72e36967-4050-4bb3-8f8f-bf6755c38f28" /dev/sda3: LABEL="linux-boot" UUID="8e289a3e-0f9b-4da1-a147-51e03390637c" TYPE="ext4" PARTLABEL="linux_boot" PARTUUID="fe944fd2-3e42-4202-8a95-656e9bdb4be6" /dev/sda4: LABEL="linux-root" UUID="3e9513c6-dfd1-48c9-bee2-04bb5a153056" TYPE="ext4" PARTLABEL="linux_root" PARTUUID="d2d1dd88-030d-4f74-998f-7c9ce7d385d0" /dev/sdb2: SEC_TYPE="msdos" LABEL_FATBOOT="boot-efi" LABEL="boot-efi" UUID="56C9-F745" TYPE="vfat" PARTLABEL="boot_efi" PARTUUID="919c8f73-5f25-4a01-9072-3a5ed9a88ff2" /dev/sdb3: LABEL="linux-boot" UUID="23c19647-f4a1-4197-a877-f1bb03456bef" TYPE="ext4" PARTLABEL="linux_boot" PARTUUID="093d0cc0-d122-4dce-aeb5-4e266b4b7d9d" /dev/sdb4: LABEL="linux-root" UUID="f1c74331-8318-4ee8-a4f7-f0c169fb9944" TYPE="ext4" PARTLABEL="linux_root" PARTUUID="964ab457-58d5-40c4-bb02-dfd37bd2f0da" /dev/sda1: PARTLABEL="loader1" PARTUUID="37466429-e4a4-495c-b9a1-3f74625a3cae" /dev/sdb1: PARTLABEL="loader1" PARTUUID="33f692b3-54cb-4a37-b602-21a2baf32fa0" Aber auch hiermit ist ein Boot von der SATA Platte nicht möglich. Ich möchte hier noch was vom kamil zitieren. (11:44:09) ayufanWithPM: will look later, but this controller is tricky, also on x86 as well (11:44:16) ayufanWithPM: jms585 seems to be significantly more stable Evt. bekommt er das gefixt
  • ROCKPro64 - kein WLan-Modul möglich?

    ROCKPro64 rockpro64
    4
    2
    0 Votes
    4 Posts
    2k Views
    FrankMF
    Heute, 5 Monate später, kann ich bestätigen das WLan möglich ist Getestet auf einem ROCKPro64 v2.1 mit 2GB RAM. Eine Vorabversion von Recalbox machte es das erste Mal für mich möglich das WLan zu benutzen. Bericht Und PCIe ist abgeschaltet im dts File. pcie-phy { compatible = "rockchip,rk3399-pcie-phy"; #phy-cells = <0x0>; rockchip,grf = <0x15>; clocks = <0x8 0x8a>; clock-names = "refclk"; resets = <0x8 0x87>; reset-names = "phy"; status = "disabled"; phandle = <0x8b>; }; pcie@f8000000 { compatible = "rockchip,rk3399-pcie"; #address-cells = <0x3>; #size-cells = <0x2>; aspm-no-l0s; clocks = <0x8 0xc5 0x8 0xc4 0x8 0x147 0x8 0xa0>; clock-names = "aclk", "aclk-perf", "hclk", "pm"; bus-range = <0x0 0x1f>; max-link-speed = <0x2>; linux,pci-domain = <0x0>; msi-map = <0x0 0x89 0x0 0x1000>; interrupts = <0x0 0x31 0x4 0x0 0x0 0x32 0x4 0x0 0x0 0x33 0x4 0x0>; interrupt-names = "sys", "legacy", "client"; #interrupt-cells = <0x1>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 0x8a 0x0 0x0 0x0 0x0 0x2 0x8a 0x1 0x0 0x0 0x0 0x3 0x8a 0x2 0x0 0x0 0x0 0x4 0x8a 0x3>; phys = <0x8b>; phy-names = "pcie-phy"; ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; reg = <0x0 0xf8000000 0x0 0x2000000 0x0 0xfd000000 0x0 0x1000000>; reg-names = "axi-base", "apb-base"; resets = <0x8 0x82 0x8 0x83 0x8 0x84 0x8 0x85 0x8 0x86 0x8 0x81 0x8 0x80>; reset-names = "core", "mgmt", "mgmt-sticky", "pipe", "pm", "pclk", "aclk"; status = "disabled"; Also bleibt weiterhin ungeklärt, ob auch beides zusammen möglich ist. Also gleichzeitig das WLan-Modul und eine PCIe Karte.
  • ROCKPro64 - Schaltplan v2.1 veröffentlicht

    ROCKPro64 rockpro64
    1
    0 Votes
    1 Posts
    912 Views
    No one has replied
  • 0 Votes
    2 Posts
    889 Views
    FrankMF
    Offizielle Bestätigung -> http://files.pine64.org