Say Hello to the World's Largest Hard Drive, a Massive 36TB Seagate
Technology
252
Beiträge
155
Kommentatoren
12
Aufrufe
-
What models of Seagate drives?
I've been running x4 Seagate ST8000NC0002s 24/7 for almost 5 years, plus 2 more I added about 6 months ago and they've never given me any trouble.
To be fair, the only HDDs I've ever had that failed were two I dropped because I wasn't being careful enough.
All over the map: Barracuda, SkyHawk, Ironwolf, Constellation, Cheetah, etc...
-
This post did not contain any content.
I'm gonna need like 6 of these
-
Can someone recommend me a hard drive that won't fail immediately? Internal, not SSD, from which cheap ones will die even sooner, and I need it for archival reasons, not speed or fancy new tech, otherwise I have two SSDs.
My WD Red Pros have almost all lasted me 7+ years but the best thing (and probably cheapest nowadays) is a proper 3-2-1 backup plan.
-
Hard drives aren't great for archival in general, but any modern drive should work. Grab multiple brands and make at least two copies. Look for sales. Externals regularly go below $15/tb these days.
Word for the wise, those externals usually won't last 5+ years of constant use as an internal.
-
they were selling wd red (pro?) drives with smr tech, which is known to be disastrous for disk arrays because both traditional raid and zfs tends to throw them out. the reason for that is when you are filling it up, especially when you do it quickly, it won't be able to process your writes after some time, and write operations will take a very long time, because the disk needs to rearrange its data before writing more. but raid solutions just see that the drive is not responding to the write command for a long time, and they think that's because the drive is bad.
it was a few years ago, but it was a shitfest because they didn't disclose it, and people were expecting that nas drives will work fine in their nas.
I've had a couple random drop from my array recently, but they were older so I didn't think twice about it. Does this permafry them or can you remove from the array and reinitiate for it to work?
-
A lot of modern AAA games require an SSD, actually.
On top of my head:
Cyberpunk, Marvel's Spider-Man 2, Hogwarts Legacy, Dead Space remake, Starfield, Baulder's Gate 3, Palworld, Ratchet & Clank: Rift ApartCyberpunk literally has an HDD mode, I play it of an HDD every day.
With sufficient ram to load everything in you'll just have longer load times, no hdd hitchiness
-
Makes me shudder. I have to replace a drive in my array, because it is degraded. It's a 4TB. Imagine having to replace one of these. I'd much rather have a bunch of cheaper drives, even if they are a bit more expensive per TB, because the replacement cost will eventually make the total cost of ownership lower.
Also, repeat with me: "Please give me a Toshiba or Hitachi, please"
Until you run out of ports or cage space
-
This post did not contain any content.
That's a lot of porn. And possibly other stuff, too.
-
Word for the wise, those externals usually won't last 5+ years of constant use as an internal.
I've got 6 in a random mix of brands (Seagate and WD) 8-16Tb that are all older than that. Running 24/7 storing mostly random shit I download. Pulled one out recently because the USB controller died. Still works in a different enclosure now.
I'd definitely have a different setup for data I actually cared about.
-
36 Typical Bananas
28 plantains
-
That's a lot of porn. And possibly other stuff, too.
It isn't as much as you think, high resolution, high bitrate video files are pretty large.
-
If you're relying on one hard drive not failing to preserve your data you are doing it wrong from the jump. I've got about a dozen hard drives in play from seagate and WD at any given time (mostly seagate because they're cheaper and I don't need speed either) and haven't had a failure yet. Backblaze used to publish stats about the hard drives they use, not sure if they still do but that would give you some data to go off. Seagate did put out some duds a while back but other models are fine.
The back blaze stats were always useless because they would tell you what failed long after that run of drives was available.
There are only 3 manufactures at this point so just buy one or two of each color and call it a day. ZFS in raid z2 is good enough for most things at this point.
-
That's a lot of porn. And possibly other stuff, too.
And possibly other stuff, too.
Ehhh don't test me
-
I'm gonna need like 6 of these
monkey's paw curls They're SMR
-
This post did not contain any content.
Is it worth replacing within a year only to be sent a refurbished when it dies?
-
That's not how computers work, but sure bro.
Okay well try telling that to my computer when the games wouldn't run without constantly freezing to load assets every few seconds.
-
In my case, 10+years ago I had 6 * 3tb Seagate disks in a software raid 5. Two of them failed and it took me days to force it back into the raid and get some of the data off. Now I use WD and raid 6.
I read 3 or 4 years ago that it was just the 3tb reds I used had a high failure rate but I'm still only buying WDs
I had a single red 2TB in an old tivo roamio for almost a decade.
Pulled out this weekend, and finally tested it. Failed.
I was planning to move my 1.5T music collection to it. Glad I tested it first, lol.
-
Do people actually use such massive hard drives? I still have my 1 TB HDD in my PC (and a 512 GB SSD), lol.
I have just shy of 8TB of data on my home file server.
That's not including my NVR (for security cameras) which has a single 6TB SATA drive sitting around 40% capacity.
-
Elaborate please?
what's behind the infamous Seagate BSY bug? - Page 1
what's behind the infamous Seagate BSY bug? - Page 1
(www.eevblog.com)
this thread has multiple documented instances of poor QA and firmware bugs Seagate has implemented at the cost of their own customers.
my specific issue was even longer ago, 20+ years. there was a bug in the firmware where there was a buffer overflow from an int limit on runtime. it caused a cascade failure in the firmware and caused the drive to lock up after it ran for the maximum into limit. this is my understanding of it anyway.
the only solution was to purchase a board online for the exact model of your HDD and swap it and perform a firmware flash before time ran out. I think you could also use a clip and force program the firmware.
at the time a new board cost as much as a new drive, finances of which I didn't have at the time.
eventually I moved past the 1tb of data I lost, but I will never willingly purchase another Seagate.
-
monkey's paw curls They're SMR
Seems fine with a couple TB of SSDs to act as active storage with regular rsyncs back to the HDDs. This is fine.
-
-
-
‘I sold my iris; now what?’: What drives Brazilians to hand over their unique, personal data
Technology
1
-
-
30% of South Korean schools have adopted AI-powered digital textbooks since the country's education ministry began a full-scale rollout in March 2025
Technology
1
-
“No Apple tax means we will lower prices” - Proton announces lower prices for users by up to 30% after US ruling against Apple fees
Technology
1
-
-
