Skip to content

Study: Remote working benefits fathers while childless men miss sense of community

Technology
98 74 0
  • 119 Stimmen
    10 Beiträge
    3 Aufrufe
    S
    Active ISA would be a disaster. My fairly modern car is unable to reliably detect posted or implied speed limits. Sometimes it overshoots by more than double and sometimes it mandates more than 3/4 slower. The problem is the way it is and will have to be done is by means of optical detection. GPS speed measurement can also be surprisingly unreliable. Especially in underground settings like long pass-unders and tunnels. If the system would be based on something reliable like local wireless communications between speed limit postings it would be a different issue - would also come with a significant risc of abuse though. Also the passive ISA was the first thing I disabled. And I abide by posted speed limits.
  • Welcome to the web we lost

    Technology technology
    22
    1
    181 Stimmen
    22 Beiträge
    5 Aufrufe
    C
    Is it though? Its always far easier to be loud and obnoxious than do something constructive, even with the internet and LLMs, in fact those things are amplifiers which if anything make the attention imbalance even more drastic and unrepresentative of actual human behaviour. In the time it takes me to write this comment some troll can write a dozen hateful ones, or a bot can write a thousand. Doesn't mean humans are shitty in a 1000/1 ratio, just means shitty people can now be a thousand times louder.
  • 110 Stimmen
    84 Beiträge
    10 Aufrufe
    T
    It's not new technology you numpty. It's not news. It's not a scientific paper. Wireless energy transfer isn't "bullshit", it's been an understood aspect of physics for a long time. Since you seem unable to grasp the concept, I'll put it in bold and italics: This is a video of a guy doing a DIY project where he wanted to make his setup as wireless as possible. In the video he also goes over his thoughts and design considerations, and explains how the tech works for people who don't already know. It is not new technology. It is not pseudoscience. It is a guy showing off his bespoke PC setup. It does not need an article or a blog post. He can post about it in any form he wants. Personally, I think showcasing this kind of thing in a video is much better than a wall of text. I want to see the process, the finished product, the tools used and how he used them.
  • 463 Stimmen
    94 Beiträge
    2 Aufrufe
    L
    Make them publishers or whatever is required to have it be a legal requirement, have them ban people who share false information. The law doesn't magically make open discussions not open. By design, social media is open. If discussion from the public is closed, then it's no longer social media. ban people who share false information Banning people doesn't stop falsehoods. It's a broken solution promoting a false assurance. Authorities are still fallible & risk banning over unpopular/debatable expressions that may turn out true. There was unpopular dissent over covid lockdown policies in the US despite some dramatic differences with EU policies. Pro-palestinian protests get cracked down. Authorities are vulnerable to biases & swayed. Moreover, when people can just share their falsehoods offline, attempting to ban them online is hard to justify. If print media, through its decline, is being held legally responsible Print media is a controlled medium that controls it writers & approves everything before printing. It has a prepared, coordinated message. They can & do print books full of falsehoods if they want. Social media is open communication where anyone in the entire public can freely post anything before it is revoked. They aren't claiming to spread the truth, merely to enable communication.
  • 221 Stimmen
    99 Beiträge
    10 Aufrufe
    G
    In highrises with lots of stops and users, it uses some more advanced software to schedule the optimal stops, or distribute the load between multiple lifts. A similar concept exists for HDD controllers, where the read write arm must move to different positions to load data stored on different plates and sectors, and Repositioning the head is a slow and expensive process that cuts down the data transfer rate.
  • 1 Stimmen
    8 Beiträge
    3 Aufrufe
    L
    I think the principle could be applied to scan outside of the machine. It is making requests to 127.0.0.1:{port} - effectively using your computer as a "server" in a sort of reverse-SSRF attack. There's no reason it can't make requests to 10.10.10.1:{port} as well. Of course you'd need to guess the netmask of the network address range first, but this isn't that hard. In fact, if you consider that at least as far as the desktop site goes, most people will be browsing the web behind a standard consumer router left on defaults where it will be the first device in the DHCP range (e.g. 192.168.0.1 or 10.10.10.1), which tends to have a web UI on the LAN interface (port 8080, 80 or 443), then you'd only realistically need to scan a few addresses to determine the network address range. If you want to keep noise even lower, using just 192.168.0.1:80 and 192.168.1.1:80 I'd wager would cover 99% of consumer routers. From there you could assume that it's a /24 netmask and scan IPs to your heart's content. You could do top 10 most common ports type scans and go in-depth on anything you get a result on. I haven't tested this, but I don't see why it wouldn't work, when I was testing 13ft.io - a self-hosted 12ft.io paywall remover, an SSRF flaw like this absolutely let you perform any network request to any LAN address in range.
  • 87 Stimmen
    10 Beiträge
    3 Aufrufe
    T
    If you want to stay on the bleeding edge you've got to be a reversal of Europe, which means allowing innovation and competition. Hence why VT is nearly 70% US.
  • Reddit will tighten verification to keep out human-like AI bots

    Technology technology
    24
    1
    84 Stimmen
    24 Beiträge
    2 Aufrufe
    O
    While I completely agree with you about the absence of one-liners and meme comments, and even more left leaning community, there's still that strong element of "gotcha" in discussions. Also tonnes of people not reading an article before commenting (at a better rate than Reddit probably), and a generally even more doomer attitude is common here.