Skip to content

Zero-day: Bluetooth gap turns millions of headphones into listening stations

Technology
123 88 696
  • The flaws, discovered by German cybersecurity firm ERNW and first reported by Heise Online, affect dozens of headphone models from brands such as Sony, JBL, Bose, and Marshall, with no comprehensive firmware fixes available yet.

    • Sony WH-1000XM4/5/6, WF-1000XM3/4/5, LinkBuds S, ULT Wear, CH-720N, C500, C510-GFP, XB910N
    • Marshall ACTON III, MAJOR V, MINOR IV, MOTIF II, STANMORE III, WOBURN III
    • JBL Live Buds 3, Endurance Race 2
    • Jabra Elite 8 Active
    • Bose QuietComfort Earbuds
    • Beyerdynamic Amiron 300
    • Jlab Epic Air Sport ANC
    • Teufel Airy TWS 2
    • MoerLabs EchoBeatz
    • Xiaomi Redmi Buds 5 Pro
    • earisMax Bluetooth Auracast Sender

    ERNW emphasizes that this is only a partial list.

    Source

    Damn that's pretty big, hopefully they update and give a final list of affected devices. Not to mention, gotta pray the devices will see software updates to try and mitigate it.

  • I mean, there were legitimate technical issues with the standard, especially on smartphones, which is where they really got pushed out. Most other devices do have headphones jacks. If I get a laptop, it's probably got a headphones jack. Radios will have headphones jacks. Get a mixer, it's got a headphones jack. I don't think that the standard is going to vanish anytime soon in general.

    I like headphones jacks. I have a ton of 1/8" and 1/4" devices and headphones that I happily use. But they weren't doing it for no reason.

    • From what I've read, the big, driving one that drove them out on smartphones was that the jack just takes up a lot more physical space in the phone than USB-C or Bluetooth. I'd rather just have a thicker phone, but a lot of people don't, and if you're going all over the phone trying to figure out what to eject to buy more space, that's gonna be a big target. For people who do want a jack on smartphones, which invariably have USB-C, you can get a similar effect to having a headphones jack by just leaving a small USB-C audio interface with a headphones jack on the end of your headphones (one with a passthrough USB-C port if you also want to use a USB-C port for other things).

    • A second issue was that the standard didn't have a way to provide power (there was a now-dead extension from many years back that is now dead, IIRC for MD players, that let a small amount of power be provided with an extra ring). That didn't matter for a long time, as long as your device could put out a strong enough signal to drive headphones of whatever impedance you had. But ANC has started to become popular now, and you need power for ANC. This is really the first time I think that there's a solid reason to want to power headphones.

    • The connection got shorted when plugging things in and out, which could result in loud sound on the membrane.

    • USB-C is designed so that the springy tensioning stuff that's there to keep the connection solid is on the (cheap, easy to replace) cord rather than the (expensive, hard to replace) device; I understand from past reading that this was a major reason that micro-USB replaced mini-USB. Instead of your device wearing out, the cord wears out. Not as much of an issue for headphones as mini-USB, but I think that it's probably fair to say that it's desirable to have the tensioning on the cord side.

    • On USB-C, the right part breaks. One irritation I have with USB-C is that it is...kind of flimsy. Like, it doesn't require that much force pushing on a plug sideways to damage a plug. However --- and I don't know if this was a design goal for USB-C, though I suspect it was --- my experience has been that if that happens, it's the plug on the (cheap, easy to replace) cord that gets damaged, not the device. I have a television with a headphones jack that I destroyed by tripping over a headphones cord once, because the headphones jack was nice and durable and let me tear components inside the television off. I've damaged several USB-C cables, but I've never damaged the device they're connected to while doing so.

    On an interesting note, the standard is extremely old, probably one of the oldest data standards in general use today; the 1/4" mono standard was from phone switchboards in the 1800s.

    EDIT: Also, one other perk of using USB-C instead of a built-in headphones jack on a smartphone is that if the DAC on your phone sucks, going the USB-C-audio-interface route means that you can use a different DAC. Can't really change the internal DAC. I don't know about other people, but last phone I had that did have an audio jack would let through a "wub wub wub" sound when I was charging it on USB off my car's 12V cigarette lighter adapter --- dirty power, but USB power is often really dirty. Was really obnoxious when feeding my car's stereo via its AUX port. That's very much fixable by putting some filtering on the DAC's power supply, maybe needs a capacitor on the thing, but the phone manufacturer didn't do it, maybe to save space or money. That's not something that I can go fix. I eventually worked around it by getting a battery-powered Bluetooth receiver that had a 1/8" headphones jack, cutting the phone's DAC out of the equation. The phone's internal DAC worked fine when the phone wasn't charging, but I wanted to have the phone plugged in for navigation stuff when I was driving.

    Great post, thank you.

  • Sony WH-1000XM4/5/6

    I don't have one of those, but they're pretty popular as headphones with good ANC.

    Jlab Epic Air Sport ANC

    I do have those, though.

    Yeah. I have the previous version of the WH which seems not affected, but I also have the WF 3 which unfortunately seems to be.

    Many people have sony headphones with those chips.

  • The only time a hacker is going to target you like this is if you're an extremely high value target like a CEO or if you're in the crosshairs of a nation-state. The average hacker isn't going to waste this kind of effort to hack someone with $200 in their bank account and no power over anything or anyone.

  • The Bluetooth chipset installed in popular models from major manufacturers is vulnerable. Hackers could use it to initiate calls and eavesdrop on devices.

    Source

    I was hoping this would allow me to take over Bluetooth speakers that people use while skiing and replace their music with a PSA about how no one wants to hear their music

    Most annoying people on the mountain

  • Double post

  • and also why corporations didn't want them.

    Exactly! So they can spy on us more!

    No, the real reason is it saves a few pennies per phone. They can already spy on us through the internal mic.

  • I mean, there were legitimate technical issues with the standard, especially on smartphones, which is where they really got pushed out. Most other devices do have headphones jacks. If I get a laptop, it's probably got a headphones jack. Radios will have headphones jacks. Get a mixer, it's got a headphones jack. I don't think that the standard is going to vanish anytime soon in general.

    I like headphones jacks. I have a ton of 1/8" and 1/4" devices and headphones that I happily use. But they weren't doing it for no reason.

    • From what I've read, the big, driving one that drove them out on smartphones was that the jack just takes up a lot more physical space in the phone than USB-C or Bluetooth. I'd rather just have a thicker phone, but a lot of people don't, and if you're going all over the phone trying to figure out what to eject to buy more space, that's gonna be a big target. For people who do want a jack on smartphones, which invariably have USB-C, you can get a similar effect to having a headphones jack by just leaving a small USB-C audio interface with a headphones jack on the end of your headphones (one with a passthrough USB-C port if you also want to use a USB-C port for other things).

    • A second issue was that the standard didn't have a way to provide power (there was a now-dead extension from many years back that is now dead, IIRC for MD players, that let a small amount of power be provided with an extra ring). That didn't matter for a long time, as long as your device could put out a strong enough signal to drive headphones of whatever impedance you had. But ANC has started to become popular now, and you need power for ANC. This is really the first time I think that there's a solid reason to want to power headphones.

    • The connection got shorted when plugging things in and out, which could result in loud sound on the membrane.

    • USB-C is designed so that the springy tensioning stuff that's there to keep the connection solid is on the (cheap, easy to replace) cord rather than the (expensive, hard to replace) device; I understand from past reading that this was a major reason that micro-USB replaced mini-USB. Instead of your device wearing out, the cord wears out. Not as much of an issue for headphones as mini-USB, but I think that it's probably fair to say that it's desirable to have the tensioning on the cord side.

    • On USB-C, the right part breaks. One irritation I have with USB-C is that it is...kind of flimsy. Like, it doesn't require that much force pushing on a plug sideways to damage a plug. However --- and I don't know if this was a design goal for USB-C, though I suspect it was --- my experience has been that if that happens, it's the plug on the (cheap, easy to replace) cord that gets damaged, not the device. I have a television with a headphones jack that I destroyed by tripping over a headphones cord once, because the headphones jack was nice and durable and let me tear components inside the television off. I've damaged several USB-C cables, but I've never damaged the device they're connected to while doing so.

    On an interesting note, the standard is extremely old, probably one of the oldest data standards in general use today; the 1/4" mono standard was from phone switchboards in the 1800s.

    EDIT: Also, one other perk of using USB-C instead of a built-in headphones jack on a smartphone is that if the DAC on your phone sucks, going the USB-C-audio-interface route means that you can use a different DAC. Can't really change the internal DAC. I don't know about other people, but last phone I had that did have an audio jack would let through a "wub wub wub" sound when I was charging it on USB off my car's 12V cigarette lighter adapter --- dirty power, but USB power is often really dirty. Was really obnoxious when feeding my car's stereo via its AUX port. That's very much fixable by putting some filtering on the DAC's power supply, maybe needs a capacitor on the thing, but the phone manufacturer didn't do it, maybe to save space or money. That's not something that I can go fix. I eventually worked around it by getting a battery-powered Bluetooth receiver that had a 1/8" headphones jack, cutting the phone's DAC out of the equation. The phone's internal DAC worked fine when the phone wasn't charging, but I wanted to have the phone plugged in for navigation stuff when I was driving.

    A lot of great points here, I would be on aboard if phones therefore had two USB-C ports as standard

  • A speaker i have from bose is always on and "sleeping" and can be connected to from the phone no matter what i do, drains the fucking battery and when i want to use it finaly its dead.. wouldnt be surprised if some headphones worked the same..

    A smart outlet (and running home assistant) will solve that problem.

  • It sounds like they have some kind of wake function that it’s always listening for? I don’t think that’s a common feature in headphones just because of the battery drain, but they’re always chucking useless features on electronics so I’m sure some are floating around out there. I doubt it’s something you wouldn’t know about unless they were secondhand, though.

    It's BLE - Bluetooth Low Energy.

    Basically devices with BLE can listen for a wake-up command and turn on, similar to the "magic packet" of wake on Ethernet.

    Super convenient for "find my device" applications, also nice to be able to connect and activate the device without having to press a power button like a peasant.

    It also means that most devices with BLE end up flat within a month. I had a speaker with BLE and had to deliberately download a much older version of the Android partner app to turn it off, as they dropped the option to do so in later versions for "convenience". With BLE on it would be flat in about 6 weeks regardless of whether I'd used it or not , which really ruined ad-hoc usage for me.

  • I was hoping this would allow me to take over Bluetooth speakers that people use while skiing and replace their music with a PSA about how no one wants to hear their music

    Most annoying people on the mountain

    Or public transit. Or public parks. Or grocery stores.

  • The Bluetooth chipset installed in popular models from major manufacturers is vulnerable. Hackers could use it to initiate calls and eavesdrop on devices.

    Source

    My Redmi buds 5 had a firmware update available for me in the app. It could be an older one though, their patch notes suck and don't even say the date. v4.3.8.8

  • I mean, there were legitimate technical issues with the standard, especially on smartphones, which is where they really got pushed out. Most other devices do have headphones jacks. If I get a laptop, it's probably got a headphones jack. Radios will have headphones jacks. Get a mixer, it's got a headphones jack. I don't think that the standard is going to vanish anytime soon in general.

    I like headphones jacks. I have a ton of 1/8" and 1/4" devices and headphones that I happily use. But they weren't doing it for no reason.

    • From what I've read, the big, driving one that drove them out on smartphones was that the jack just takes up a lot more physical space in the phone than USB-C or Bluetooth. I'd rather just have a thicker phone, but a lot of people don't, and if you're going all over the phone trying to figure out what to eject to buy more space, that's gonna be a big target. For people who do want a jack on smartphones, which invariably have USB-C, you can get a similar effect to having a headphones jack by just leaving a small USB-C audio interface with a headphones jack on the end of your headphones (one with a passthrough USB-C port if you also want to use a USB-C port for other things).

    • A second issue was that the standard didn't have a way to provide power (there was a now-dead extension from many years back that is now dead, IIRC for MD players, that let a small amount of power be provided with an extra ring). That didn't matter for a long time, as long as your device could put out a strong enough signal to drive headphones of whatever impedance you had. But ANC has started to become popular now, and you need power for ANC. This is really the first time I think that there's a solid reason to want to power headphones.

    • The connection got shorted when plugging things in and out, which could result in loud sound on the membrane.

    • USB-C is designed so that the springy tensioning stuff that's there to keep the connection solid is on the (cheap, easy to replace) cord rather than the (expensive, hard to replace) device; I understand from past reading that this was a major reason that micro-USB replaced mini-USB. Instead of your device wearing out, the cord wears out. Not as much of an issue for headphones as mini-USB, but I think that it's probably fair to say that it's desirable to have the tensioning on the cord side.

    • On USB-C, the right part breaks. One irritation I have with USB-C is that it is...kind of flimsy. Like, it doesn't require that much force pushing on a plug sideways to damage a plug. However --- and I don't know if this was a design goal for USB-C, though I suspect it was --- my experience has been that if that happens, it's the plug on the (cheap, easy to replace) cord that gets damaged, not the device. I have a television with a headphones jack that I destroyed by tripping over a headphones cord once, because the headphones jack was nice and durable and let me tear components inside the television off. I've damaged several USB-C cables, but I've never damaged the device they're connected to while doing so.

    On an interesting note, the standard is extremely old, probably one of the oldest data standards in general use today; the 1/4" mono standard was from phone switchboards in the 1800s.

    EDIT: Also, one other perk of using USB-C instead of a built-in headphones jack on a smartphone is that if the DAC on your phone sucks, going the USB-C-audio-interface route means that you can use a different DAC. Can't really change the internal DAC. I don't know about other people, but last phone I had that did have an audio jack would let through a "wub wub wub" sound when I was charging it on USB off my car's 12V cigarette lighter adapter --- dirty power, but USB power is often really dirty. Was really obnoxious when feeding my car's stereo via its AUX port. That's very much fixable by putting some filtering on the DAC's power supply, maybe needs a capacitor on the thing, but the phone manufacturer didn't do it, maybe to save space or money. That's not something that I can go fix. I eventually worked around it by getting a battery-powered Bluetooth receiver that had a 1/8" headphones jack, cutting the phone's DAC out of the equation. The phone's internal DAC worked fine when the phone wasn't charging, but I wanted to have the phone plugged in for navigation stuff when I was driving.

    That's great and all but I'm not switching to Bluetooth headphones and I'm definitely not going to fiddle around with dongles every time I switch between listening on my phone and my PC. Phones are gigantic anyways; let my have my headphone jack. I don't think it's a coincidence that all these smartphone manufacturers that ditched the old standard will happily sell you shiny expensive disposable wireless earbuds.

  • I mean, there were legitimate technical issues with the standard, especially on smartphones, which is where they really got pushed out. Most other devices do have headphones jacks. If I get a laptop, it's probably got a headphones jack. Radios will have headphones jacks. Get a mixer, it's got a headphones jack. I don't think that the standard is going to vanish anytime soon in general.

    I like headphones jacks. I have a ton of 1/8" and 1/4" devices and headphones that I happily use. But they weren't doing it for no reason.

    • From what I've read, the big, driving one that drove them out on smartphones was that the jack just takes up a lot more physical space in the phone than USB-C or Bluetooth. I'd rather just have a thicker phone, but a lot of people don't, and if you're going all over the phone trying to figure out what to eject to buy more space, that's gonna be a big target. For people who do want a jack on smartphones, which invariably have USB-C, you can get a similar effect to having a headphones jack by just leaving a small USB-C audio interface with a headphones jack on the end of your headphones (one with a passthrough USB-C port if you also want to use a USB-C port for other things).

    • A second issue was that the standard didn't have a way to provide power (there was a now-dead extension from many years back that is now dead, IIRC for MD players, that let a small amount of power be provided with an extra ring). That didn't matter for a long time, as long as your device could put out a strong enough signal to drive headphones of whatever impedance you had. But ANC has started to become popular now, and you need power for ANC. This is really the first time I think that there's a solid reason to want to power headphones.

    • The connection got shorted when plugging things in and out, which could result in loud sound on the membrane.

    • USB-C is designed so that the springy tensioning stuff that's there to keep the connection solid is on the (cheap, easy to replace) cord rather than the (expensive, hard to replace) device; I understand from past reading that this was a major reason that micro-USB replaced mini-USB. Instead of your device wearing out, the cord wears out. Not as much of an issue for headphones as mini-USB, but I think that it's probably fair to say that it's desirable to have the tensioning on the cord side.

    • On USB-C, the right part breaks. One irritation I have with USB-C is that it is...kind of flimsy. Like, it doesn't require that much force pushing on a plug sideways to damage a plug. However --- and I don't know if this was a design goal for USB-C, though I suspect it was --- my experience has been that if that happens, it's the plug on the (cheap, easy to replace) cord that gets damaged, not the device. I have a television with a headphones jack that I destroyed by tripping over a headphones cord once, because the headphones jack was nice and durable and let me tear components inside the television off. I've damaged several USB-C cables, but I've never damaged the device they're connected to while doing so.

    On an interesting note, the standard is extremely old, probably one of the oldest data standards in general use today; the 1/4" mono standard was from phone switchboards in the 1800s.

    EDIT: Also, one other perk of using USB-C instead of a built-in headphones jack on a smartphone is that if the DAC on your phone sucks, going the USB-C-audio-interface route means that you can use a different DAC. Can't really change the internal DAC. I don't know about other people, but last phone I had that did have an audio jack would let through a "wub wub wub" sound when I was charging it on USB off my car's 12V cigarette lighter adapter --- dirty power, but USB power is often really dirty. Was really obnoxious when feeding my car's stereo via its AUX port. That's very much fixable by putting some filtering on the DAC's power supply, maybe needs a capacitor on the thing, but the phone manufacturer didn't do it, maybe to save space or money. That's not something that I can go fix. I eventually worked around it by getting a battery-powered Bluetooth receiver that had a 1/8" headphones jack, cutting the phone's DAC out of the equation. The phone's internal DAC worked fine when the phone wasn't charging, but I wanted to have the phone plugged in for navigation stuff when I was driving.

    I’d rather just have a thicker phone, but a lot of people wouldn’t

    I think this is a case where the corporations were telling people what they wanted rather than people really asking for thinner phones. Same thing with bezels, I don't know anyone who asked for the screen to go all the way to the edge (or worse, curve around onto the sides). Apple and Samsung said 'this is what people want' when in fact it was what their marketing department wanted because they wouldn't be able to sell the iGalaxy N+1 if it was slightly thicker or heavier than the iGalaxy N.

  • Every spy in my vicinity is going to be dancing to The Meters - Cissy Strut.

    Shitty Beatles & the meters.. I'll follow you anywhere

  • Every spy in my vicinity is going to be dancing to The Meters - Cissy Strut.

    Awwwwwwwwwwwwww YAH

  • The Bluetooth chipset installed in popular models from major manufacturers is vulnerable. Hackers could use it to initiate calls and eavesdrop on devices.

    Source

    They said I was mad when they removed the headphone jack - well who’s mad now??! AHAHahahahaaaaaaahhhhcrap it’s me.

    I’m still mad. Fuckers.

  • The Bluetooth chipset installed in popular models from major manufacturers is vulnerable. Hackers could use it to initiate calls and eavesdrop on devices.

    Source

    I had a neighbor about 6 years ago that blasted rap at full volume every evening.

    rap booming in the background

    one fine day

    "hmmm, what were these headphones on bt again? wait... soundbar. I don't have a soundbar.

    hmmm, I wonder"

    device paired

    Jellyfin>Artists>..... Meshuggah

    Obzen

    Combustion

    play

    Volume 100%

    "I think I'll go to the store for a while!"

  • I had a neighbor about 6 years ago that blasted rap at full volume every evening.

    rap booming in the background

    one fine day

    "hmmm, what were these headphones on bt again? wait... soundbar. I don't have a soundbar.

    hmmm, I wonder"

    device paired

    Jellyfin>Artists>..... Meshuggah

    Obzen

    Combustion

    play

    Volume 100%

    "I think I'll go to the store for a while!"

    Elastic would’ve been amazing (among other things, it has all songs on the album laid on top of another, playing simultaneously)

  • Elastic would’ve been amazing (among other things, it has all songs on the album laid on top of another, playing simultaneously)

    This one is great for destroying speakers: warning super loud (turn down your volume before playing) https://m.soundcloud.com/osium-1/official-paul-walker-tribute-fast-and-furious-7

  • 337 Stimmen
    19 Beiträge
    112 Aufrufe
    R
    What I'm speaking about is that it should be impossible to do some things. If it's possible, they will be done, and there's nothing you can do about it. To solve the problem of twiddled social media (and moderation used to assert dominance) we need a decentralized system of 90s Web reimagined, and Fediverse doesn't deliver it - if Facebook and Reddit are feudal states, then Fediverse is a confederation of smaller feudal entities. A post, a person, a community, a reaction and a change (by moderator or by the user) should be global entities (with global identifiers, so that the object by id of #0000001a2b3c4d6e7f890 would be the same object today or 10 years later on every server storing it) replicated over a network of servers similarly to Usenet (and to an IRC network, but in an IRC network servers are trusted, so it's not a good example for a global system). Really bad posts (or those by persons with history of posting such) should be banned on server level by everyone. The rest should be moderated by moderator reactions\changes of certain type. Ideally, for pooling of resources and resilience, servers would be separated by types into storage nodes (I think the name says it, FTP servers can do the job, but no need to be limited by it), index nodes (scraping many storage nodes, giving out results in structured format fit for any user representation, say, as a sequence of posts in one community, or like a list of communities found by tag, or ... , and possibly being connected into one DHT for Kademlia-like search, since no single index node will have everything), and (like in torrents?) tracker nodes for these and for identities, I think torrent-like announce-retrieve service is enough - to return a list of storage nodes storing, say, a specified partition (subspace of identifiers of objects, to make looking for something at least possibly efficient), or return a list of index nodes, or return a bunch of certificates and keys for an identity (should be somehow cryptographically connected to the global identifier of a person). So when a storage node comes online, it announces itself to a bunch of such trackers, similarly with index nodes, similarly with a user. One can also have a NOSTR-like service for real-time notifications by users. This way you'd have a global untrusted pooled infrastructure, allowing to replace many platforms. With common data, identities, services. Objects in storage and index services can be, say, in a format including a set of tags and then the body. So a specific application needing to show only data related to it would just search on index services and display only objects with tags of, say, "holo_ns:talk.bullshit.starwars" and "holo_t:post", like a sequence of posts with ability to comment, or maybe it would search objects with tags "holo_name:My 1999-like Star Wars holopage" and "holo_t:page" and display the links like search results in Google, and then clicking on that you'd see something presented like a webpage, except links would lead to global identifiers (or tag expressions interpreted by the particular application, who knows). (An index service may return, say, an array of objects, each with identifier, tags, list of locations on storage nodes where it's found or even bittorrent magnet links, and a free description possibly ; then the user application can unify responses of a few such services to avoid repetitions, maybe sort them, represent them as needed, so on.) The user applications for that common infrastructure can be different at the same time. Some like Facebook, some like ICQ, some like a web browser, some like a newsreader. (Star Wars is not a random reference, my whole habit of imagining tech stuff is from trying to imagine a science fiction world of the future, so yeah, this may seem like passive dreaming and it is.)
  • 804 Stimmen
    110 Beiträge
    707 Aufrufe
    S
    I do not have downvotes on my instance, so please, have a
  • 97 Stimmen
    3 Beiträge
    30 Aufrufe
    solsangraal@lemmy.zipS
    i had assumed that PDs already had all this. either way, they've got your DL photo on file, so it's not like you weren't already in there edit: nevermind, i misunderstood and thought the AI co was giving images to the PD. this is fascist nazi bullshit
  • Google’s test turns search results into an AI-generated podcast

    Technology technology
    4
    1
    5 Stimmen
    4 Beiträge
    27 Aufrufe
    lupusblackfur@lemmy.worldL
    Oh, Google... Just eviler and eviler every day. Not only robbing creators of any monetization via clicking on links but now just blatantly stealing their content for an even more efficient theft model. FFS. I can't fucking wait to complete my de-googling project and get you the absolute fuck completely out of my life. I've developed a hatred for Google that actually rivals my hatred for Apple. ‍️
  • Napster/BitTorrent for machine learning?

    Technology technology
    3
    1
    27 Stimmen
    3 Beiträge
    30 Aufrufe
    G
    What would a use case look like? I assume that the latency will make it impractical to train something that's LLM-sized. But even for something small, wouldn't a data center be more efficient?
  • Apple Watch Shipments’ Continuous Decline

    Technology technology
    10
    1
    22 Stimmen
    10 Beiträge
    55 Aufrufe
    A
    i mean as a core feature of a watch/smartwatch in general. garmin is going above and beyond compared to the competition in that area, and that's great. But that doesn't mean every other smartwatch manufacturer arbitrarily locking traditional watch features behind paywalls. and yeah apple does fitness themed commercials for apple watch because it does help with fitness a ton out of the box. just not specifically guided workouts.
  • No Frills PCB Brings USB-C Power To The Breadboard

    Technology technology
    3
    1
    0 Stimmen
    3 Beiträge
    32 Aufrufe
    coelacanthus@lemmy.kde.socialC
    and even without it, you'll get 150mA @ 5V by default out of the USB 3 host upstream and up to 900mA with some pretty basic USB negotiation in a protocol that dates from USB 1.0 That's wrong. With USB Type-C, you can get the power up to 3A @ 5V with just two 5.1kΩ resistor on CC pins.
  • 0 Stimmen
    4 Beiträge
    34 Aufrufe
    redfox@infosec.pubR
    Yeah, damn, I always forget about that...just like they want...