Skip to content

Fairphone announces the €599 Fairphone 6, with a 6.31" 120Hz LTPO OLED display, a Snapdragon 7s Gen 3 chip, and enhanced modularity with 12 swappable parts

Technology
555 240 257
  • 37 Stimmen
    2 Beiträge
    6 Aufrufe
    P
    Idk if it’s content blocking on my end but I can’t tell you how upset I am that the article had no pictures of the contraption or a video of it in action.
  • 241 Stimmen
    77 Beiträge
    153 Aufrufe
    jacksonlamb@lemmy.worldJ
    bizarre, dismal What's bizarre and dismal is that someone is so starved for dopamine and attention from corporations that this is how they perceive what life looks like when you are not being targetted. This is my normal view and it is far better.
  • 84 Stimmen
    13 Beiträge
    23 Aufrufe
    M
    It's a bit of a sticking point in Australia which is becoming more and more of a 'two-speed' society. Foxtel is for the rich classes, it caters to the right wing. Sky News is on Foxtel. These eSafety directives killing access to youtube won't affect those rich kids so much, but for everyone else it's going to be a nightmare. My only possible hope out of this is that maybe, Parliament and ACMA (Australian Communications and Media Authority, TV standards) decide that since we need a greater media landscape for kids and they can't be allowed to have it online, that maybe more than 3 major broadcasters could be allowed. It's not a lack of will that stops anyone else making a new free-to-air network, it's legislation, there are only allowed to be 3 commercial FTA broadcasters in any area. I don't love Youtube or the kids watching it, it's that the alternatives are almost objectively worse. 10 and 7 and garbage 24/7 and 9 is basically a right-wing hugbox too.
  • 33 Stimmen
    15 Beiträge
    7 Aufrufe
    E
    And they all suck, my boss is still alive.
  • Matrix.org is Introducing Premium Accounts

    Technology technology
    110
    1
    225 Stimmen
    110 Beiträge
    64 Aufrufe
    F
    It's nice that this exists, but even for this I'd prefer to use an open source tool. And it of course helps with migration only if the old HS is still online.. I think most practically this migration function would be built inside some Matrix client (one that would support more than one server to start with), but I suppose a standalone tool would be a decent solution as well.
  • The world could experience a year above 2°C of warming by 2029

    Technology technology
    17
    1
    200 Stimmen
    17 Beiträge
    32 Aufrufe
    sattarip@lemmy.blahaj.zoneS
    Thank you for the clarification.
  • Meta is now a defense contractor

    Technology technology
    54
    1
    361 Stimmen
    54 Beiträge
    38 Aufrufe
    B
    Best decision ever for a company. The US gov pisses away billions of their taxpayers money and buys all the low quality crap from the MIL without questions.
  • 1 Stimmen
    8 Beiträge
    15 Aufrufe
    L
    I think the principle could be applied to scan outside of the machine. It is making requests to 127.0.0.1:{port} - effectively using your computer as a "server" in a sort of reverse-SSRF attack. There's no reason it can't make requests to 10.10.10.1:{port} as well. Of course you'd need to guess the netmask of the network address range first, but this isn't that hard. In fact, if you consider that at least as far as the desktop site goes, most people will be browsing the web behind a standard consumer router left on defaults where it will be the first device in the DHCP range (e.g. 192.168.0.1 or 10.10.10.1), which tends to have a web UI on the LAN interface (port 8080, 80 or 443), then you'd only realistically need to scan a few addresses to determine the network address range. If you want to keep noise even lower, using just 192.168.0.1:80 and 192.168.1.1:80 I'd wager would cover 99% of consumer routers. From there you could assume that it's a /24 netmask and scan IPs to your heart's content. You could do top 10 most common ports type scans and go in-depth on anything you get a result on. I haven't tested this, but I don't see why it wouldn't work, when I was testing 13ft.io - a self-hosted 12ft.io paywall remover, an SSRF flaw like this absolutely let you perform any network request to any LAN address in range.