Skip to content

Fairphone announces the €599 Fairphone 6, with a 6.31" 120Hz LTPO OLED display, a Snapdragon 7s Gen 3 chip, and enhanced modularity with 12 swappable parts

Technology
555 240 288
  • 37 Stimmen
    2 Beiträge
    9 Aufrufe
    P
    Idk if it’s content blocking on my end but I can’t tell you how upset I am that the article had no pictures of the contraption or a video of it in action.
  • 1 Stimmen
    1 Beiträge
    9 Aufrufe
    Niemand hat geantwortet
  • How will the space race affect our environment? (Video 25mins)

    Technology technology
    1
    1
    17 Stimmen
    1 Beiträge
    7 Aufrufe
    Niemand hat geantwortet
  • 110 Stimmen
    84 Beiträge
    69 Aufrufe
    T
    It's not new technology you numpty. It's not news. It's not a scientific paper. Wireless energy transfer isn't "bullshit", it's been an understood aspect of physics for a long time. Since you seem unable to grasp the concept, I'll put it in bold and italics: This is a video of a guy doing a DIY project where he wanted to make his setup as wireless as possible. In the video he also goes over his thoughts and design considerations, and explains how the tech works for people who don't already know. It is not new technology. It is not pseudoscience. It is a guy showing off his bespoke PC setup. It does not need an article or a blog post. He can post about it in any form he wants. Personally, I think showcasing this kind of thing in a video is much better than a wall of text. I want to see the process, the finished product, the tools used and how he used them.
  • 358 Stimmen
    113 Beiträge
    80 Aufrufe
    S
    The problem is the cost of each. Right now material is dirt cheap and energy prices are going up. And we are not good at long term planning.
  • 131 Stimmen
    67 Beiträge
    92 Aufrufe
    I
    Arcing causes more fires, because over current caused all the fires until we tightened standards and dual-mode circuit breakers. Now fires are caused by loose connections arcing, and damaged wires arcing to flammable material. Breakers are specifically designed for a sustained current, but arcing is dangerous because it tends to cascade, light arcing damages contacts, leading to more arcing in a cycle. The real danger of arcing is that it can happen outside of view, and start fires that aren't caught till everything burns down.
  • 1 Stimmen
    8 Beiträge
    19 Aufrufe
    L
    I think the principle could be applied to scan outside of the machine. It is making requests to 127.0.0.1:{port} - effectively using your computer as a "server" in a sort of reverse-SSRF attack. There's no reason it can't make requests to 10.10.10.1:{port} as well. Of course you'd need to guess the netmask of the network address range first, but this isn't that hard. In fact, if you consider that at least as far as the desktop site goes, most people will be browsing the web behind a standard consumer router left on defaults where it will be the first device in the DHCP range (e.g. 192.168.0.1 or 10.10.10.1), which tends to have a web UI on the LAN interface (port 8080, 80 or 443), then you'd only realistically need to scan a few addresses to determine the network address range. If you want to keep noise even lower, using just 192.168.0.1:80 and 192.168.1.1:80 I'd wager would cover 99% of consumer routers. From there you could assume that it's a /24 netmask and scan IPs to your heart's content. You could do top 10 most common ports type scans and go in-depth on anything you get a result on. I haven't tested this, but I don't see why it wouldn't work, when I was testing 13ft.io - a self-hosted 12ft.io paywall remover, an SSRF flaw like this absolutely let you perform any network request to any LAN address in range.
  • 0 Stimmen
    7 Beiträge
    8 Aufrufe
    C
    Oh this is a good callout, I'm definitely using wired and not wireless.