Skip to content

ROCKPro64 - Kamils neuer 0.10.x Release

ROCKPro64
  • Da Kamil ja wieder recht fleißig ist, mal ein kurzes Zwischenfazit.

    IMG_20200405_114848.jpg

    Schnelltest heute Nachmittag. Noch mit dem Release 10.3. uboot liegt im SPI!

    • Boot von USB2 - OK
    • Boot von USB3 nur mit aktivem USB-Hub möglich
    • Boot von HDD angeschlossen an der PCIe SATA-Karte von Pine64
    • Boot von PCIe NVMe SSD

    Das sind ja schon sehr erfreuliche Ergebnisse 🙂

    Der neue Release (0.10.x) enthält den 5.6er Linux Kernel.

    rock64@rockpro64:~$ uname -a
    Linux rockpro64 5.6.0-1127-ayufan-g1bd266cae93f #ayufan SMP PREEMPT Sat Apr 4 11:14:08 UTC 2020 aarch64 GNU/Linux
    

    Tipp: Der beinhaltet Wireguard 1.0.0 🤗

    LAN

    rock64@rockpro64:~$ sudo iperf3 -c 192.168.3.213
    [sudo] password for rock64: 
    Connecting to host 192.168.3.213, port 5201
    [  5] local 192.168.3.14 port 42836 connected to 192.168.3.213 port 5201
    [ ID] Interval           Transfer     Bitrate         Retr  Cwnd
    [  5]   0.00-1.00   sec   114 MBytes   957 Mbits/sec    0   1.10 MBytes       
    [  5]   1.00-2.00   sec   112 MBytes   944 Mbits/sec    0   1.10 MBytes       
    [  5]   2.00-3.00   sec   112 MBytes   944 Mbits/sec    0   1.10 MBytes       
    [  5]   3.00-4.00   sec   111 MBytes   933 Mbits/sec  281    150 KBytes       
    [  5]   4.00-5.00   sec   111 MBytes   933 Mbits/sec  301   86.3 KBytes       
    [  5]   5.00-6.00   sec   112 MBytes   944 Mbits/sec  311    147 KBytes       
    [  5]   6.00-7.00   sec   111 MBytes   933 Mbits/sec   53    349 KBytes       
    [  5]   7.00-8.00   sec   112 MBytes   944 Mbits/sec   99   79.2 KBytes       
    [  5]   8.00-9.00   sec   111 MBytes   933 Mbits/sec  245    174 KBytes       
    [  5]   9.00-10.00  sec   112 MBytes   944 Mbits/sec  119    303 KBytes       
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bitrate         Retr
    [  5]   0.00-10.00  sec  1.10 GBytes   941 Mbits/sec  1409             sender
    [  5]   0.00-10.00  sec  1.09 GBytes   938 Mbits/sec                  receiver
    
    iperf Done.
    rock64@rockpro64:~$ sudo iperf3 -R -c 192.168.3.213
    Connecting to host 192.168.3.213, port 5201
    Reverse mode, remote host 192.168.3.213 is sending
    [  5] local 192.168.3.14 port 42840 connected to 192.168.3.213 port 5201
    [ ID] Interval           Transfer     Bitrate
    [  5]   0.00-1.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   1.00-2.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   2.00-3.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   3.00-4.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   4.00-5.00   sec   112 MBytes   942 Mbits/sec                  
    [  5]   5.00-6.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   6.00-7.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   7.00-8.00   sec   112 MBytes   941 Mbits/sec                  
    [  5]   8.00-9.00   sec   112 MBytes   942 Mbits/sec                  
    [  5]   9.00-10.00  sec   112 MBytes   941 Mbits/sec                  
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval           Transfer     Bitrate         Retr
    [  5]   0.00-10.00  sec  1.10 GBytes   942 Mbits/sec    0             sender
    [  5]   0.00-10.00  sec  1.10 GBytes   941 Mbits/sec                  receiver
    
    iperf Done.
    

    Ich werde den Release die Tage noch intensiv testen, ein paar Fehler konnte ich ja schon dem Kamil melden und sind auch schon gefixt.

    Nach langer Zeit hat man mal wieder das Gefühl, es geht was voran. Ein aktueller Kernel 5.6, Booten nach seinen Wünschen nun möglich und das ein oder andere werde ich dann auch noch entdecken.

    Kamil bietet Image für folgende Hardware an

    • Rock64
    • ROCKPro64
    • PineBookPro
    • RockPi4B

    Als Distributionen gibt es

    Debian Buster 10

    • Container Image
    • Minimal Image
    • OpenMediaVault

    Ubuntu Focal

    • Minimal Image

    Desktop Images werden dann später kommen, wenn sie fertig sind. So nach dem Motto When it's Done 😉

    Viel Spaß beim Testen!

  • Manjaro - KDE Plasma 6

    Linux
    1
    0 Stimmen
    1 Beiträge
    63 Aufrufe
    Niemand hat geantwortet
  • TwisterOS

    Images
    1
    0 Stimmen
    1 Beiträge
    225 Aufrufe
    Niemand hat geantwortet
  • OpenWRT - Zonen

    Verschoben OpenWRT & Ubiquiti ER-X
    2
    0 Stimmen
    2 Beiträge
    340 Aufrufe
    FrankMF

    Es ist was heller geworden 🙂

    7b86e97c-31a5-44b6-809f-25d9d1c2ee4a-image.png

    Die besagte Forward Regel

    Zonen.png

    Diese Forward Regel zieht erst dann, wenn es mehrere Interfaces in einer Zone gibt. Aus der Doku

    INPUT rules for a zone describe what happens to traffic trying to reach the router itself through an interface in that zone. OUTPUT rules for a zone describe what happens to traffic originating from the router itself going through an interface in that zone. FORWARD rules for a zone describe what happens to traffic passing between different interfaces belonging in the same zone.

    Das heisst nun, das ein Forwarding zwischen zwei Zonen immer eine spezifische Regel unter Traffic Rules benötigt.

    Forwarding between zones always requires a specific rule.

    Somit ist ein Forwarding zwischen zwei Zonen in den Standard Einstellungen nicht erlaubt. Das kann ich hier auch so bestätigen. Das ist ja auch das was ich mit meiner "DMZ"-Zone erreichen möchte. Kein Zugriff auf LAN.

    Unter Zone ⇒ Forwardings kann man jetzt sehen, das das Forwarding von LAN in Richtung WAN und DMZ erlaubt ist. WAN ist logisch, sonst komme ich ja nicht ins Internet. DMZ habe ich eingestellt, damit ich auch Teilnehmer im DMZ Netz erreichen kann, wenn ich da mal ran muss.

    8a548c29-8bc5-4074-8099-66460bcea9a8-image.png

    Stelle ich das jetzt so ein.

    dca8b393-f613-4cab-a377-ffbc2bb8ddf5-image.png

    Dann kann ich von der DMZ Zone aus das LAN erreichen. Aha, so langsam verstehe ich 😉

    Quelle: https://forum.openwrt.org/t/firewall-zones-and-settings/84369

  • Ayufan Release 0.7.13 (WiFi)

    ROCKPro64
    6
    0 Stimmen
    6 Beiträge
    460 Aufrufe
    FrankMF

    Für Bluetooth scheint noch was zu fehlen

    root@rockpro64:/mnt/home/rock64# service bluetooth status ● bluetooth.service - Bluetooth service Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled) Active: active (running) since Sat 2019-04-06 17:36:54 UTC; 2min 11s ago Docs: man:bluetoothd(8) Main PID: 2421 (bluetoothd) Status: "Running" Tasks: 1 (limit: 2380) CGroup: /system.slice/bluetooth.service └─2421 /usr/lib/bluetooth/bluetoothd Apr 06 17:36:54 rockpro64 systemd[1]: Starting Bluetooth service... Apr 06 17:36:54 rockpro64 bluetoothd[2421]: Bluetooth daemon 5.48 Apr 06 17:36:54 rockpro64 systemd[1]: Started Bluetooth service. Apr 06 17:36:54 rockpro64 bluetoothd[2421]: Starting SDP server Apr 06 17:36:54 rockpro64 bluetoothd[2421]: kernel lacks bnep-protocol support Apr 06 17:36:54 rockpro64 bluetoothd[2421]: System does not support network plugin Apr 06 17:36:54 rockpro64 bluetoothd[2421]: Bluetooth management interface 1.10 initialized
  • Kamil hat mal wieder Zeit?

    ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    448 Aufrufe
    Niemand hat geantwortet
  • ROCKPro WLan Modul

    Verschoben ROCKPro64
    1
    0 Stimmen
    1 Beiträge
    684 Aufrufe
    Niemand hat geantwortet
  • 0 Stimmen
    2 Beiträge
    749 Aufrufe
    FrankMF

    Offizielle Bestätigung -> http://files.pine64.org

  • Benchmarks

    Angeheftet Verschoben Archiv
    10
    0 Stimmen
    10 Beiträge
    2k Aufrufe
    FrankMF
    iozone Test (0.6.52) Hardware

    Hardware ist eine Samsung EVO 960 m.2 mit 250GB

    Eingabe sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Ausgabe Run began: Thu Jun 14 12:04:01 2018 Include fsync in write timing O_DIRECT feature enabled Auto Mode File size set to 102400 kB Record Size 4 kB Record Size 16 kB Record Size 512 kB Record Size 1024 kB Record Size 16384 kB Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 40859 79542 101334 101666 31721 60459 102400 16 113215 202566 234307 233091 108334 154750 102400 512 362864 412548 359279 362810 340235 412626 102400 1024 400478 453205 381115 385746 372378 453548 102400 16384 583762 598047 595752 596251 590950 604690

    Zum direkten Vergleich hier heute mal mit 4.17.0-rc6-1019

    rock64@rockpro64:/mnt$ uname -a Linux rockpro64 4.17.0-rc6-1019-ayufan-gfafc3e1c913f #1 SMP PREEMPT Tue Jun 12 19:06:59 UTC 2018 aarch64 aarch64 aarch64 GNU/Linux iozone Test rock64@rockpro64:/mnt$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Iozone: Performance Test of File I/O Version $Revision: 3.429 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa. Run began: Sat Jun 16 06:34:43 2018 Include fsync in write timing O_DIRECT feature enabled Auto Mode File size set to 102400 kB Record Size 4 kB Record Size 16 kB Record Size 512 kB Record Size 1024 kB Record Size 16384 kB Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 48672 104754 115838 116803 47894 103606 102400 16 168084 276437 292660 295458 162550 273703 102400 512 566572 597648 580005 589209 534508 597007 102400 1024 585621 624443 590545 599177 569452 630098 102400 16384 504871 754710 765558 780592 777696 753426 iozone test complete.