Skip to content

Restic & Rclone & Nextcloud

Linux
  • Ich hatte mich schon mal mit rclone beschäftigt -> https://forum.frank-mankel.org/topic/27/restic-ein-backupkonzept-automatisieren?_=1584115522317

    Was ist rclone?

    Rclone - rsync for cloud storage

    Nun mal rclone auf meinem Haupt-PC, Debian Buster, ausprobieren.

    Installation

    root@debian:~# apt install rclone
    Paketlisten werden gelesen... Fertig
    Abhängigkeitsbaum wird aufgebaut.       
    Statusinformationen werden eingelesen.... Fertig
    Die folgenden NEUEN Pakete werden installiert:
      rclone
    0 aktualisiert, 1 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
    Es müssen 6.248 kB an Archiven heruntergeladen werden.
    Nach dieser Operation werden 26,6 MB Plattenplatz zusätzlich benutzt.
    Holen:1 https://deb.debian.org/debian buster/main amd64 rclone amd64 1.45-3 [6.248 kB]
    Es wurden 6.203 kB in 8 s geholt (777 kB/s).
    Vormals nicht ausgewähltes Paket rclone wird gewählt.
    (Lese Datenbank ... 238249 Dateien und Verzeichnisse sind derzeit installiert.)
    Vorbereitung zum Entpacken von .../rclone_1.45-3_amd64.deb ...
    Entpacken von rclone (1.45-3) ...
    rclone (1.45-3) wird eingerichtet ...
    

    Konfiguration

    root@debian:~# rclone config
    2020/03/14 09:20:19 NOTICE: Config file "/root/.config/rclone/rclone.conf" not found - using defaults
    No remotes found - make a new one
    n) New remote
    s) Set configuration password
    q) Quit config
    n/s/q> n
    name> nextcloud
    Type of storage to configure.
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / A stackable unification remote, which can appear to merge the contents of several remotes
       \ "union"
     2 / Alias for a existing remote
       \ "alias"
     3 / Amazon Drive
       \ "amazon cloud drive"
     4 / Amazon S3 Compliant Storage Providers (AWS, Ceph, Dreamhost, IBM COS, Minio)
       \ "s3"
     5 / Backblaze B2
       \ "b2"
     6 / Box
       \ "box"
     7 / Cache a remote
       \ "cache"
     8 / Dropbox
       \ "dropbox"
     9 / Encrypt/Decrypt a remote
       \ "crypt"
    10 / FTP Connection
       \ "ftp"
    11 / Google Cloud Storage (this is not Google Drive)
       \ "google cloud storage"
    12 / Google Drive
       \ "drive"
    13 / Hubic
       \ "hubic"
    14 / JottaCloud
       \ "jottacloud"
    15 / Local Disk
       \ "local"
    16 / Microsoft Azure Blob Storage
       \ "azureblob"
    17 / Microsoft OneDrive
       \ "onedrive"
    18 / OpenDrive
       \ "opendrive"
    19 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
       \ "swift"
    20 / Pcloud
       \ "pcloud"
    21 / SSH/SFTP Connection
       \ "sftp"
    22 / Webdav
       \ "webdav"
    23 / Yandex Disk
       \ "yandex"
    24 / http Connection
       \ "http"
    Storage> 22
    ** See help for webdav backend at: https://rclone.org/webdav/ **
    
    URL of http host to connect to
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Connect to example.com
       \ "https://example.com"
    url> https://nextcloud.example.de/remote.php/dav/files/User/
    Name of the Webdav site/service/software you are using
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Nextcloud
       \ "nextcloud"
     2 / Owncloud
       \ "owncloud"
     3 / Sharepoint
       \ "sharepoint"
     4 / Other site/service or software
       \ "other"
    vendor> 1
    User name
    Enter a string value. Press Enter for the default ("").
    user> Frank
    Password.
    y) Yes type in my own password
    g) Generate random password
    n) No leave this optional password blank
    y/g/n> y
    Enter the password:
    password:
    Confirm the password:
    password:
    Bearer token instead of user/pass (eg a Macaroon)
    Enter a string value. Press Enter for the default ("").
    bearer_token> 
    Remote config
    --------------------
    [nextcloud]
    url = https://nextcloud.example.de/remote.php/dav/files/Frank/
    vendor = nextcloud
    user = Frank
    pass = *** ENCRYPTED ***
    --------------------
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y
    Current remotes:
    
    Name                 Type
    ====                 ====
    nextcloud            webdav
    
    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> q
    

    Das sollte für Euch als Nextcloud User keine besondere Herausforderung sein. Unter https://nextcloud.example.de/settings/user/security legt ihr, wie gewohnt, das Gerät fest was auf Eure Nextcloud Instanz zugreifen darf.

    Test

    rclone ls nextcloud:
    

    Ein erster Test gab mir den kompletten Inhalt der Nextcloud Installation aus. Hmm, nicht das was ich wollte. rclone soll nur auf ein bestimmtes Verzeichnis zugreifen dürfen. Also schnell einen Ordner in der Nextcloud angelegt.

    Kurz ändern.

    root@debian:~# rclone config
    Current remotes:
    
    Name                 Type
    ====                 ====
    nextcloud            webdav
    
    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> e
    Choose a number from below, or type in an existing value
     1 > nextcloud
    remote> 1
    --------------------
    [nextcloud]
    type = webdav
    url = https://nextcloud.example.de/remote.php/dav/files/Frank/
    vendor = nextcloud
    user = Frank
    pass = *** ENCRYPTED ***
    --------------------
    Edit remote
    ** See help for webdav backend at: https://rclone.org/webdav/ **
    
    Value "url" = "https://nextcloud.example.de/remote.php/dav/files/Frank/"
    Edit? (y/n)>
    y) Yes
    n) No
    y/n> y
    URL of http host to connect to
    Enter a string value. Press Enter for the default ("").
    Choose a number from below, or type in your own value
     1 / Connect to example.com
       \ "https://example.com"
    url> https://nextcloud.example.de/remote.php/dav/files/Frank/rclone/                                          
    Value "vendor" = "nextcloud"
    Edit? (y/n)>
    y) Yes
    n) No
    y/n> n
    Value "user" = "Frank"
    Edit? (y/n)>
    y) Yes
    n) No
    y/n> n
    Value "pass" = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
    Edit? (y/n)>
    y) Yes
    n) No
    y/n> n
    Value "bearer_token" = ""
    Edit? (y/n)>
    y) Yes
    n) No
    y/n> n
    --------------------
    [nextcloud]
    type = webdav
    url = https://nextcloud.example.de/remote.php/dav/files/Frank/rclone/
    vendor = nextcloud
    user = Frank
    pass = *** ENCRYPTED ***
    --------------------
    y) Yes this is OK
    e) Edit this remote
    d) Delete this remote
    y/e/d> y
    Remote config
    Current remotes:
    
    Name                 Type
    ====                 ====
    nextcloud            webdav
    
    e) Edit existing remote
    n) New remote
    d) Delete remote
    r) Rename remote
    c) Copy remote
    s) Set configuration password
    q) Quit config
    e/n/d/r/c/s/q> q
    

    Erneuter Test

    root@debian:~# rclone ls nextcloud:
    

    Jetzt zeigt er ein leeres Verzeichnis an. Kurz ein Dokument erstellt.

    root@debian:~# rclone ls nextcloud:
             4 Testing.md
    

    Passt. Die rclone Konfiguration ist abgeschlossen. Jetzt kann ich mit rclone auf meine Nextcloud Installation zugreifen. Und wofür das Ganze? Mit Restic, in Verbindung mit rclone, möchte ich eine Datensicherung einrichten die Daten verschlüsselt in meiner Nextcloud Instanz ablegt.

  • Gut, nun zum Restic Teil.

    In Debian Buster ist aktuell diese Version enthalten.

    restic/stable,now 0.9.4+ds-2+b1 amd64  [installiert]
      backup program with multiple revisions, encryption and more
    

    Installation

    apt install restic
    

    Version checken mit

    root@debian:~# restic version
    restic 0.9.4 compiled with go1.11.6 on linux/amd64
    

    INIT

    Um jetzt eine Datensicherung zu initialisieren, muss man folgendes eingeben.

    root@debian:~# restic -r rclone:nextcloud:HOME init
    enter password for new repository: 
    enter password again: 
    created restic repository 4bxxxxxx16 at rclone:nextcloud:HOME
    
    Please note that knowledge of your password is required to access
    the repository. Losing your password means that your data is
    irrecoverably lost.
    

    In diesem Beispiel erzeuge ich eine Datensicherung in der Nextcloud Instanz im Verzeichnis HOME.

    8b0322e0-0896-4167-8d25-6e341a61d461-image.png

    Man wird nach dem Passwort gefragt, alles so wie wir es kennen. Mehr zu Restic gibt es hier. Man könnte jetzt natürlich auch mehrere Datensicherungen dort ablegen, dazu müsste das HOME gegen was anderes ausgetauscht werden.

    Backup Plan

    Ich möchte die wichtigsten Daten aus meinem Homeverzeichnis sichern. Dazu müssen wir uns Gedanken machen, was wichtig ist.

    Ich habe da folgende Sachen mal ausgesucht

    • Scripte_NAS
    • .cinnamon
    • .config
    • .filezilla
    • .gnupg
    • .joplin
    • .mozilla
    • .ssh
    • .thunderbird
    • .vscode

    Nun erstellen wir eine INCLUDE Datei.

     nano includes.txt
    

    Die Dateien von oben rein und speichern.

    BACKUP

    Das sieht dann so aus.

    restic --password-file /root/passwd -r rclone:nextcloud:HOME backup --files-from /root/includes.txt
    

    In /root/passwd liegt das Passwort, wir wollen das Ganze ja bitte schön automatisieren.

    Der Rest sollte klar sein, ansonsten verweise ich auf die tolle Anleitung.

    Nun werden alle Dateien verschlüsselt in der Nextcloud Instanz abgelegt. So mit kann auch kein neugieriger Systemadministrator da was mit anfangen 😉

  • Hier mal eine Ausgabe vom ersten Durchgang

    root@frank-MS-7C37:~# restic --password-file /root/passwd -r rclone:Nextcloud:HOME_UBUNTU backup --files-from /root/includes.txt
    repository 99xxxxa0 opened successfully, password is correct
    created new cache in /root/.cache/restic
    rclone: 2020/05/08 17:47:57 ERROR : locks: error listing: directory not found
    rclone: 2020/05/08 17:47:58 ERROR : index: error listing: directory not found
    rclone: 2020/05/08 17:47:58 ERROR : snapshots: error listing: directory not found
    
    Files:        3503 new,     0 changed,     0 unmodified
    Dirs:            2 new,     0 changed,     0 unmodified
    Added to the repo: 16.872 GiB
    
    processed 3503 files, 21.134 GiB in 1:02:56
    snapshot fdxxxxec saved
    

    Der erste Durchgang hat also etwa eine Stunde benötigt. Durch die Deduplikation der Daten, ist der Vorgang beim zweiten Durchgang viel schneller weil nur neue oder geänderte Daten gesichert werden. Und außerdem sind alle Daten AES-256 verschlüsselt. Also perfekt zur Ablage in irgendeiner Cloud 😉

    root@frank-MS-7C37:~# restic --password-file /root/passwd -r rclone:Nextcloud:HOME_UBUNTU backup --files-from /root/includes.txt
    repository 99xxxxa0 opened successfully, password is correct
    
    Files:          57 new,    41 changed,  3449 unmodified
    Dirs:            0 new,     2 changed,     0 unmodified
    Added to the repo: 22.941 MiB
    
    processed 3547 files, 21.137 GiB in 0:13
    snapshot c6xxxxe4 saved
    

    Wie ihr seht, hat der zweite Durchgang nur ein paar neue und geänderte Daten gesichert. Der Rest ist ja schon vorhanden. Und das kann man dann auch problemlos täglich, wöchentlich oder was auch immer mal eben schnell durchführen.

    Eines meiner absoluten Lieblingstool 🙂

  • 0 Stimmen
    2 Beiträge
    274 Aufrufe
    FrankMF

    Noch eine Ergänzung. Wenn ihr jetzt viele User habt und das nur auf eine Gruppe beschränken wollt, könnt ihr das so machen.

    Unter Apps, Nextcloud Assistant suchen und die gewünschten Gruppen eintragen. Fertig 😉

    197deae4-d72a-4729-bba7-bfa9b4bef334-grafik.png

  • Semaphore - Die API

    Verschoben Ansible
    2
    0 Stimmen
    2 Beiträge
    122 Aufrufe
    FrankMF

    Ich hasse schlecht lesbaren Code, scheint man sich bei Python so anzugewöhnen. Habe da nochmal was mit der langen Zeile getestet.

    stages: - deploy deploy: stage: deploy script: # $SEMAPHORE_API_TOKEN is stored in gitlab Settings/ CI/CD / Variables - >- curl -v XPOST -H 'Content-Type: application/json' -H 'Accept: application/json' -H "Authorization: Bearer $SEMAPHORE_API_TOKEN " -d '{"template_id": 2}' https://<DOMAIN>/api/project/2/tasks only: - master # Specify the branch to trigger the pipeline (adjust as needed)

    Hier noch was Dr. ChatGPT dazu schreibt

    631de9d4-b04d-4043-bfff-c5f2d1b6eea7-grafik.png

    Erledigt - läuft 🙂 Und verstanden habe ich es auch.

  • Kernel 5.19-rc1

    Quartz64
    2
    0 Stimmen
    2 Beiträge
    111 Aufrufe
    FrankMF

    Man kann dann den aktuell Kernel

    [root@frank-pc ~]# uname -a Linux frank-pc 5.17.0-3-MANJARO-ARM-Q64 #1 SMP PREEMPT Sat Jun 4 14:34:03 UTC 2022 aarch64 GNU/Linux

    mit diesem Befehl aktualisieren

    sudo pacman -S linux-rc linux-rc-headers

    Man wechselt dann vom Zweig linux-quartz64 auf linux-rc. Der Zweig linux-rc entspricht dem Mainline Kernel.

    Achtung! Zum Zeitpunkt der Erstellung des Beitrages crasht das Eure Installation!!

    Ursache ist, das es aktuell diesen Kernel

    linux-rc-5.18.rc7-7-aarch64

    installiert, dieser enthält aber keine Unterstützung für das Modell B.

    Und zum Nachschauen, ob schon was Neues da ist 😉

    [root@frank-pc ~]# pacman -Ss linux-rc linux-rc-headers core/linux-rc-headers 5.18.rc7-7 Header files and scripts for building modules for linux kernel - AArch64 multi-platform (release candidate)
  • Restic v0.12.1 released

    Restic
    1
    0 Stimmen
    1 Beiträge
    152 Aufrufe
    Niemand hat geantwortet
  • Ubuntu 20.04 Focal - Einrichtung

    Linux
    16
    0 Stimmen
    16 Beiträge
    2k Aufrufe
    FrankMF

    @reiner-zufall sagte in Ubuntu 20.04 Focal - Einrichtung:

    auto-save-session

    Interessant. Bitte poste, wenn Du was findest.

  • Restic - Backblaze B2 Cloud Storage

    Restic
    1
    0 Stimmen
    1 Beiträge
    364 Aufrufe
    Niemand hat geantwortet
  • IPTV Telekom & IPFire - igmpproxy

    Linux
    1
    0 Stimmen
    1 Beiträge
    610 Aufrufe
    Niemand hat geantwortet
  • Installation von Grav & NGinx & PHP7.2

    Angeheftet Verschoben Grav
    2
    0 Stimmen
    2 Beiträge
    1k Aufrufe
    FrankMF

    Nachdem ich den ROCKPro64 jetzt auf den Mainline umgestellt habe, lief meine Testinstallation von Grav nicht mehr.

    Hilfreiche Sache um das Problem zu lösen -> https://gist.github.com/GhazanfarMir/03bd1f1f770a3834d47274586d46ea62

    Ich bekam immer 502 Bad Gateway, Grund war ein nicht korrekt gestarteter php-pfm Service.

    rock64@rockpro64v2_0:/usr/local/bin$ sudo service php7.2-fpm start rock64@rockpro64v2_0:/usr/local/bin$ sudo service php7.2-fpm status ● php7.2-fpm.service - The PHP 7.2 FastCGI Process Manager Loaded: loaded (/lib/systemd/system/php7.2-fpm.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2018-08-16 20:15:20 CEST; 21s ago Docs: man:php-fpm7.2(8) Main PID: 3206 (php-fpm7.2) Status: "Processes active: 0, idle: 2, Requests: 3, slow: 0, Traffic: 0.2req/sec" Tasks: 3 (limit: 4622) CGroup: /system.slice/php7.2-fpm.service ├─3206 php-fpm: master process (/etc/php/7.2/fpm/php-fpm.conf) ├─3207 php-fpm: pool www └─3208 php-fpm: pool www Aug 16 20:15:19 rockpro64v2_0 systemd[1]: Starting The PHP 7.2 FastCGI Process Manager... Aug 16 20:15:20 rockpro64v2_0 systemd[1]: Started The PHP 7.2 FastCGI Process Manager.