Skip to content

Quartz64 - PCIe Schnittstelle

Verschoben Quartz64 - A
  • Ich habe ja schon ein wenig dazu geschrieben. Hier mal der direkte Vergleich zwischen einem ROCKPro64 und einem Quartz64.

    20210627_165708.jpg

    Hardware

    Samsung 970 EVO 500GB mit PCIe Adapter

    ROCKPro64

    lspci

    root@rockpro64:~# lspci
    00:00.0 PCI bridge: Fuzhou Rockchip Electronics Co., Ltd RK3399 PCI Express Root Port
    01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981
    

    Und aus dem ausführlichen Teil, also lspci -vvv

    LnkSta:	Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    Kernel driver in use: nvme
    Kernel modules: nvme
    

    dd

    root@rockpro64:~# dd if=/dev/zero of=test bs=512k count=2048 oflag=direct         
           2048+0 Datensätze ein
           2048+0 Datensätze aus
           1073741824 bytes (1,1 GB, 1,0 GiB) copied, 1,24522 s, 862 MB/s
    

    Quartz64

    lspci

    [frank@quartz64 ~]$ lspci
    00:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3568 Remote Signal Processor (rev 01)
    01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983
    

    Und aus dem ausführlichen Teil, also lspci -vvv

    LnkSta:	Speed 5GT/s (downgraded), Width x1 (downgraded)
    Kernel driver in use: nvme
    Kernel modules: nvme
    

    dd

     [root@quartz64 tmp]# dd if=/dev/zero of=test bs=512k count=2048 oflag=direct  
     2048+0 Datensätze ein
     2048+0 Datensätze aus
     1073741824 Bytes (1,1 GB, 1,0 GiB) kopiert, 3,51793 s, 305 MB/s
    

    Fazit

    Wir sehen also, das die PCIe- Schnittstelle, auf dem Quartz64, nicht mit so vielen Lanes an die CPU angeschlossen ist, wie auf dem ROCKPro64. Das sieht man auch deutlich an der Schreibgeschwindigkeit.

  • FrankMF FrankM verschob dieses Thema von Hardware am

  • 0 Stimmen
    1 Beiträge
    51 Aufrufe
    Niemand hat geantwortet
  • 0 Stimmen
    1 Beiträge
    101 Aufrufe
    Niemand hat geantwortet
  • 0 Stimmen
    2 Beiträge
    96 Aufrufe
    FrankMF
    Was geht? Funktion Status Bemerkung cpufreq ok *3 UART ja *5 LAN hat Fehler *1 USB3 ja ca. 210MB/s *2 PCIe ja ca. 296 MB/s, ist mit einer Lane angeschlossen *4 HDMI nein LAN *1 root@debian:~# iperf3 -c 192.168.3.213 Connecting to host 192.168.3.213, port 5201 [ 5] local 192.168.3.10 port 39124 connected to 192.168.3.213 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 434 KBytes 3.55 Mbits/sec 61 2.83 KBytes [ 5] 1.00-2.00 sec 475 KBytes 3.89 Mbits/sec 44 2.83 KBytes [ 5] 2.00-3.00 sec 396 KBytes 3.24 Mbits/sec 43 2.83 KBytes [ 5] 3.00-4.00 sec 318 KBytes 2.61 Mbits/sec 40 2.83 KBytes [ 5] 4.00-5.00 sec 315 KBytes 2.58 Mbits/sec 31 2.83 KBytes [ 5] 5.00-6.00 sec 396 KBytes 3.24 Mbits/sec 46 2.83 KBytes [ 5] 6.00-7.00 sec 396 KBytes 3.24 Mbits/sec 43 2.83 KBytes [ 5] 7.00-8.00 sec 396 KBytes 3.24 Mbits/sec 43 1.41 KBytes [ 5] 8.00-9.00 sec 396 KBytes 3.24 Mbits/sec 47 2.83 KBytes [ 5] 9.00-10.00 sec 317 KBytes 2.59 Mbits/sec 39 2.83 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 3.75 MBytes 3.14 Mbits/sec 437 sender [ 5] 0.00-10.00 sec 3.67 MBytes 3.08 Mbits/sec receiver iperf Done. root@debian:~# iperf3 -R -c 192.168.3.213 Connecting to host 192.168.3.213, port 5201 Reverse mode, remote host 192.168.3.213 is sending [ 5] local 192.168.3.10 port 39130 connected to 192.168.3.213 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 112 MBytes 941 Mbits/sec [ 5] 1.00-2.00 sec 112 MBytes 942 Mbits/sec [ 5] 2.00-3.00 sec 112 MBytes 942 Mbits/sec [ 5] 3.00-4.00 sec 112 MBytes 942 Mbits/sec [ 5] 4.00-5.00 sec 112 MBytes 942 Mbits/sec [ 5] 5.00-6.00 sec 112 MBytes 942 Mbits/sec [ 5] 6.00-7.00 sec 112 MBytes 942 Mbits/sec [ 5] 7.00-8.00 sec 112 MBytes 942 Mbits/sec [ 5] 8.00-9.00 sec 112 MBytes 942 Mbits/sec [ 5] 9.00-10.00 sec 112 MBytes 942 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.10 GBytes 943 Mbits/sec 370 sender [ 5] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec receiver iperf Done. USB3 *2 root@debian:~# lsusb Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. JMS578 SATA 6Gb/s Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Disk /dev/sda: 238.47 GiB, 256060514304 bytes, 500118192 sectors Disk model: Generic Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 05AB264B-738E-47BB-9F67-5C04CC24A736 Device Start End Sectors Size Type /dev/sda1 2048 500118158 500116111 238.5G Linux filesystem root@debian:~# mount /dev/sda1 /mnt/sda/ root@debian:~# cd /mnt/sda root@debian:/mnt/sda# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 81.5051 s, 211 MB/s -------------- root@debian:/# lsusb Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 003: ID 04e8:61f5 Samsung Electronics Co., Ltd Portable SSD T5 Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@debian:/mnt/sda# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 83.7618 s, 205 MB/s cpufreq *3 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_max_freq 1800000 1800000 1800000 1800000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1416000 1416000 1416000 1416000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1800000 1800000 1800000 1800000 root@debian:~# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1416000 1416000 1416000 1416000 PCIe NVMe SSD *4 root@debian:/mnt/nvme# dd if=/dev/zero of=sd.img bs=4M count=4096 oflag=direct 4096+0 records in 4096+0 records out 17179869184 bytes (17 GB, 16 GiB) copied, 58.0362 s, 296 MB/s

    Das soll laut Peter die maximal mögliche Geschwindigkeit der PCIe Schnittstelle sein. Diese Schnittstelle ist nur mit einer Lane an den Prozessor angeschlossen!

    UART

    Bitte drauf achten, diese Schnittstelle arbeitet mit Level Shifting, was billige Adapter oft nicht abkönnen. Habe ich hier im Beitrag ausführlich erklärt, mit passenden Adapter, wenn es so wie bei mir nicht funktionierte.

  • Quartz64 - Manjaro Mai 2022

    Verschoben Quartz64
    1
    0 Stimmen
    1 Beiträge
    98 Aufrufe
    Niemand hat geantwortet
  • Quartz64 Model B im Shop bestellbar

    Verschoben Quartz64
    1
    0 Stimmen
    1 Beiträge
    341 Aufrufe
    Niemand hat geantwortet
  • QuartzPro64

    Allgemeine Diskussionen
    1
    0 Stimmen
    1 Beiträge
    137 Aufrufe
    Niemand hat geantwortet
  • Quartz64 - dts File bearbeiten

    Angeheftet Verschoben Quartz64
    3
    0 Stimmen
    3 Beiträge
    264 Aufrufe
    FrankMF

    Ich weiß nicht, wonach ich gesucht habe, vermutlich nach

    apt install device-tree-compiler

    das gibt es im Manjaro Image nicht, es heißt ganz einfach dtc 😎 Also, ganz einfach mit

    pacman -S dtc

    installieren. Dann kann man sich diesen Umweg mit snapd sparen.

  • Wichtige Links zum Quartz64

    Angeheftet Verschoben Quartz64
    1
    0 Stimmen
    1 Beiträge
    214 Aufrufe
    Niemand hat geantwortet